GB 11674-1989 Hygienic standard for demineralized whey powder
time:
2024-08-06 10:37:25
- GB 11674-1989
- Abolished
Standard ID:
GB 11674-1989
Standard Name:
Hygienic standard for demineralized whey powder
Chinese Name:
脱盐乳清粉卫生标准
Standard category:
National Standard (GB)
-
Date of Release:
1989-09-05 -
Date of Implementation:
1990-05-01 -
Date of Expiration:
2005-10-01
Standard ICS number:
Food Technology >> 67.100 Milk and milk productsChina Standard Classification Number:
Medicine, Health, Labor Protection>>Health>>C53 Food Hygiene
alternative situation:
Replaced by GB 11674-2005
Review date:
2004-10-14Drafter:
Lu YongchangDrafting Organization:
Heilongjiang Provincial Health and Epidemic Prevention StationFocal point Organization:
Ministry of Health commissioned technologyProposing Organization:
Department of Health Supervision, Ministry of Health of the People's Republic of ChinaPublishing Department:
Ministry of Health of the People's Republic of China
Skip to download
Summary:
This standard specifies the nutritional and hygienic requirements for desalted whey powder. This standard applies to products made from cheese whey or casein whey, which are desalted by ion exchange, sterilized, concentrated, and spray-dried. Whey can refer to this standard. GB 11674-1989 Hygienic standard for desalted whey powder GB11674-1989 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Hygienic standard of demineralized whey powder
Hygienic standard of demineralized whey powderSubject content and scope of application
GB 11674—89
This standard specifies the nutritional and hygienic requirements of demineralized whey powder. This standard applies to products made from cheese whey or casein whey as raw materials, sterilized, concentrated and spray-dried after ion exchange desalination. Whey can refer to this standard. 2
Referenced standards
GB4789.1~4789.28 Food hygiene microbiological inspection GB11388 Demineralized whey powder
3 Sensory indicators
It has the taste and smell that whey powder should have, and shall not have sour taste or other peculiar smell; powdery, without lumps; uniform and consistent light yellow; no floccules and precipitation after washing with 65C warm water. bzxz.net
Physical and chemical indicators
According to GB11388.
5 Hygiene indicators
See Table 1 for hygiene indicators.
Phosphate
Lead (in Pb)
Calcium (in H)
Hexachlorobenzene
Bacterial indicators
See Table 2 for bacterial indicators.
Indicators approved by the Ministry of Health of the People's Republic of China from September 1989 to May 2005, mg/kg
Implemented on May 1, 2005
Total number of bacteria, pieces/8
Escherichia coli, pieces/100g
Mold, pieces/8
Pathogenic bacteria
Testing methods
According to GB4789.14789.28.
Additional Notes:
GB11674-89
This standard was proposed by the Health Supervision Department of the Ministry of Health of the People's Republic of China. This standard was drafted by the Heilongjiang Provincial Health and Epidemic Prevention Station. The main drafter of this standard was Lv Yongchang.
20 000
Not detectable
This standard is interpreted by the Ministry of Health's Food Hygiene Supervision and Inspection Institute, the technical unit entrusted by the Ministry of Health. 590
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Hygienic standard of demineralized whey powder
Hygienic standard of demineralized whey powderSubject content and scope of application
GB 11674—89
This standard specifies the nutritional and hygienic requirements of demineralized whey powder. This standard applies to products made from cheese whey or casein whey as raw materials, sterilized, concentrated and spray-dried after ion exchange desalination. Whey can refer to this standard. 2
Referenced standards
GB4789.1~4789.28 Food hygiene microbiological inspection GB11388 Demineralized whey powder
3 Sensory indicators
It has the taste and smell that whey powder should have, and shall not have sour taste or other peculiar smell; powdery, without lumps; uniform and consistent light yellow; no floccules and precipitation after washing with 65C warm water. bzxz.net
Physical and chemical indicators
According to GB11388.
5 Hygiene indicators
See Table 1 for hygiene indicators.
Phosphate
Lead (in Pb)
Calcium (in H)
Hexachlorobenzene
Bacterial indicators
See Table 2 for bacterial indicators.
Indicators approved by the Ministry of Health of the People's Republic of China from September 1989 to May 2005, mg/kg
Implemented on May 1, 2005
Total number of bacteria, pieces/8
Escherichia coli, pieces/100g
Mold, pieces/8
Pathogenic bacteria
Testing methods
According to GB4789.14789.28.
Additional Notes:
GB11674-89
This standard was proposed by the Health Supervision Department of the Ministry of Health of the People's Republic of China. This standard was drafted by the Heilongjiang Provincial Health and Epidemic Prevention Station. The main drafter of this standard was Lv Yongchang.
20 000
Not detectable
This standard is interpreted by the Ministry of Health's Food Hygiene Supervision and Inspection Institute, the technical unit entrusted by the Ministry of Health. 590
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 4498-1997 Determination of ash content in rubber
- QX/T 499-2019 Technical specifications for lightning protection of road traffic electronic monitoring systems
- HG 2264-1992 Types, main dimensions and markings of mechanical seals for kettles
- GB 18468-2001 Hygienic standard for p-dichlorobenzene in indoor air
- GB/T 6379.1-2004 Accuracy(trueness and precision)of measurement methods and results?Part 1:General principles and definitions
- GB/T 2978-1997 Passenger car tire series
- YY/T 0457.3-2003 Characteristics of optoelectronic X-ray image intensifiers for medical electrical equipment Part 3: Determination of brightness distribution and non-uniformity
- GB 4793.5-2001 Particular requirements for hand-held probes for safe electrical measurements and tests on electrical equipment for measurement, control and laboratory use
- GB/T 5757-1986 Determination of water content of ion exchange resin
- NY/T 788-2004 Guideline on pesticide residue trials
- GB 17914-1999 Specifications for storage and preservation of combustible and explosive goods
- JB/T 502-1991 Spiral discharge sedimentation centrifuge type and basic parameters
- GB/T 8478-2003 Aluminum alloy door
- GB/T 29193-2012 Alphabetic code for incoterms
- JJG 124-2005 Verification Regulation of Amperemeters Voltmeters Wattmeters and Ohmmeters
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com