JB/T 3096-1999 Automatic band saw sharpening machine parameters

JB/T 3096-1999 This standard is a revision of JB 3096-82 "Parameters of Automatic Band Saw Sharpening Machines". During the revision, only editorial changes were made according to relevant regulations, and the technical content remained unchanged. This standard specifies the parameters of automatic band saw sharpening machines. This standard is applicable to automatic band saw sharpening machines for grinding general toothed woodworking band saw blades. This standard was first issued on May 12, 1982. JB/T 3096-1999 Parameters of Automatic Band Saw Sharpening Machines JB/T3096-1999 Standard download decompression password: www.bzxz.net

iCS79.120.10
Machinery Industry Standard of the People's Republic of China
JBT3096-1999
Automatic Band Saw Sharpener
1999-{5-14 Issued
National Machinery Industry Bureau
Implementation on 2000-01-01
JB/T3096—1999
This standard is a revision of JB309682, Automatic Band Saw Sharpener. During the revision, only the editorial revision was made according to the relevant regulations, and the technical content remained unchanged.
This standard replaces JB3096 from the date of implementation
This standard was proposed by the National Technical Committee for Standardization of Machine Tools and Cutting Tools. This standard is under the jurisdiction of the State Machine Tool Research Institute. The responsible drafting unit of this standard is Shenyang Woodworking Machine Tool Factory. This standard was first issued on May 12, 1982. 2
Machinery Industry Standard of the People's Republic of China
Automatic band saw grinding machine
This technical standard specifies the integral parameters of automatic band saw grinding machine
This standard applies to the automatic band saw grinding machine for general tooth shape wood T. Band saw blade
JB/T3096-1999
Announcement B3 (9682
The type of automatic band saw grinding machine is shown in Figure 1 [without limiting its body structure, the parameters are in accordance with the provisions of Table 1. H
Number Name Www.bzxZ.net
Maximum tooth of the base!
Grindable tooth per minute
Wheel linear speed
National Machinery Industry Bureau 1999-05-14 Approved 16
2000-01-01 Implementation
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.