MT/T 630-1996 Specification for bellows negative pressure samplers for gas detection tubes
time:
2024-08-08 08:11:14
- MT/T 630-1996
- in force
Standard ID:
MT/T 630-1996
Standard Name:
Specification for bellows negative pressure samplers for gas detection tubes
Chinese Name:
气体检测管用蛇腹形负压式采样器技术条件
Standard category:
Coal Industry Standard (MT)
-
Date of Release:
1996-12-30 -
Date of Implementation:
1997-11-01
China Standard Classification Number:
>>>>D9 Mining>>Mining General>>D09 Health, Safety, Labor Protection
Drafter:
Yang WenzhengDrafting Organization:
Fushun Branch of China Coal Research InstituteFocal point Organization:
Coal Mine Safety Standardization Technical CommitteeProposing Organization:
Department of Science, Technology and Education, Ministry of Coal IndustryPublishing Department:
Ministry of Coal Industry of the People's Republic of China
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the structure, volume, technical requirements, test methods, inspection rules, marking, packaging and storage of accordion-shaped negative pressure samplers for gas detection tubes. This standard applies to accordion-shaped negative pressure samplers for gas detection tubes (hereinafter referred to as samplers) used in conjunction with longer gas detection tubes. MT/T 630-1996 Technical conditions for accordion-shaped negative pressure samplers for gas detection tubes MT/T630-1996 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 2921-1982 Classification and nomenclature of chemical reagents and gas chromatography stationary phases
- JB/T 3627.3-1999 Tools and accessories for assembly of modular fixtures - T-shaped four-jaw wrenches
- GB/T 3069.2-1986 Determination of naphthalene crystallization point
- GB/T 13400.1-1992 Terms used in network planning techniques
- JB/T 8808-1998 DLM2 electromagnetic clutch
- GB/T 19657-2005 Thermal test source lamps for heating tests on lamps
- GB/T 15391-1994 Dimensions, shapes and tolerances of cold-rolled steel strip with a width less than 600 mm
- JB/T 7055-1993 Types, main dimensions and basic parameters of booster tanks for mechanical seal systems
- GB/T 15423-1994 Codes for terms of delivery
- SJ 20240-1993 Verification Procedure for HP4284A Precision LCR Tester
- HG/T 2224-1991 Determination of average compressive strength of granular triple superphosphate
- JB/T 9990.1-1999 Spur bevel gear planing cutters Part 1: Basic types and dimensions
- JB/T 8492-1996 Basic parameters of single-action hydraulic press for sheet metal stamping
- HG/T 2840-1997 Water treatment agent aminotri(methylenephosphonic acid) (solid)
- JB/T 2302-1999 Double-tube mesh filter types, parameters and dimensions
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com