
JB/T 2462.1-1999 Parameters and dimensions of multi-axis turret power heads, common components of modular machine tools
time:
2024-08-12 00:45:56
- JB/T 2462.1-1999
- in force
Standard ID:
JB/T 2462.1-1999
Standard Name:
Parameters and dimensions of multi-axis turret power heads, common components of modular machine tools
Chinese Name:
组合机床通用部件 多轴转塔动力头 参数和尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical manufacturing>>Machine tool devices>>25.060.99 Other machine tool devicesChina Standard Classification Number:
Machinery>>Metal Cutting Machine Tools>>J58 Combined Machine Tools
alternative situation:
JB 2462-78
Focal point Organization:
National Metal Cutting Machine Tool Standardization CommitteePublishing Department:
National Metal Cutting Machine Tool Standardization Committee Combined Machine Tool Branch

Skip to download
Summary:
JB/T 2462.1-1999 This standard is a revision of JB 2462-78 "Parameters and interchangeable dimensions of multi-axis turret power heads of common components of modular machine tools". Only editorial modifications have been made according to relevant regulations, and the main technical content has not changed. This standard specifies the series parameters and interchangeable dimensions of multi-axis turret power heads of modular machine tools. This standard is applicable to multi-axis turret power heads of turret-type modular machine tools as their automatic lines. This standard was first issued in 1978. JB/T 2462.1-1999 Parameters and dimensions of multi-axis turret power heads of common components of modular machine tools JB/T2462.1-1999 Standard download decompression password: www.bzxz.net

Some standard content:
1C25.6.99Www.bzxZ.net
Machinery Industry Standard of the People's Republic of China
JB/12462.1~2462.28-1999
Common Components for Combined Machine Tools
Published on 1990-05-21
State Machinery Industry Bureau
2(MI-01-1 Implementation
5B/T2462.1-1999
This standard is based on Part 2402-79 "Parameters and dimensions of multi-axis turret power heads for machine tools" and is consistent with the revised technical content of Part 2462-78. It only replaces B2462-7% from the date of implementation according to relevant regulations.
The standard was proposed by the National Machinery Standardization Technical Committee of the State Council and was approved by the National Machine Tool Branch of the State Council. This standard was first issued in 1978.
Machinery Industry Standard of the People's Republic of China
Common Parts of Combined Machine Tools
Parameters and Dimensions
Multi-axis turret power head
The standard is limited to combined machine tool multi-axis turret power head system The following standards contain the following parameters and dimensions: JBT2462.11999, 2462.78, and 2462.11999. The following standards contain the following parameters and dimensions: JBT2462.11999, 2462.78, and 2462.11999. The following standards contain the following parameters and dimensions: JBT2462.11999, 2462.11999, 2462.11999, 2462.11999. The following standards contain the following parameters and dimensions: JBT ... The following symptoms are released for the new stock of one-dimensional, 096 type
3 parameters and interchangeable dimensions
3.1 The main parameters of the multiple-axis or head are 20m:4m, 500, 63:8m and broken.
3.2 The other parameters and point defects of the multi-axis drug tower moving square head should comply with the provisions of the table [and table>, the new
single-sided
Xichi product
r year 5 mm estimate
★GT/V16.96-1979
L,L+$+40tm yuan
National Machinery Industry Bureau 19-05-20 approved
2000-U1-1 sales implementation
Unit 5
1 in accordance with
New products for continuous assembly
Medical surface
Absolute to surface distance
Step shaft diameter
School of Science and Technology
Kidney Examination Research
Door companion sample treatment axis design certification room
The seat fastening protection price
Cold shop and path
Headphone limit rate i
Effective road force
JB/TZ462.1-199
1 After the effect, the force is in the game platform axis war 1. The positive platform height is to ensure the certificate of the place bacteria. 500
4; 5: h
2a1960m
? Benefits of the cushioning direction, "Do not move the quality system and do not install, shoot and store 20mm design, 570
2:31360
a49600
JB/T2462.1*1999
**0*1x21*
w×w*o
$W× * *ti
rtierr
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/12462.1~2462.28-1999
Common Components for Combined Machine Tools
Published on 1990-05-21
State Machinery Industry Bureau
2(MI-01-1 Implementation
5B/T2462.1-1999
This standard is based on Part 2402-79 "Parameters and dimensions of multi-axis turret power heads for machine tools" and is consistent with the revised technical content of Part 2462-78. It only replaces B2462-7% from the date of implementation according to relevant regulations.
The standard was proposed by the National Machinery Standardization Technical Committee of the State Council and was approved by the National Machine Tool Branch of the State Council. This standard was first issued in 1978.
Machinery Industry Standard of the People's Republic of China
Common Parts of Combined Machine Tools
Parameters and Dimensions
Multi-axis turret power head
The standard is limited to combined machine tool multi-axis turret power head system The following standards contain the following parameters and dimensions: JBT2462.11999, 2462.78, and 2462.11999. The following standards contain the following parameters and dimensions: JBT2462.11999, 2462.78, and 2462.11999. The following standards contain the following parameters and dimensions: JBT2462.11999, 2462.11999, 2462.11999, 2462.11999. The following standards contain the following parameters and dimensions: JBT ... The following symptoms are released for the new stock of one-dimensional, 096 type
3 parameters and interchangeable dimensions
3.1 The main parameters of the multiple-axis or head are 20m:4m, 500, 63:8m and broken.
3.2 The other parameters and point defects of the multi-axis drug tower moving square head should comply with the provisions of the table [and table>, the new
single-sided
Xichi product
r year 5 mm estimate
★GT/V16.96-1979
L,L+$+40tm yuan
National Machinery Industry Bureau 19-05-20 approved
2000-U1-1 sales implementation
Unit 5
1 in accordance with
New products for continuous assembly
Medical surface
Absolute to surface distance
Step shaft diameter
School of Science and Technology
Kidney Examination Research
Door companion sample treatment axis design certification room
The seat fastening protection price
Cold shop and path
Headphone limit rate i
Effective road force
JB/TZ462.1-199
1 After the effect, the force is in the game platform axis war 1. The positive platform height is to ensure the certificate of the place bacteria. 500
4; 5: h
2a1960m
? Benefits of the cushioning direction, "Do not move the quality system and do not install, shoot and store 20mm design, 570
2:31360
a49600
JB/T2462.1*1999
**0*1x21*
w×w*o
$W× * *ti
rtierr
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 4706.20-2000 Special requirements for safety of tumble dryers for household and similar electrical appliances
- JB/T 9725-1999 Method for compiling model numbers of construction machinery products
- JB 8701-1998 Plate heat exchanger for refrigeration
- SY/T 5329-1994 Recommended indicators and analysis methods for water quality in clastic reservoirs
- GB/T 5009.55-2003 食糖卫生标准的分析方法
- HG 21596-1999 Slewing cover stainless steel manhole
- GB 4798.3-1990 Application environment conditions for electrical and electronic products Fixed use in weather-protected locations
- GB/T 8311-2002 Determination of tea powder and broken tea content
- GB/T 27405-2008 Criterion on quality control of laboratories - Microbiological testing of food
- JB/T 10045.5-1999 Thermal cutting and gas cutting surface quality sample
- JB/T 8582.5-2001 Shock absorber for agricultural transport vehicles
- JB/T 8031.1-1999 Circular tool setting blocks for machine tool fixture parts and components
- QB/T 3657.1-1999 Wood furniture finishing process Polyurethane varnish finishing process specification
- NY/T 718-2003 Good laboratory practice for toxicological safety evaluation of pesticides
- JJG 923-1996 Verification Regulation of Beer (EBC) Colorimeter
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:[email protected]