JB/T 2967.1-1999 Accuracy of cross-section woodworking circular saws
time:
2024-08-04 05:41:04
- JB/T 2967.1-1999
- in force
Standard ID:
JB/T 2967.1-1999
Standard Name:
Accuracy of cross-section woodworking circular saws
Chinese Name:
横截木工圆锯机 精度
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-14 -
Date of Implementation:
2000-01-01
Standard ICS number:
Wood technology>>woodworking equipment>>79.120.10 Woodworking machineryChina Standard Classification Number:
Machinery>>General Processing Machinery and Equipment>>J65 Woodworking Machine Tools and Machine Tools
alternative situation:
JB 2971-1984Procurement status:
ISO 7008 NEQ
Focal point Organization:
National Woodworking Machine Tools and Cutting Tools Standardization CommitteePublishing Department:
Fuzhou Woodworking Machine Tool Research Institute
Description (Translated English) / downloadSkip to download
Summary:
JB/T 2967.1-1999 This standard adopts the corresponding test items in ISO 7008 "Terms and acceptance conditions for single saw blade woodworking circular saws with or without moving worktable". This standard is a revision of JB 2971-84 "Precision of cross-cutting circular saws for woodworking". During the revision, only editorial changes were made according to relevant regulations, and the technical content was not changed. This standard specifies the geometric accuracy and working accuracy requirements and test methods of cross-cutting circular saws for woodworking. This standard is applicable to manually fed single saw blade cross-cutting circular saws with a saw blade diameter of 315~1000mm. This standard was first issued on February 11, 1984. JB/T 2967.1-1999 Precision of cross-cutting circular saws for woodworking JB/T2967.1-1999 standard download decompression password: www.bzxz.net
- Recommended standards
- SY/T 0077-1993 Design specification for natural gas condensate recovery
- GB/T 11299.15-1989 Satellite communication earth station radio equipment measurement methods Part 3: Subsystem combination measurement Section 5: Radio tracking and control
- JJG 537-2006 Verification Regulation of Fluorescence Spectrophotometer
- QB/T 1522-1992 Terminology of shoemaking machinery and equipment
- JB/T 3411.13-1999 Die Jacket Dimensions
- GB/T 3075-1982 Metal axial fatigue test method
- JB/T 5133-1991 Die-cast magnesium alloys for rock drilling machinery and pneumatic tools
- GB/T 3372-2000 Wheel rims for tractors and agricultural and forestry machinery
- SY/T 5276-2000 Determination of flexural strength, compressive strength and gas permeability of artificial core for chemical sand control
- GB/T 37521.1-2019 Security check for anti-explosives at key place—Part 1:Foundations
- GB 5237.2-2004 Aluminium alloy building profiles Part 2: Anodised and coloured profiles
- GB/T 39666-2020 Classification and codes of government hotline service
- HG/T 2385-1992 Grey cast iron cooling tubes for soda ash cast iron towers
- GB/T 26998-2011 Examination and assessment for professional managers
- JB/T 10394.1-2002 General technical conditions for painting equipment Part 1:Fabricating parts
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com