JB/T 2001.11-1999 Types and dimensions of square flanges for water systems (PN=10MPa)
time:
2024-08-14 17:11:11
- JB/T 2001.11-1999
- in force
Standard ID:
JB/T 2001.11-1999
Standard Name:
Types and dimensions of square flanges for water systems (PN=10MPa)
Chinese Name:
水系统 方附接法兰 型式与尺寸(PN=10MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2011-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical CommitteePublishing Department:
Metallurgical Equipment Standardization Technical Committee
Skip to download
Summary:
JB/T 2001.11-1999 This standard is a revision of JB 2011-84 "Hydraulic press square attachment flange type and size (Pg = 100 × 100000Pa)". This standard specifies the type and size of square attachment flanges. This standard is applicable to hydraulic systems with a nominal pressure of 10MPa. This standard was first issued on January 1, 1984. JB/T 2001.11-1999 Water system square attachment flange type and size (PN = 10MPa) JB/T2001.11-1999 standard download decompression password: www.bzxz.net
Some standard content:
IC.s$ 23.110
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system
Square attached flange
Type and size
Water system-Square attached flangeTypeaadsice
PN=10 MPa)
This standard specifies the types and sizes of some attachment methods. This standard is applicable to wave pressure systems with a nominal pressure of 10MPa. The provisions contained in the referenced standard
JAT2001.1E—1999
Rong 2911-4
constitute the provisions of this standard through reference in this standard. This standard is published as of: The editions shown are valid. All standard departments and parties using technical standards should explore the possibility of using the latest edition of the following standards: JH20015-999 Types and sizes of copper barriers for water systems 3 Types and sizes Www.bzxZ.net
3.1 The type should comply with the provisions of two:
d D, 2 5
2-Frequency: 3-Flange: 4-Connection: 5 Copper pad Figure 1
Approved by the National Machinery Industry Bureau on 1999-06-28 Implementation on 2000-01-01
JB/T2001.11-199g
0912210E1
521:11100 1/8
5[[1002
tT Lar
Elllooz Lut
HEI1G0K LHI
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system components
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Water system
Square attached flange
Type and size
Water system-Square attached flangeTypeaadsice
PN=10 MPa)
This standard specifies the types and sizes of some attachment methods. This standard is applicable to wave pressure systems with a nominal pressure of 10MPa. The provisions contained in the referenced standard
JAT2001.1E—1999
Rong 2911-4
constitute the provisions of this standard through reference in this standard. This standard is published as of: The editions shown are valid. All standard departments and parties using technical standards should explore the possibility of using the latest edition of the following standards: JH20015-999 Types and sizes of copper barriers for water systems 3 Types and sizes Www.bzxZ.net
3.1 The type should comply with the provisions of two:
d D, 2 5
2-Frequency: 3-Flange: 4-Connection: 5 Copper pad Figure 1
Approved by the National Machinery Industry Bureau on 1999-06-28 Implementation on 2000-01-01
JB/T2001.11-199g
0912210E1
521:11100 1/8
5[[1002
tT Lar
Elllooz Lut
HEI1G0K LHI
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 19610-2004 Definition and measurement principle of cigarette ventilation
- JB/T 9221-1999 Test method for effective bentonite and effective coal powder in green sand for casting
- JB/T 51213-1999 Feed mill product quality classification
- GB/T 15497-2003 Enterprise STANDARD system—Technical STANDARD system
- JGJ 106-1997 Code for high strain dynamic testing of pile foundations JGJ106-97
- JB/T 8532-1997 Pulse jet bag filter
- GB 18408-2001 Photometric performance of rear license plate lighting devices for motor vehicles and trailers
- JB/T 3411.124-1999 Dimensions of tool bar quick change device
- GB 50221-1995 Steel structure engineering quality inspection and assessment standard GB50221-95
- JB/T 7259-1994 Centrifugal blowers for sintering plants
- HY/T 146-2011 Technical regulation for division of marine major function oriented zone
- JB/T 9017-1999 Air cushion pallet
- BB/T 0066-2017 Polyethylene extrusion foaming packaging materials
- JB/T 7966.1-1999 Die and mold milling cutters Part 1: Cylindrical ball nose end mills with straight shank
- GB 19079.8-2005 Opening conditions and technical requirements for sports venues Part 8: Shooting areas
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com