QB/T 2556-2002 Design regulations for cast iron drying cylinders for papermaking machinery
time:
2024-08-08 07:05:04
- QB/T 2556-2002
- Abolished
Standard ID:
QB/T 2556-2002
Standard Name:
Design regulations for cast iron drying cylinders for papermaking machinery
Chinese Name:
造纸机械用铸铁烘缸设计规定
Standard category:
Light Industry Standard (QB)
-
Date of Release:
2002-09-21 -
Date of Implementation:
2002-12-01 -
Date of Expiration:
2008-09-01
Standard ICS number:
Papermaking Technology >> 85.100 Papermaking Industry EquipmentChina Standard Classification Number:
Light Industry, Cultural and Living Supplies>>Light Industry Machinery>>Y91 Papermaking Machinery Comprehensive
publishing house:
China Light Industry PressISBN:
155019.2506Publication date:
2002-11-01
Drafter:
Jiang Zhongwen, Fang Ying, Jiang Shifang, Ma Yanling, Ye Jincao, Liu Fengming, Zhao Yubing, Zhang GongwenDrafting Organization:
Light Industry Hangzhou Mechanical and Electrical Design InstituteFocal point Organization:
National Technical Committee for Light Industry Machinery StandardizationProposing Organization:
China Light Industry FederationPublishing Department:
State Economic and Trade Commission of the People's Republic of China
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the basic requirements and calculation formulas for the design of cast iron drying cylinders for papermaking machinery. This standard applies to drying cylinders and blanket drying cylinders (hereinafter referred to as "drying cylinders") with an outer diameter of no more than 3800mm and a maximum working pressure of no more than 0.8MPa for papermaking machines, paperboard machines and pulp machines. QB/T 2556-2002 Design requirements for cast iron drying cylinders for papermaking machinery QB/T2556-2002 Standard download decompression password: www.bzxz.net
- Recommended standards
- QB/T 2507-2001 Composite film bag making machine
- JB/T 7710-1995 Microstructure inspection of thin-layer carbonitriding or thin-layer carburizing steel parts
- JB/T 2847-1999 Multi-contact high-pressure molding machine types and basic parameters
- GB 16381-1996 Diagnostic criteria and treatment principles for occupational dental erosion
- GB/T 14929.2-1994 Determination of aldicarb residues in peanut kernels, cottonseed oil and peanut oil
- GB/T 3517-2002 Determination of plasticity retention rate (PRI) of natural rubber
- QB/T 2629-2004 Electrolytic manganese dioxide for mercury-free alkaline zinc-manganese dioxide batteries
- QB/T 2423-1998 Polyvinyl chloride (PVC) electrical insulating pressure-sensitive adhesive tape
- JB/T 6018-1992 Technical requirements for rotor assembly of split flow centrifugal oil filter
- GB/T 14836-1993 Qualitative analysis of ash content of vulcanized rubber
- QB/T 2667.2-2004 Multi-hole integrated plastic pipes for buried communications Part 2: Polyethylene (PE) multi-hole integrated pipes
- GB 4805-1994 Hygienic standard for epoxy phenolic coatings for the inner wall of food cans
- GB/Z 19036-2009 Quality management systems—Guidelines for the application of GB/T 19001 in small businesses
- CBM 2056-1982 Marine steel single leaf non-watertight door
- GB/T 3543.2-1995 Inspection procedures for crop seeds - Sampling
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：wymp4wang@gmail.com