JB/T 3320.1-2000 Technical requirements for small brushless three-phase synchronous generators

This standard specifies the type, basic parameters and dimensions, technical requirements, inspection rules and test methods, as well as marking, packaging and quality assurance period of small brushless three-phase synchronous generators driven by reciprocating internal combustion engines (hereinafter referred to as generators). This standard applies to small brushless three-phase synchronous generators with a rated frequency of 50 H: driven by reciprocating internal combustion engines. JB/T 3320.1-2000 Technical conditions for small brushless three-phase synchronous generators JB/T3320.1-2000 Standard download decompression password: www.bzxz.net

Mechanical Industry Standard of the People's Republic of China
JB/T3320.1
2000-04-24
Wa Xian Ji Dongwww.bzxz.net
2000-10-01
JB/T3320.12000
This standard is based on GB/T1 and GBT755-2000 "Rotating Electrical Machines - Ratings and Performance" (idtEC60034-1 (1996)) GB/T15548-1995 "Three-phase Synchronous Reciprocating Internal Combustion Engine Driven Motors" This standard is a revision of JB3320-1983 "Technical Conditions for Small Brushless Three-Phase Synchronous Generators" to make it as consistent as possible with international standards in terms of technical content. This standard consists of the following two parts:
1 JB/T3320.1-2000 "Technical Conditions for Small Brushless Three-Phase Synchronous Generators" 2 JB/T3320.2--2000 "Technical Conditions for Small Single-Phase Synchronous Generators". Appendix A and Appendix B of this standard are informative appendices. From the date of implementation, this standard will replace JB3320-[983. This standard is proposed and managed by the National Technical Committee for Standardization of Rotating Electrical Machines. This standard was drafted by the Shanghai Electric Science Research Institute. The main drafter of this standard: Ni Wen.
鸡咬馨魁哇艺鑫
艺瘦绝网
JB/T3320.12000
JB33201983
This standard specifies the type, basic parameters and dimensions, technical requirements, inspection rules and test methods, as well as marking, packaging and quality assurance period of small brushless three-phase synchronous generators (hereinafter referred to as generators) driven by reciprocating internal combustion engines. This standard applies to small brushless three-phase synchronous generators with a rated frequency of 50Hz driven by reciprocating internal combustion engines. 2 Reference standards
The provisions contained in the following standards constitute the provisions recommended by this standard through reference in this standard. When the standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB 1911990 ||tt | 4824—1996
GRT 4942.1—1985
GB 10068—2000
GB 10069—1988
GB 1235[—1990
GB/T 12665—1990
Packaging, storage and transportation pictorial symbols
Rotating electrical machines—Ratings and performance (idtEC:60034—1:199G)Motor structure and installation type code (e9YIEC60034—71972)Three-machine synchronous motor test method
Rotating and machine cooling method (eqvIEC60034—61991)Rotating electrical machine size and output power level
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.