JB/T 9162.16-1999 Dimensions of cylindrical head screws
time:
2024-08-11 18:22:22
- JB/T 9162.16-1999
- in force
Standard ID:
JB/T 9162.16-1999
Standard Name:
Dimensions of cylindrical head screws
Chinese Name:
圆柱头螺钉 尺寸
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.01 General Machine ToolsChina Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
ZB J44001.16-87
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9162.16-1999 JB/T 9162.16-1999 Dimensions of cylindrical head screws JB/T9162.16-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
JCS 25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
·Machinery Industry Standard of the People's Republic of China Cylindrical head screws
Kaurled head cap screws-DimansiaswwW.bzxz.Net
This standard specifies the types and sizes of head screws. Types and sizes
Types and sizes are as follows: D
Marking example:
α-M6, L=13mm net rod head probe nail mark burst needle M6×15T9162.16—1999
National Machinery Industry Exhibition 1999-05-20 approved 6
JB/T9162.16-1H
Generation 7J44(01.1687
2000-01-01 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T9162.1-9162.48--1999
The parts and units of inspection jig1999-05-20 Issued
State Machinery Industry Bureau
2000-01-01 Implementation
·Machinery Industry Standard of the People's Republic of China Cylindrical head screws
Kaurled head cap screws-DimansiaswwW.bzxz.Net
This standard specifies the types and sizes of head screws. Types and sizes
Types and sizes are as follows: D
Marking example:
α-M6, L=13mm net rod head probe nail mark burst needle M6×15T9162.16—1999
National Machinery Industry Exhibition 1999-05-20 approved 6
JB/T9162.16-1H
Generation 7J44(01.1687
2000-01-01 implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 22554-2010 Linear calibration using reference materials
- GB 2504-1989 Marine cast steel flange (four-position)
- JB/T 9313-1999 Special fine pitch threads for optical instruments
- GB/T 15047-1994 Test method for torsional rigidity of plastics
- JB/T 9220.1-1999 Chemical analysis methods for acidic slag of foundry cupola furnaces General principles and general provisions
- JB/T 9720-2001 Performance test method for transmissions of construction machinery
- GB/T 14856-1993 Calculation method for interference to high frequency radiotelephone channels of coast stations
- QB/T 2749-2005 Trimethylpyrazine
- JB/T 6615-1993 Technical requirements for boron carbide sealing rings for mechanical seals
- JB/T 3411.1-1999 Dimensions of flexible toolholders
- GB/T 4437.1-2000 Aluminium and aluminium alloy hot extruded tubes Part 1: Seamless round tubes
- JB/T 5868-1991 General technical requirements for printed winding DC servo motors
- JB/T 8821-1998 WGJ type intermediate shaft drum gear coupling type, parameters and dimensions
- JB/T 6628-1993 Flexible graphite composite reinforced (plate) pad
- GB 5107-1985 Hose connectors for welding and cutting
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]