JB/T 3411.4-1999 Dimensions of toolholders for fine-tuning disc turning tools

JB/T 3411.4-1999 JB/T 3411.4-1999 Fine-tuning disc turning tool shank dimensions JB/T3411.4-1999 Standard download decompression password: www.bzxz.net

ICS25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T3411.4—1999
Holder for circular tool with micro-adjuster Dimensions1999-05-20 Issued
State Machinery Industry Bureau
Implementation on 2000-01-01
1 Scope
Machinery Industry Standard of the People's Republic of China
Holder for circular tool with micro-adjustar DimensionsThis standard specifies the types and dimensions of the tool holder for micro-adjustable circular tool. 2 Types and dimensions
The types and dimensions shall be as specified in the following figures and tables. D
Marking example:
lF20mm fine-tuning disc turning tool arbor:
Arbor 20JB/T3411.41999
National Machinery Industry Bureau approved basic
Limit deviation
JB/T3411.4-1999
Replaced JB341483
Limit deviation
Limit deviation
±0090
Implementation on 2000-01-01
Note: The shape of the outer circle surface is designed according to needs. JB/T3411.4—1999Www.bzxZ.net
Appendix A
(Suggested Appendix)
Disc turning tool installation matching dimensions
Limit deviation
Limit deviation
Limit deviation
Mechanical industry standard
Fine adjustment disc turning tool shank dimensions
JB/T3411.4—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Issued by: Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2, Shouti South Road, Beijing: Postal Code 100044)*
Book size 880×1230
X number of characters xXX,XXX
Print sheets X/X
Xth printing in XX month, 19XX
Xth edition in XX month, 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.