JB/T 3364.1-1999 Horizontal Circular Saw Machine Parameters

JB/T 3364.1-1999 This standard is a revision of JB 3364-83 "Parameters of Horizontal Circular Saw Machines". During the revision, only editorial modifications were made according to relevant regulations, and the main technical content remained unchanged. This standard is part of the JB/T 3364 "Horizontal Circular Saw Machine" series of standards, which includes the following three parts: JB/T 3364.1-1999 Parameters of Horizontal Circular Saw Machines JB/T 3364.2-1999 Spectrum of Horizontal Circular Saw Machine Series JB/T 3364.3-1999 Technical Conditions of Horizontal Circular Saw Machines The standards supporting this standard are: JB/T 3866.1-1999 Spectrum of Circular Saw Machine Series JB/T 3866.2-1999 Connection Dimensions of Spindle Ends of Circular Saw Machines This standard specifies the parameters of horizontal circular saw machines. This standard applies to newly designed horizontal circular saw machines for cold cutting metal. This standard was first issued in July 1983. JB/T 3364.1-1999 Parameters of Horizontal Circular Saw Machines JB/T3364.1-1999 Standard download decompression password: www.bzxz.net

ICS25.080.30
Machinery Industry Standard of the People's Republic of China
JB/T3364.1-1999
Horizontal Circular Saw Machine,
Published on May 20, 1999
National Bureau of Machinery Industry
Implementation on July 1, 1999
JB/T3364.1-1999
This standard is revised on the basis of JB3364-83 "Parameters of Horizontal Circular Saw Machine".bZxz.net
This standard is consistent with the technical content of JB3364-83, and has only been re-edited according to relevant regulations. This standard is part of the JB/T3364 "Horizontal Circular Saw Machine" series of standards. This series of standards includes the following three parts: JB/T 3364.1—1999
JB/T 3364.2—1999
JB/T3364.31999
Horizontal circular sawing machine
Horizontal circular sawing machine
Horizontal circular sawing machine
Standards matching this standard include:
JB/T3866.1—1999
JB/T 3866.21999
Circular sawing machine
Circular sawing machine
Precision inspection
Technical conditions
Series spectrum
Spindle end connection dimensions
This standard replaces JB336483 from the date of implementation. This standard is proposed by the National Technical Committee for Standardization of Metal Cutting Machine Tools. This standard is under the jurisdiction of the Sawing Machine Branch of the National Technical Committee for Standardization of Metal Cutting Machine Tools. The responsible drafting unit of this standard is Hunan Machine Tool Factory. This standard was first issued in July 1983.
1 Scope
Machinery Industry Standard of the People's Republic of China
Horizontal Circular Saw Machine
This standard specifies the parameters of horizontal circular saw machines. Parameters
This standard applies to newly designed horizontal circular saw machines for cold cutting metal. 2 Referenced Standards
JB/T3364.1-1999
Replaces JB336483
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard was published, the versions shown were all valid. All standards will be revised. All parties using this standard should explore the possibility of using the latest version of the following standards GB/T61301985 Panel Circular Saw
3 Parameters
The type of horizontal circular saw machine is shown in Figure 1. The machine parameters should comply with the provisions of Table 1. Figure 1
Maximum circular saw blade diameter D
(According to GB/T6130)
Maximum cutting material diameter d
Approved by the State Machinery Industry Bureau on May 20, 1999500
Implemented on July 1, 1999
Mechanical Industry Standards
Horizontal Circular Saw Machine Parameters
JB/T33641—1999
Mechanical Standardization Research Institute of the Ministry of Machinery Industry Published and distributed Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2, Shouti South Road, Beijing: Postal Code 100044)*
Format 880×1230
First edition in XX month, 1999
Print run 1-500
Number of words xxX,XxX
Printed sheets X/X
First printing in XX month, 1999
Price XXXXX Yuan
99-223X
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.