HG/T 20519.19-1992 Spring Summary Table
time:
2024-08-14 10:03:22
- HG/T 20519.19-1992
- in force
Standard ID:
HG/T 20519.19-1992
Standard Name:
Spring Summary Table
Chinese Name:
弹簧汇总表
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1993-01-18 -
Date of Implementation:
1993-04-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Technical Drawing>>01.100.01 Technical Drawing General 71.010China Standard Classification Number:
>>>>G0 Engineering Construction>>Raw Materials Industry, Communications, Broadcasting Engineering>>P72 Petrochemical, Chemical Engineering
Description (Translated English) / downloadSkip to download
Summary:
HG/T 20519.19-1992 Spring Summary Table HG/T20519.19-1992 Standard Download Decompression Password: www.bzxz.net
Standard contentSome standard content:
Spring summary table
HG 20519.19-92
Spring summary table
HG 20519.19-92bZxz.net
This table should be compiled based on the pipe rack table of the project and the calculation results of the stress calculation. 2 Spring model:
(1) Variable spring hanger see GB10182-88 or CD42B5-89, (2) Constant force spring hanger see GB10181-88 or JB2654-81. 3 The number of springs refers to the actual number of springs in the spring rack. 4 This table should be compiled at the same time as the pipe rack table.
5 This table is used as the basis for procurement and installation.
Draw and compile based on the area as a unit.
See example table
Spring storage summary table
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
HG 20519.19-92
Spring summary table
HG 20519.19-92bZxz.net
This table should be compiled based on the pipe rack table of the project and the calculation results of the stress calculation. 2 Spring model:
(1) Variable spring hanger see GB10182-88 or CD42B5-89, (2) Constant force spring hanger see GB10181-88 or JB2654-81. 3 The number of springs refers to the actual number of springs in the spring rack. 4 This table should be compiled at the same time as the pipe rack table.
5 This table is used as the basis for procurement and installation.
Draw and compile based on the area as a unit.
See example table
Spring storage summary table
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- CB/T 462-1996 Ventilation grilles
- SJ 20027-1992 General specification for solid-state lasers
- CB/T 295-2000 Mushroom-shaped ventilator for ships
- JB/T 6677.2-1993 Tractors and machinery for agriculture and forestry, lawn and garden machinery - Position and method of control of lawn and garden machinery
- JB/T 7505-1994 Ion Plating Terminology
- QB/T 2265-1996 Classification, designation and numbering of parts and components of mechanical timing instruments Classification, designation and numbering of parts and components of pin-type alarm clocks
- GB/T 587-1993 Marine flange bronze stop valve
- NY/T 396-2000 Procedural regulations regarding the environment quality monitoring of water for agricultural use
- JB/T 7658.6-1995 Air cooler for ammonia refrigeration equipment
- GB 15740-1995 Performance requirements for automobile anti-theft devices
- MT/T 964-2005 Classification of lead content in coal
- GB/T 39419-2020 Grades of tsunami
- GB/T 17980.51-2000 Pesticide-Guidelines for the field efficacy trials(Ⅰ)-Herbicides against weeds in no-crop field
- HG 2613-1994 Paclobutrazol TC
- JB/T 9160.1-1999 Dimensions of the feed rod for single-spindle turret automatic lathe
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com