
GB/T 3047.6-1986 Basic dimensions of desktop enclosures for electronic equipment
time:
2024-08-11 11:02:54
- GB/T 3047.6-1986
- Abolished
Standard ID:
GB/T 3047.6-1986
Standard Name:
Basic dimensions of desktop enclosures for electronic equipment
Chinese Name:
电子设备台式机箱基本尺寸系列
Standard category:
National Standard (GB)
-
Date of Release:
1986-04-04 -
Date of Implementation:
1987-01-01 -
Date of Expiration:
2007-08-01
Standard ICS number:
Electronics >> 31.240 Mechanical components for electronic equipmentChina Standard Classification Number:
Electronic Components and Information Technology>>Electronic Measurement and Instrumentation>>L89 Power Supply, Power Supply Device
alternative situation:
Replaced by GB/T 3047.6-2007
Review date:
2004-10-14Drafting Organization:
Standard Drafting GroupFocal point Organization:
National Technical Committee for Comprehensive Standardization of Electrical and Electronic Equipment StructurePublishing Department:
National Standardization AdministrationCompetent Authority:
National Standardization Administration

Skip to download
Summary:
GB/T 3047.6-1986 Basic dimensions of desktop enclosures for electronic equipment GB/T3047.6-1986 Standard download decompression password: www.bzxz.net

Some standard content:
National Standard of the People's Republic of China
Series of basic dimensions of cases for electronic equlpment
This standard specifies the basic dimension series of electronic equipment desktop cases. Basic dimensions of the case (see the figure below)
B, or B
UDC621.3-2
GB 3047.6—86
The width, height H and depth D of the case are the dimensions of the main structure of the case, excluding the dimensions of handles, feet, fasteners, decorative parts and any other accessories. 2 Basic size series of chassis
2.1 Series 1
Dimension series of chassis width B, height H, depth D (see Table 1): Table 1
43.68.1,132.5,177.0,221.5,265.9,310.3,354.8426 (105.9),(212.6),(319.3)553151,20,250,300,350,400,450,500,550,600: When H is 354.8mm, the value can be selected according to Table 3 of GB3047.1-82 "Basic size series of panels, racks and cabinets". ② H, D, and B in Table 2 of this standard are allowed to be combined. The diameter in brackets is restricted for use.
The desktop chassis composed of Series I can be installed in a rack or cabinet that meets the requirements of the second part of GB3047.1-82. 2.2 Series II
Dimension series of chassis width Bz, height H, depth D (see Table 2): Issued by the National Bureau of Standards in 198604-04
Trial in 198701-01
GB 8047.6-86
78, 100, 122, 144, 166, 188, 210, 232, 251mmwwW.bzxz.Net
100, 120, 140.160, 180, 200, 220, 240, 2B0, 320, 360, 400, 440, 480, 520, 560160. 200. 240, 280.320. 360. 400. 440, 480, 520., 560, 600 The desktop case composed of series II can be matched with the plug-in specified in GB3047.4-86 "Basic size series of plug-in boxes and plug-ins with a height system of 44.45mm".
Additional remarks:
This standard is proposed by the Ministry of Electrical Industry of the People's Republic of China. The main drafters of this standard are Zheng Huaixin, Zhang Zhilong, Wang Heng, Lin Zhaojun, Liang Mingzhe, Liu Lianfu, Li Guijiang, Zeng Xianguo, Zheng Zishao, Xu Xiangrong, Li Yongjia, and Mu Hongsheng.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Series of basic dimensions of cases for electronic equlpment
This standard specifies the basic dimension series of electronic equipment desktop cases. Basic dimensions of the case (see the figure below)
B, or B
UDC621.3-2
GB 3047.6—86
The width, height H and depth D of the case are the dimensions of the main structure of the case, excluding the dimensions of handles, feet, fasteners, decorative parts and any other accessories. 2 Basic size series of chassis
2.1 Series 1
Dimension series of chassis width B, height H, depth D (see Table 1): Table 1
43.68.1,132.5,177.0,221.5,265.9,310.3,354.8426 (105.9),(212.6),(319.3)553151,20,250,300,350,400,450,500,550,600: When H is 354.8mm, the value can be selected according to Table 3 of GB3047.1-82 "Basic size series of panels, racks and cabinets". ② H, D, and B in Table 2 of this standard are allowed to be combined. The diameter in brackets is restricted for use.
The desktop chassis composed of Series I can be installed in a rack or cabinet that meets the requirements of the second part of GB3047.1-82. 2.2 Series II
Dimension series of chassis width Bz, height H, depth D (see Table 2): Issued by the National Bureau of Standards in 198604-04
Trial in 198701-01
GB 8047.6-86
78, 100, 122, 144, 166, 188, 210, 232, 251mmwwW.bzxz.Net
100, 120, 140.160, 180, 200, 220, 240, 2B0, 320, 360, 400, 440, 480, 520, 560160. 200. 240, 280.320. 360. 400. 440, 480, 520., 560, 600 The desktop case composed of series II can be matched with the plug-in specified in GB3047.4-86 "Basic size series of plug-in boxes and plug-ins with a height system of 44.45mm".
Additional remarks:
This standard is proposed by the Ministry of Electrical Industry of the People's Republic of China. The main drafters of this standard are Zheng Huaixin, Zhang Zhilong, Wang Heng, Lin Zhaojun, Liang Mingzhe, Liu Lianfu, Li Guijiang, Zeng Xianguo, Zheng Zishao, Xu Xiangrong, Li Yongjia, and Mu Hongsheng.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG/T 3139.2-2001 Vertical reducer for kettle XL series cycloid pinwheel reducer
- QB/T 1431-1992 Methyl cedryl ketone
- JB/T 2224-2000 Technical requirements for large AC three-phase four-pole synchronous motors
- HG/T 2961-1999 Industrial cuprous oxide
- NY 644-2002 Safety technical requirements for feed mills
- GB 15215-1994 Performance requirements for Global Maritime Distress and Safety System (GMDSS) Digital Selective Calling (DSC) equipment
- JJF 1207-2008 Calibratioin Specification for Cylindrical Measuring Pin
- GB/T 5326-1997 Combed polyester-cotton blended printed and dyed fabrics
- GB/T 8627-1999 Test method for smoke density of burning or decomposition of building materials
- GB 50220-1995 Urban road traffic planning and design specifications
- JB/T 8715-1998 Acceptance specification for slewing mechanism of truck crane and tire crane
- GB/T 19660-2005 Industrial automation systems and integrated machine tool numerical control coordinate systems and motion nomenclature
- GB/T 5657-1995 Technical requirements for centrifugal pumps (Class III)
- GB/T 5121.10-1996 Chemical analysis methods for copper and copper alloys - Determination of cobalt content
- SJ 2245-1982 Gas-filled microwave switching tubes,Type RX-7
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com