GB 1790-1994 Pharmaceutical Vaseline
time:
1994-08-23 15:00:00
- GB 1790-1994
- Abolished
Standard ID:
GB 1790-1994
Standard Name:
Pharmaceutical Vaseline
Chinese Name:
医药凡士林
Standard category:
National Standard (GB)
-
Date of Release:
1994-08-23 -
Date of Implementation:
1995-06-01 -
Date of Expiration:
2003-12-01
China Standard Classification Number:
Petroleum>>Petroleum Products>>E42 Petroleum Wax
alternative situation:
GB 1790-1986; replaced by GB 1790-2003Procurement status:
Non-equivalent BP-1988
Skip to download
Summary:
GB 1790-1994 Medical Vaseline GB1790-1994 Standard download and decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Shilin
Medicine
Medical
Medicinal vaseline
Theme content and scope of application||tt ||This standard specifies the technical requirements, test methods, and inspection rules for pharmaceutical petroleum jelly. GB 1790— 94
replaces GB1790-86
This standard is applicable to high-viscosity petroleum lubricating oil fractions, wax paste obtained by dewaxing, blended with lubricating oil base oil, and then refined. Medical Vaseline. This product is suitable for preparing pharmaceutical ointments and skin protection ointments as raw materials. 2
Quoted standards
GB/T269 Determination of cone penetration of grease and petroleum grease GB/T8026 Determination of melting point of petroleum wax and petroleum grease droplets Pharmacopoeia of the People's Republic of China (1990 edition) Part 2 (Yellow , white) Vaseline SH/T0115 Dropping point determination method for greases and solid hydrocarbons SH0164 Petroleum product packaging, storage, transportation and delivery acceptance rules SH/T0229 Sampling method for solid and semi-solid petroleum products SH/T0406 Vaseline UV absorbance determination method 3 Product classification
The products covered by this standard are divided into two types: medical white petroleum jelly and medical yellow petroleum jelly according to the refining depth. 4 technical requirements
appearance
dropping point, heart
drip melting point,
hundred
UV Absorbance (290 nm)
Organic acid.mg Nac)H/g
Not greater than
Not greater than
Quality index
Medical white petroleum jelly|| tt||Medical yellow petroleum jelly
Uniform, odorless and flawless ointment, it should have
a certain degree of stringiness
lighter than colorimetric solution A
45~56|| tt||Lighter than colorimetric solution B
Report
Approved by the State Bureau of Technical Supervision on 1994-08-23 0.08
Test method
Visual inspection
Chinese Pharmacopoeia Part II Appendix page 57
SH/T 0115
GB/T 8026||tt| |SH/T 0406
Chinese Pharmacopoeia Part 2, page 133, page 617
Implemented on 1995-06-01
Acid storage degree
short ignition line slag,%
sulfide
not greater than
30. 1 mm
GB 1790—94
Continuation table
Quality index
Medical white petroleum jelly
None||tt ||0.05
Qualified
Medical yellow petroleum jelly
130~250
Test method
Chinese Pharmacopoeia Part 2, page 133, page 617bZxz.net
Chinese Pharmacopoeia Part 2, page 133, page 617
Chinese Pharmacopoeia, Part 2, page 133, page 617
Chinese Pharmacopoeia Part 2, appendix page 49
GB/T269
Note: 1) Colorimetric solution A: Take 7.8 mL of potassium dichromate solution for colorimetry, and add 0.2 mL of copper sulfate solution for colorimetry. Shake well, take 2.5 mL, and add water to make it 25 mL. 2) Colorimetric solution B: Take 2.0 mL of cobalt chloride solution for colorimetry and 6.0 mL of potassium dichromate solution for colorimetry, and add water to make it 10 mL. 5 Marking, packaging, transportation, storage
The packaging, marking, storage, transportation and delivery acceptance of this product are carried out in accordance with SH0164, and must be packed in clean iron drums. 6 Sampling
Sampling shall be carried out according to SH/T Center 229, and 2kg shall be taken for inspection and sample retention. Additional notes:
This standard was proposed by China Petroleum & Chemical Corporation and is under the technical control of Fushun Petrochemical Research Institute. This standard is drafted by the Chemical Industry Department of Jinling Petrochemical Company. The main drafter of this standard is Ma Yunsheng.
This label adopts the British Pharmacopoeia BP-88 "Pharmaceutical Vaseline". 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Shilin
Medicine
Medical
Medicinal vaseline
Theme content and scope of application||tt ||This standard specifies the technical requirements, test methods, and inspection rules for pharmaceutical petroleum jelly. GB 1790— 94
replaces GB1790-86
This standard is applicable to high-viscosity petroleum lubricating oil fractions, wax paste obtained by dewaxing, blended with lubricating oil base oil, and then refined. Medical Vaseline. This product is suitable for preparing pharmaceutical ointments and skin protection ointments as raw materials. 2
Quoted standards
GB/T269 Determination of cone penetration of grease and petroleum grease GB/T8026 Determination of melting point of petroleum wax and petroleum grease droplets Pharmacopoeia of the People's Republic of China (1990 edition) Part 2 (Yellow , white) Vaseline SH/T0115 Dropping point determination method for greases and solid hydrocarbons SH0164 Petroleum product packaging, storage, transportation and delivery acceptance rules SH/T0229 Sampling method for solid and semi-solid petroleum products SH/T0406 Vaseline UV absorbance determination method 3 Product classification
The products covered by this standard are divided into two types: medical white petroleum jelly and medical yellow petroleum jelly according to the refining depth. 4 technical requirements
appearance
dropping point, heart
drip melting point,
hundred
UV Absorbance (290 nm)
Organic acid.mg Nac)H/g
Not greater than
Not greater than
Quality index
Medical white petroleum jelly|| tt||Medical yellow petroleum jelly
Uniform, odorless and flawless ointment, it should have
a certain degree of stringiness
lighter than colorimetric solution A
45~56|| tt||Lighter than colorimetric solution B
Report
Approved by the State Bureau of Technical Supervision on 1994-08-23 0.08
Test method
Visual inspection
Chinese Pharmacopoeia Part II Appendix page 57
SH/T 0115
GB/T 8026||tt| |SH/T 0406
Chinese Pharmacopoeia Part 2, page 133, page 617
Implemented on 1995-06-01
Acid storage degree
short ignition line slag,%
sulfide
not greater than
30. 1 mm
GB 1790—94
Continuation table
Quality index
Medical white petroleum jelly
None||tt ||0.05
Qualified
Medical yellow petroleum jelly
130~250
Test method
Chinese Pharmacopoeia Part 2, page 133, page 617bZxz.net
Chinese Pharmacopoeia Part 2, page 133, page 617
Chinese Pharmacopoeia, Part 2, page 133, page 617
Chinese Pharmacopoeia Part 2, appendix page 49
GB/T269
Note: 1) Colorimetric solution A: Take 7.8 mL of potassium dichromate solution for colorimetry, and add 0.2 mL of copper sulfate solution for colorimetry. Shake well, take 2.5 mL, and add water to make it 25 mL. 2) Colorimetric solution B: Take 2.0 mL of cobalt chloride solution for colorimetry and 6.0 mL of potassium dichromate solution for colorimetry, and add water to make it 10 mL. 5 Marking, packaging, transportation, storage
The packaging, marking, storage, transportation and delivery acceptance of this product are carried out in accordance with SH0164, and must be packed in clean iron drums. 6 Sampling
Sampling shall be carried out according to SH/T Center 229, and 2kg shall be taken for inspection and sample retention. Additional notes:
This standard was proposed by China Petroleum & Chemical Corporation and is under the technical control of Fushun Petrochemical Research Institute. This standard is drafted by the Chemical Industry Department of Jinling Petrochemical Company. The main drafter of this standard is Ma Yunsheng.
This label adopts the British Pharmacopoeia BP-88 "Pharmaceutical Vaseline". 2
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 6765-1993 Technical conditions for special purpose industrial steam turbines
- GB 1984-2003 High voltage AC circuit breakers
- HG/T 2879.3-1997 Determination of silicon content in clay of rubber compound
- GB/T 9649.24-2001 The terminology classification codes of geology and mineral resources--Geoeconomy
- JB/T 10401.1-2004 Braking system of off-grid wind turbine generator set Part 1: Technical requirements
- GB/T 5150-2004 Aluminum-magnesium alloy powder
- GB/T 8046-1987 Layout of the alphabetic area of Mongolian character set keyboards for information processing and exchange
- MT/T 913-2002 Dimension series and technical requirements for hydraulic nuts and high-strength fasteners for mining
- JB/T 6361.2-1992 Countersunk head ring groove nails
- CB 1305-1998 Specification for torpedo homing control test equipment
- GB/T 15000.6-1996 Guidelines for Standard Samples (6) General Rules for Standard Sample Packaging
- GB/T 2861.6-1990 Type A guide bushing for die guides
- QB 2732-2005 Hydrolyzed collagen
- GB/T 5918-1997 Determination of mixing uniformity of compound feed
- GB/T 4857.14-1999 Packaging-Transport packages-Toppling test method
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com