GB/T 15813-1995 Separation and crushing of fireworks and firecrackers molding agent samples
time:
2024-08-08 15:00:36
- GB/T 15813-1995
- in force
Standard ID:
GB/T 15813-1995
Standard Name:
Separation and crushing of fireworks and firecrackers molding agent samples
Chinese Name:
烟花爆竹成型药剂 样品分离和粉碎
Standard category:
National Standard (GB)
-
Date of Release:
1995-01-02 -
Date of Implementation:
1996-08-01
Standard ICS number:
71.100.29China Standard Classification Number:
Chemicals>>Other Chemical Products>>G89 Explosive Products
Release date:
1995-12-08Review date:
2004-10-14Drafting Organization:
The 213th Research Institute of China Ordnance IndustryFocal point Organization:
National Fireworks and Firecrackers Standardization Technical CommitteePublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Light Industry Federation
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the requirements, preparation methods and safety technical regulations for fireworks and firecrackers molding agent samples. This standard is applicable to the preparation of fireworks and firecrackers molding agent samples other than those ignited by friction and impact. GB/T 15813-1995 Separation and crushing of fireworks and firecrackers molding agent samples GB/T15813-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB 10854-1989 Dimensions of steel structure welds
- GB 15218-1994 Standard for classification and grading of groundwater resources
- GB/T 29186.4-2021 Brand value factor evaluation Part 4: Innovation factor
- JB/T 6037-1992 General rules for identification of wires and cables for construction machinery
- GB/T 3139-1982 Test method for thermal conductivity of glass fiber reinforced plastics
- JB/T 6413-1992 Type and basic parameters of inlet air heating unit
- GB/T 15590-1995 Method for determination of microscopic coal and rock types
- GB/T 4759-1995 Measurement methods for exhaust mufflers of internal combustion engines
- JB/T 6498-1992 Valve structural elements Dimensions of valve disc and valve welding connection groove
- GB 16219-1996 Hygienic standard for chloroform in workshop air
- GB/T 8846-1988 Terminology of plastic molding dies
- JB/T 7235-1994 Test methods for four-wheeled agricultural transport vehicles
- GB 50041-1992 Code for design of boiler rooms
- JB/T 8680.2-1998 Technical requirements for three-phase asynchronous motors Part 2: Y2-E series (IP54) three-phase asynchronous motors (frame size 80~280)
- GB/T 2900.36-2003 Electrical terminology Electric traction
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]