QB/T 2212.22-1996 Construction tools (brick and tile) Seam slitter

This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of seam chutes. This standard applies to No. 402 seam chutes specified in QB/T 2212.1 "Terms of Construction Tools (Bricks and Tiles)". QB/T 2212.22-1996 Construction Tools (Bricks and Tiles) Seam Chutes QB/T2212.22-1996 Standard download decompression password: www.bzxz.net

QB/T2212.22—1996
This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBJ47001-1985 "Terms of Construction (Masonry) Tools", ZBJ47002--1985 "General Technical Conditions of Construction (Masonry) Tools", and ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into industry standards. In the overall structure of the standard, the terminology of construction tools, general technical conditions and their product standards are retained, and the original ZBJ47003-1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" is cancelled, and some of its relevant provisions are merged into the general technical conditions. The product standards are retained according to the numbers in the terminology, and a "Diamond Masonry Shovel" product standard is added. This standard changes the word "bricks and tiles" in the brackets of the original name to "bricks and tiles", and puts it after the standard name "construction tools", so that the hand tools used in construction work are more standardized, and a clear limitation is made in the scope of application. This standard is a supporting standard, and the terminology and general technical conditions are based on it. The technical content in the original standard that has been proven to be suitable for my country's situation in practice is retained. The main dimensions in the product standard have been optimized, several specifications have been added, and the limit deviation has been indicated. This standard has modified and improved some quality indicators.
From the date of implementation of this standard, ZBJ4700147003-1985 will be abolished at the same time. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Tool Hardware Standardization Center. The drafting units of this standard: Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian Housing Equipment Tool General Factory, Shanghai Fengxian Tool Factory No. 3, etc.
The main drafters of this standard: Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende. This standard is entrusted to the National Tool and Hardware Standardization Center for interpretation. 647
Light Industry Standard of the People's Republic of China
Construction Tools (Bricks and Tiles)
Seam Slips
QB/T 2212.22
2—1996
This standard specifies the product classification, technical requirements, test methods, inspection rules and packaging, marking, transportation and storage of seam slips. This standard applies to No. 402 seam slips specified in QB/T2212.1 "Terms of Construction Tools (Bricks and Tiles)". 2 Referenced Standards
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. QB/T2212.1—1996 Terminology of Construction Tools (Bricks and Tiles) QB/T2212.2—1996 General Technical Conditions for Construction Tools (Bricks and Tiles) 3 Product Classification
The type of the seam slide is shown in Figure 1.
3.2 Main Dimensions
The main dimensions of the seam slide shall be as specified in Table 1. Slide Board Length
Limit Deviation
Main Dimensions
Slide Board Width
Note: Special types and other dimensions may not be restricted by this table. Approved by China Light Industry General Association on March 22, 1996
-r KAON KAca-
Limit deviation
Slide plate thickness
Implemented on December 1, 1996
4 Technical requirements
QB/T2212.221996
Technical requirements for seam slides shall comply with the provisions of Chapter 4 of QB/T2212.2-1996. 5 Test methodsWww.bzxZ.net
5.1 Dimension inspection
Measured with universal measuring tools.
5.2 Inspection of other items
Conducted in accordance with the provisions of Chapter 5 of QB/T2212.2-1996. Inspection rules
Conformed to the provisions of Chapter 6 of QB/T2212.2-1996. Packaging, marking, transportation and storage
shall be in accordance with the provisions of Chapter 7 of QB/T2212.2-1996. 649
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.