SL 237-1999 Geotechnical Testing ProcedureSL 237-1999
time:
2025-02-14 21:28:26
- SL 237-1999
- in force
Standard ID:
SL 237-1999
Standard Name:
Geotechnical Testing Procedure
Chinese Name:
土工试验规程 SL 237-1999
Standard category:
Water Conservancy Industry Standard (SL)
-
Date of Release:
1999-03-25 -
Date of Implementation:
1999-04-15
alternative situation:
Replaces SD 128-1984 SD 128-1986 SD 128-1987 SD S01-1979
publishing house:
China Water Resources and Hydropower PressPublication date:
1999-04-15
Drafting Organization:
Nanjing Hydraulic Research InstituteFocal point Organization:
Ministry of Water Resources of the People's Republic of ChinaPublishing Department:
Ministry of Water Resources of the People's Republic of China
Description (Translated English) / downloadSkip to download
Summary:
This standard applies to the identification, naming and description of engineering soils in order to make qualitative evaluations of soil properties. This standard also applies to all types of engineering soils. This standard does not apply to sand and stone used in organic soil concrete. SL 237-1999 Geotechnical Test Procedure SL 237-1999 SL237-1999 Standard download decompression password: www.bzxz.net
- Recommended standards
- GB/T 5615-1985 Names, definitions and codes of heat treatment conditions of steel castings
- GB 15201-1994 Hygienic standard for the limit of cadmium in food
- GB/T 5009.144-2003 Determination of isofosfos-methyl residues in plant-derived foods
- SJ/T 10227-1991 Methods of determination for viscosity of potassium silicate solution for use in electronic industry
- GB 8143-1987 Inspection methods for shellac products
- SY 5614-1993 Rock fluorescence microscopy identification method
- YC/T 167-2003 Test method for expansion rate of cut tobacco
- GB 18282.1-2000 Chemical indicators for sterilization of medical and health care products Part 1: General
- GB/T 4789.9-2003 Food hygiene microbiology test Campylobacter jejuni test
- QB/T 2055-2005 Decorative light bulbs
- GB/T 15826.7-1995 Machining allowances and tolerances of hammer-forged steel free forgings - Step shafts
- GB 12340-1990 1:25 000, 1:50 000, 1:100 000 topographic map aerial photogrammetry industry specifications
- JB/T 8415-1996 Technical requirements for timing gears of internal combustion engines
- JB/T 5968-1991 Types and basic parameters of liquid-viscous speed regulators
- GB/T 24534.2-2009 Cereals and pulses—Determination of hidden insect infestation—Part 2:Sampling
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com