JB/T 5814.4-1991 Basic parameters of special equipment for wires and cables Part 4: Cabling equipment

This standard specifies the series and basic parameters of wire and cable cabling equipment. This standard applies to the equipment for twisting the cores of various types of wires and cables with rubber insulation, plastic insulation and paper insulation. This standard does not apply to the equipment for twisting cable core parts, which should be specified by another sub-standard. JB/T 5814.4-1991 Basic parameters of special equipment for wires and cables Part 4: Cabling equipment JB/T5814.4-1991 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
Special Equipment for Wires and Cables
Basic Parameters
Part 4: Cabling Equipment
Subject Content and Scope of Application
This standard specifies the series and basic parameters of cabling equipment for wires and cables. JB/T5814.4-91
Replaces JB3080-82
This standard applies to the twisting equipment for twisting the cores of various types of wires and cables with rubber insulation, plastic insulation and paper insulation. This standard does not apply to the twisting equipment for cable core components, which should be specified by another sub-standard. 2 Models
2.1 The series models of cabling equipment are shown in Table 1. 2.2 The product marking of cabling equipment should be specified in its type and size standards. Table 1
Series Model
3 Basic Parameters
Cage Type Cabling Machine Series
Windling Type Cabling Machine Series
Bow Type Cabling Machine Series
3.1 Basic parameters of CL series cabling machines shall comply with the provisions of Table 2. 3.2 Basic parameters of CP series cabling machines shall comply with the provisions of Table 3. 3.3 Basic parameters of CG series cabling machines shall comply with the provisions of Table 4. 3.4 Basic parameters of CS series cabling machines shall comply with the provisions of Table 5 (to be determined). Table 2 Basic parameters of CL series cabling machines
Main parameters
Specification code Effective line
400/6+12
400/6+
630/6+12
630/12+
12+1810.0
Approved by the Ministry of Machinery and Electronics Industry on October 17, 1991 Shaft hole
12022.5°
Common ratio series
Main purpose
Applicable to soft structure conductor cable cabling
Filling device
Wire coiling and paying offwwW.bzxz.Net
Device
Number of heads/
Number of heads/
n/exhn/d
48/160
Specifications
Traction device
Specifications
500630
Wire take-up device
Specifications
800/1 600|1000
1992-10-01implementation
Specification code
1000/3
Main parameters
1000/1+31000
1000/6
1600/3
1600/1+3
2000/3
2000/1+3
Main parameters
Take-up reel
16001600
2000200 0
25002500
31503150
JB/T5814.4—91
Continued Table 2
TwistingTwisting
Common RatioGrade
Filling Device
Number of Heads/
48/200
48/250
Basic Parameters of CP Series Cabling Machine
Hauling Equipment
Burning Package Making
Device
Number of Heads/
Specifications Grid
Configuration specification
Take-up device
Configuration specification
25002000
L type, D type, W type
Parameters of auxiliary device
Parameters of twisted rotating body
Traction specification
2×800
Traction speed
Paying device
(1000/
630/1+3
630/1+4
630/1+5
630/1 +6 | |tt | t||1250/1+3
1250/1+4
1250/1+5
1250/1+6
1 600/1+3
1 600/1+4
1600/1+5
1600/1+6
Additional instructions:
JB/T5814.4-91
Table 4 Basic parameters of CG series cabling machine Type B (trial) machine
Number of reels and
Configuration
Inlet wire diameter
24~3036~500
Filling device
This standard was proposed and managed by Shanghai Cable Research Institute of the Ministry of Machinery and Electronics Industry. This standard was drafted by Shanghai Cable Research Institute and other units. The main drafter of this standard is Wang Shanqing.
Parameters of auxiliary devices
Center height
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.