GB/T 15826.1-1995 General requirements for machining allowances and tolerances of hammer-forged steel free forgings
time:
2024-08-08 14:49:13
- GB/T 15826.1-1995
- Abolished
Standard ID:
GB/T 15826.1-1995
Standard Name:
General requirements for machining allowances and tolerances of hammer-forged steel free forgings
Chinese Name:
锤上钢质自由锻件机械加工余量与公差 一般要求
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-08-01 -
Date of Expiration:
2008-08-01
Standard ICS number:
25.010China Standard Classification Number:
Machinery>>Processing Technology>>J32 Forging
alternative situation:
Replaced JB 4249-1986; replaced by GB/T 21469-2008Procurement status:
DIN 7527
Release date:
1995-12-14Review date:
2004-10-14Drafting Organization:
Shanghai Mechanical and Electrical Industry AdministrationFocal point Organization:
National Forging Standardization Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Machinery Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the general requirements for the machining allowances and tolerances of steel free forgings on hammers and their use. This standard applies to free forgings of carbon steel and alloy steel with a carbon content not exceeding 0.9% and a total content of other alloy components not exceeding 4%. For free forgings that exceed the scope specified in this standard, the allowances and tolerances shall be determined by negotiation between the supplier and the buyer. GB/T 15826.1-1995 General requirements for machining allowances and tolerances of steel free forgings on hammers GB/T15826.1-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 15591-1995 Method for determining the reflectivity distribution diagram of commercial coal
- JB/T 6016-1992 Metallographic inspection of single cast piston rings for internal combustion engines
- JB/T 3627.5-1999 Tools and accessories for assembly of modular fixtures - Four-jaw wrench
- JB/T 9162.28-1999 Clamping rod dimensions
- JJG 130-1984 Liquid-in-Glass Thermometers for Working
- GB/T 4324.25-1984 Chemical analysis of tungsten - Inert gas fusion coulometric titration method for determination of oxygen content
- SY/T 6518-2001 Recommended practice for installing pumping unit protection devices
- SY 6502-2000 Regulations on the safety management of escape and life-saving equipment for shallow-water oil workers
- GB/T 5009.109-2003 Determination of isocarbophos residues in citrus fruits
- GB/T 4678.1-2003 Die casting parts Part 1: Template
- JB/T 1664-1999 Permanent Magnetic Dehydration Tank
- HG/T 20637.2-1998 Graphic symbols and text codes for automatic control engineering design
- JB/T 7010-1993 Ring cone planetary continuously variable transmission
- JB/T 2001.60-1999 Minimum liquid level valve for water system pump station (PN=31.5MPa)
- HG/T 2555-1993 Fluorescent brightener DCB
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com