GB/T 5288-1985 Precision of gantry guide rail grinding machines

GB/T 5288-1985 Precision of gantry guide rail grinding machine GB/T5288-1985 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
Precision of Gantry Guide Grinding Machine
Slldeways grinding schines with two columns--Testing of the accuracy This standard is applicable to gantry guide grinding machines with ordinary accuracy for general purposes. This standard refers to the international standard ISO4703--1977 "Precision Test of Gantry Guide Grinding Machine". UDC621.925.08
GB 5288-85
The order of geometric accuracy test items listed in this standard does not represent the order of actual test. In order to facilitate the installation and disassembly of test tools and test, the test can be carried out in any order. 1 General requirements
1.1 When using this standard, refer to JB2670-82 "General Rules for Precision Test of Metal Cutting Machine Tools", especially the installation before precision test, the idling temperature rise of the spindle and other components, the test method and the accuracy of the test tool. 1.2 Before the machine tool precision test, the installation level of the machine tool must be adjusted first. The adjustment method and the specific requirements to be achieved shall be specified by the manufacturer and described in the machine tool manual.
1.3 When inspecting the working accuracy, the test piece shall be inspected after fine grinding. 1. When the actual measured length is different from the length specified in this standard, the tolerance shall be converted according to the length that can be measured according to the provisions of Item 2.3.1.1 of IB2670. When the conversion result is less than 0.001mm, it shall still be calculated as 0.001mm. 1.5 When inspecting the machine tool, the inspection items can be increased or decreased according to the agreement between the user and the manufacturer. Issued by the State Bureau of Standards on August 1, 1985
Implemented on June 1, 1986
GB B288--85
2'z'1''g\2'z's'2'g'e'z''z'g“
1'z'l'p'g''z*2'1'2'g't'z'z'1'2'g0
“Fragrance
001/200
GB 5288-85
E''8's
't*g*+'2'e's*z'''g
900:000 01
100'000 01 ~ 0009<
200*00000000
20*0:0002 0001
10*0*0001
2000000
90*0*000 01
P0*0*000 01 ~ 0009
80* 0* 0109 ~ 0002
20*0+0002~ 0001
10'0 0001>
GB 5288—85
&&'l'g's
It'2't'l's'I''3f's
005/20
80 *0*0009
20 *0*0009>
百国本
GB 528—85
1'2'z'3''g'2'2'1''s
2'z'l'z's
20 *0 *000 01 ~ 0009<
20*0 D009 ~ 000<
ST000002~0001
10°0 :0001 >
OT/STo0
GB 5288—85
z't'i's\s
2'z'z'?*+*s
"千乐
0t/900*0
001/+00*0
000/900*0
*001/900*0bzxZ.net
Hpidao
GB 5288-85
z'2'9's'1'z'7'9's
Z'z't'9'9*'z't'9's
GB5288—85
Z'f'z't'g'g't'z'1's's
008 / 10*0
GB.5286—85
'z'2't''s''z'2'v's
Z'f'z'l's's'1'?'l's's
00/STO*||t t||DOE/TO\0
GB5286—85
2'*+*'z'z'g'1'
：0008
T0*0*0001>
wosmwos× wwos
GE B288-85
z't'l'''z'z's't'e
2000001
200008
sto0*0009
070*0 0002 >
physical sensitivity
GB6288--85
2'z'1''s'z'\'b'z'*e*l'8
000 01~0008<
*000B ~ 0009
10005 ~0002
01000002
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.