Graphical symbols for use on equipment--Part 5:Common symbols for plastic machine

This part of GB/T 16273 specifies the general symbols for various plastic machinery features, operating instructions and functional status. This part applies to the operating controller (or console), indicators, connection sockets and nameplates of plastic machinery. GB/T 16273.5-2002 Graphical symbols for equipment Part 5: General symbols for plastic machinery GB/T16273.5-2002 Standard download decompression password: www.bzxz.net
This part of GB/T 16273 specifies the general symbols for various plastic machinery features, operating instructions and functional status. This part applies to the operating controller (or console), indicators, connection sockets and nameplates of plastic machinery.

1CS 01.DB0.20
National Standard of the People's Republic of China
GB/T16273.5—2002
Graphical symbols for use on equipment Part 5: Common symbols for plastic machine(IsO7000:1989.Graphical symbols Ioruse on equipment .-Indexandsynopsis.NEQ:
2002-08-05 Issued
People's Republic of China
General Administration of Quality Supervision, Inspection and Quarantine
2003-04.01 Implementation
/6273 Crescent moon graphic symbol is divided into three parts, and is now divided into six parts: Part 1 General symbols!
Part 2 General symbols for machine tools
Part 3 General symbols for equipment;
Part 4: Symbols with new symbols;
Part 1: Symbols for material processing machines,
Part 6: General symbols for transport machinery.
G1/T 16273-52002
This part is the fifth part of GB/16275, which specifies 73 common symbols for mechanical equipment. This part corresponds to GB/162799:198 Graphical symbols for equipment - Index and list (English) and is equivalent to [300] in terms of consistency. This part is based on S7000 or newly drafted, and all the embossed symbols are selected from [S1711]. This part is issued by China Standards Research Center
This part is divided into the National Technical Committee for the Use of Graphic Symbols for Plastic Machinery: This part is originated by China Standards Research Center, Nanjing Material Machinery Research Institute, and the drafters of this part are Chen Yuanqiao, Zhang Chong, Hu Dan, and Chang Dongbai.
Graphic symbols for equipment
Part 5. General symbols for plastic machinery
GA/T16273.5—202
This part of G616273 defines the symbols used to represent the characteristics, operating instructions and functional status of various plastic machinery. This part is applicable to ten types of plastic machinery operation controllers, control indicators, connection signs, etc. 2 Normative references
The following documents are referenced in this Part as of the date hereof: All subsequent amendments (including revisions or revisions) to this Part are not applicable to this Part. However, the parties to an agreement based on this Part may wish to consider whether these documents may be used. For undated references, the latest edition applies:
Gt Graphic number
(/16273.1 Equipment drawing number neg150) 7000GR16002.1-99? Graphic number HM Photo number Part 1: Formation of graphic symbols (ucv IS1 3461-1:_489
(1/5555) The terms in this part of GB16273 apply to this part. The general graphic symbols of plastic machinery are summarized in a simple way. The graphic symbols are shown in Table 1. 5 Application
5.1 The use of graphic symbols shall be subject to the registration date of 65Jiangsu 16902.11997. 5.2 When using graphic symbols, the shapes in Table 1 shall be proportionally enlarged or reduced. The graphic symbols in Table 1 shall not be included in the graphic symbols. Only the rigid symbols need to be prepared and applied. 5.4 In plastic machinery, if the general graphic symbols of the equipment are involved, they should be selected from GB/T16273.1. Table 1 Graphic Symbols for Plastic Machinery
Reading Graphic Symbols
Plastic Equipment
Plazt.caing 1:nin
sJut7)
GB/T 16273.5—2007
National shape
Table continued)
Plastic material supplier
I Plasrie xir g eylisdor
Arrwntlalu
Recognize the pollution fee
F:lier xe:ilr-l
Blowing products
lnw mnildrd n*ndicr
Receive mother address
Prietm sor blow ruoulding
Plastic leather type pull rod
Strctelersry
Blu.w nou.d:ng alie.
plasties
S700536
TS(0 700O:5R76)
15Q 7009:0671)
1SO YUOU(U3SG:
IS( 7O 8XR)
IN 7GNG(0332)
Graphic symbol
Hao 1(wisp)
Deep nail gas needlebZxz.net
K.nwtendlle
Blowing Na gas core (beating)
13low mantrl
Energy feeder with row push rod (material forming plastic)
Aeumilarar ith rjrornt las
Licb u.oulding
Regulztiot ol well :hicknaqy o1Jrekana
Specialized products
nieci.n-ouulded products
Lajcerion rtculd
With opened chemical surface
Plisleag ryl:uder wat pl.DgurGB/T16273.52007
1r7nnnn333
EX Tu00(0334)
IS) CUC(C34)
IS0 7cOG(0415)
ISO T000(n318)
IS 7UUC(C33)
[)TSS4)
e5/116273.5—2002
Figure will be symbol
Table 1 (continued)
Plasticizing machine with accumulator
Plasticsing oylincet withl s.ew Spraying fat·Account symbol
Noale-geeial
Mouth: closed
Nauexke -clixing
Spray end, open
Nr:Axle.gkning
Skin feeding clear cake
Nnpoln wijing
Close monitoring and control
Nozzie bcylung
Broken in the injection section 1.1 injection
Cut-uff sprue (inirer:on tr.anild-mg)
Sr) 7uuu(us4)
1S7009:5K65)
150 7X.X839
S07X7)
J3O UGUU88:
ES( 1,O11F.9)
S517G0G1067 3
Capsule 1 relatively
Injection calibration, flow manufacturing closure
Inkerion Taculd nne* clrd
Injection mold capital
Iojeetiod nouldrunner cpcn
Joint force, injection car or type
i Clanpuig forre, iniection uitid-E
Forming products
ComFtexxion-uoulded pr:xuct
Yanzhi Medical New Products
loar moulded jredh:=t
Forming mold
Corupiessieu nc ald
Protective out of difference: paragraph
ExrrssdesElkml
GR/T16273.5—2002
JSO 7000(0373)
IS() 7000(0879)
IS0(6(G381)
1S0 7U00.9:17
1S) 7 955)
1S 7<341)
CBT16273.5—2002
Figure Special Number
Installation Continuation)
Multiple strend dic (exluianaliny
Production
Siveel detaxluriun Jie?
Tuhr tle(rxtntaan dli.)
Inhrinr -ilm dir(exrnsic dis) Washing and packing according to the mountain music
Ceble cover:bg Lie texlusienJiel
Pulling machine
Pellering machine: TreictnrngHre
Plain and chaotic, general and
I'ryer.ger.tal
Jsr 7nin(ns12)
[S7000:0:4]
W0 7X23:2
1Sr 7OCJtJ3!u
ISO T10316)
s 72.(ee52
Graphic number
Table Bin)
Asia extension machine
E nlaricler
Nin rsll assem>ly
Katamura Masumae
Shce1 sreaking
FEael eEf [r 2latie msuldi:ug outer diameter sizing management (teacher material point type)
L'xterr.al xixing unit7Gi(aG3:
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.