Technical standard of polyethene coating for buried steel pipeline

This standard is formulated to ensure the quality of extruded polyethylene anti-corrosion layer of buried steel pipeline, extend its service life and improve its economic benefits. This standard is applicable to the design, production and construction acceptance of extruded polyethylene anti-corrosion layer of buried steel pipeline. Extruded polyethylene anti-corrosion layer can be divided into normal temperature type (N) with long-term working temperature not exceeding 50℃ and high temperature type (H) with long-term working temperature not exceeding 701C. In addition to complying with the provisions of this standard, the design, production and construction acceptance of extruded polyethylene anti-corrosion layer of buried steel pipeline shall also comply with the provisions of relevant national mandatory standards in force. SY/T 0413-2002 Technical Standard for Polyethylene Anti-corrosion Layer of Buried Steel PipelineSY/T0413-2002 Standard download decompression password: www.bzxz.net
This standard is formulated to ensure the quality of extruded polyethylene anti-corrosion layer of buried steel pipeline, extend its service life and improve its economic benefits. This standard is applicable to the design, production and construction acceptance of extruded polyethylene anti-corrosion layer of buried steel pipeline. The extruded polyethylene anti-corrosion layer can be divided into normal temperature type (N) with a long-term working temperature not exceeding 50°C and high temperature type (H) with a long-term working temperature not exceeding 701°C. In addition to complying with the provisions of this standard, the design, production and construction acceptance of the extruded polyethylene anti-corrosion layer of buried steel pipelines shall also comply with the provisions of the current national mandatory standards.

1 General Principles
Petroleum and Natural Gas Industry Standard of the People's Republic of China Technical Standard for Polyethylene Anticorrosion Coatings for Buried Steel Pipelines Approval Department: National Economic and Trade Commission Approval Date: 2002-05-28
Implementation Date: 2002-08-01
SY/T 0413—2002
Replaces SY/T4013—1995 www.bzxz.net
1.0.1 This standard is formulated to ensure the quality of extruded polyethylene anticorrosion coatings for buried steel pipelines, extend their service life, and improve economic benefits. 1.0.2 This standard applies to the design, production, and construction acceptance of extruded polyethylene anticorrosion coatings for buried steel pipelines. Extruded polyethylene anticorrosion coatings can be divided into normal temperature type (N) with a long-term working temperature not exceeding 50°C and high temperature type (H) with a long-term working temperature not exceeding 70°C. 1.0.3 In addition to complying with the provisions of this standard, the design, production, and construction acceptance of extruded polyethylene anticorrosion coatings for buried steel pipelines shall also comply with the provisions of the relevant current national mandatory standards. 2 Anti-corrosion layer structure
2.0.1 Extruded polyethylene anti-corrosion layer is divided into two-layer structure and three-layer structure. The bottom layer of the two-layer structure is adhesive and the outer layer is polyethylene; the bottom layer of the three-layer structure is epoxy powder coating, the middle layer is adhesive, and the outer layer is polyethylene. 2.0.2 The thickness of the anti-corrosion layer shall comply with the provisions of Table 2.0.2. The thickness of the anti-corrosion layer at the weld shall not be less than 70% of the value specified in Table 2.0.2.
Table 2.0.2 Thickness of anti-corrosion layer
Nominal diameter of steel pipe DN
DN≤100
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.