JB/T 1579-1999 Accuracy test of precision horizontal spindle and rectangular table surface grinder

This standard specifies the requirements and inspection methods for the geometric accuracy and working accuracy of precision horizontal spindle and rectangular table surface grinders. This standard is applicable to horizontal spindle and rectangular table surface grinders with a worktable width of 125~800mm, general purpose and precision grade, and with a worktable that moves longitudinally. JB/T 1579-1999 Precision Inspection of Precision Horizontal Spindle and Rectangular Table Surface Grinders JB/T1579-1999 Standard Download Decompression Password: www.bzxz.net

ICS 25.080.50
Machinery Industry Standard of the People's Republic of China
JB/T1579-1999
Precision Horizontal Spindle and Reciprocating Table Surface Grinding Machine
1999-05-20 Issued
National Bureau of Machinery Industry
Precision Inspection
2000-01-01 Implementation
JB/TI579-1999
This standard is revised on the basis of JB1579-85 "Precision Horizontal Spindle and Reciprocating Table Surface Grinding Machine Precision". This standard is consistent with the technical content of JB1579-85, and has only been re-edited according to relevant regulations. The standards matching this standard are:
GB/T6469—1986
JB/T3382.11999bzxZ.net
JB/T3382—1983
Parameters of horizontal spindle and rectangular table surface grinder
Model spectrum of horizontal spindle and rectangular table surface grinder
Technical requirements for manufacturing and acceptance of horizontal spindle and rectangular table surface grinder This standard replaces JB1579—85 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of the Grinding Machine Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The responsible drafting unit of this standard: Hangzhou Surface Grinding Machine Research Institute. This standard was first issued in August 1975, revised for the first time in 1985, and this is the second revision. 1 Scope
Machinery Industry Standard of the People's Republic of China
Precision Horizontal Spindle and Reciprocating Table Surface Grinder
Precision Inspection
JB/T1579—1999
Replaces JB157985
This standard specifies the requirements and inspection methods for the geometric accuracy and working accuracy of precision horizontal spindle and reciprocating table surface grinders. This standard is applicable to horizontal spindle and reciprocating table surface grinders with a worktable width of 125~800mm, one purpose and precision grade, and a worktable with longitudinal movement.
2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB 17421.1-1998 General Rules for Machine Tool Inspection Part 1: Geometric Accuracy of Machine Tools under No-load or Finishing Conditions 3 General Requirements
3.1 When using this standard, reference should be made to the relevant provisions of GB/T17421.1, especially the installation before inspection, the idling temperature rise of the spindle and other components, the inspection method and the accuracy of the inspection tools. 3.2 Refer to the provisions of 3.1 in GB/T17421.1-1998 to adjust the installation level. The leveling must be in accordance with the method specified by the manufacturer. 3.3 Before inspection, the actual inspection sequence can generally be arranged according to the requirements of the installation and disassembly tools, inspection convenience, and thermal inspection items. 3.4 When the measured length is different from the length specified in this standard, the tolerance should be converted according to the measurable length according to the provisions of 2.3.1.1 in GB/T17421.1-1998. When the conversion result is less than 0.001mm, it is still calculated as 0.001mm. 3.5 When inspecting the working accuracy, the test piece should be inspected after fine grinding. 3.6 According to the agreement between the user and the manufacturer, the inspection items can be increased or decreased. 3.7 For the sake of simplicity, the schematic diagrams in the two chapters of pre-adjustment inspection and geometric accuracy inspection in this standard only include one form of machine tool schematic diagram. Approved by the State Machinery Industry Bureau on May 20, 1999, and implemented on January 1, 2000
JB/T15791999
t'l't'siI'ttz's
t'zits
1IZIZZIZSI
000[/0Z 0'00001/910'0
JB/T1579-1999
800°0
800°0
JB/T1579-1999
Xiong Yao Dangqi
Qian Dangqi
JB/T15791999
Qian Dangqi
00%/E00
Ci±cao
JB/T 15791999
2219s1219
JB/T 1579 1999
t'ttI's's 'I'tI's's
tvt's's +I'tI's's
:00/100
00/S10*0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.