
HG/T 3064-1999 Determination of 45μm sieve residue of precipitated hydrated silicon dioxide in rubber compounding ingredients
time:
2024-08-12 18:44:27
- HG/T 3064-1999
- Abolished
Standard ID:
HG/T 3064-1999
Standard Name:
Determination of 45μm sieve residue of precipitated hydrated silicon dioxide in rubber compounding ingredients
Chinese Name:
橡胶配合剂 沉淀水合二氧化硅45μm筛余物的测定
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1999-04-20 -
Date of Implementation:
2000-12-01 -
Date of Expiration:
2008-10-01
Standard ICS number:
Rubber and plastic industry>>Rubber raw materials and plastic raw materials>>83.040.30 Auxiliary materials and additives for plasticsChina Standard Classification Number:
Chemicals>>Rubber Products and Auxiliary Materials>>G49 Carbon Black
alternative situation:
Replaces HG/T 3064-1989; replaced by HG/T 3064-2008Procurement status:
ISO 5794-1-1994 MOD

Skip to download
Summary:
HG/T 3064-1999 Determination of 45μm sieve residue of precipitated hydrated silicon dioxide in rubber compound HG/T3064-1999 Standard download decompression password: www.bzxz.net
- Recommended standards
- NY/T 600-2002 Selenium-enriched tea
- GB/T 325.1-2008 Packing containers - Steel drums - Part 1:General specifications
- QB/T 1573-1992 Push plate for household sewing machines
- GB/T 18814-2002 AC devices for small boat electrical systems
- CB/T 3858-1999 Performance parameters of anchor windlasses and anchor capstans
- GB/T 19557.1-2004 General directives for the conduct of tests of distinctness,uniformity and stability for new varieties of plants
- SY 5747-1995 Safety rules for offshore oil construction projects
- GB 8319-2003 Food additives Mentha asiatica oil
- JB/T 2001.14-1999 Types and dimensions of oval connection flanges for water systems (PN=31.5MPa)
- GB 16895.4-1997 Electrical installations in buildings Part 5: Selection and installation of electrical equipment Chapter 53: Switchgear and controlgear
- HG/T 2660-1995 Polyurethane enamel of various colors (two-component)
- GB/Z 18620.1-2002 Specification for the inspection of cylindrical gears Part 1: Inspection of tooth surfaces on the same side of the gear teeth
- GB/T 3478.4-1995 Dimensions of cylindrical spur involute splines with 45° pressure angle
- GB/T 3673-1995 Phthalocyanine Green G
- GB 50038-1994 Code for Design of Civilian Air Defense Basements
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com