GB 16209-1996 Hygienic standard for polypropylene in workshop air

This standard specifies the maximum permissible concentration of polypropylene in the air of a workshop and the monitoring and inspection methods. This standard applies to enterprises that produce and use polypropylene. GB 16209-1996 Hygienic Standard for Polypropylene in Workshop Air GB16209-1996 Standard download decompression password: www.bzxz.net

National Standard of the People's Republic of ChinabzxZ.net
Health standard for polypropylene in the air of workplace1 Subject content and scope of application
This standard specifies the maximum allowable concentration of polypropylene in the air of workplace and the monitoring and inspection method. This standard applies to enterprises that produce and use polypropylene. 2
Referenced standards
GB5748 Determination of dust in workplace air 3 Hygienic requirements
The maximum allowable concentration of polypropylene in workplace air is 10 mg/m2. Monitoring and inspection methods
The determination of polypropylene concentration in workplace air shall be carried out in accordance with GB5748. 5 Supervision and implementation
Health supervision agencies at all levels are responsible for the implementation of this standard. Additional remarks:
This standard was proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by the Liaoning Provincial Institute of Labor Hygiene. The main drafters of this standard are Fang Yuxiang, Xiao Xingyuan, Yong Ailun and Liu Zhanyuan. GB16209-1996
This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases, Chinese Academy of Preventive Medicine, entrusted by the Ministry of Health. Approved by the State Bureau of Technical Supervision on April 3, 1996 1.0
Implementation on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.