JB/T 9041-1999 Adsorption tank

JB/T 9041-1999 JB/T 9041-1999 Adsorption tank JB/T9041-1999 Standard download decompression password: www.bzxz.net

ICS73.120
Machinery Industry Standard of the People's Republic of China
JB/T 9041—1999
Adsorber
Published on 1999-06-28
National Bureau of Machinery Industry
Implemented on 2000-01-01
JB/T9841—1999
The standard is revised for the adsorber of station B. During the revision, the original standard was edited and the main technical content was changed
This standard replaces 2BD960:4-This standard was proposed and issued by the National Technical Committee for Standardization of Mining Machinery. This standard was drafted by: Heavy Machinery:-. This standard was drafted by: Key points of the card standard: Mi Minxiang, San Shangmin, Fu Lici, Liu Jundao. Scope
Adsurber
JDT 9041—1999
Generation zD9604—9.1
This standard specifies the adsorption products, technical requirements, test methods, inspection rules, marking, packaging, transportation storage and applicable measures for gold ore dressing adsorption process. Reference standards
The following standards are cited in this standard and constitute the meaning of this standard through reference. When the standard is published, the version and effectiveness are shown. All standards are subject to revision and parties using this standard should discuss the possibility of using the latest edition of the following standards: GB
GB:T $21--J992
GET[68]
GB.T I6SS
GBT [33061991
JR.T 1604 i99R
HG/T219X—1991
3 Product classification
Vulcanized rubber thermoplastic rubber tensile stress-strain property determination rubber Noel A hardness test force method
Vulcanized rubber static elasticity determination
Vulcanized rubber grinding property determination (using Acker seat grinding machine) International brand
Mining machinery product model control method
Vulcanized mechanical physical test method 31 The attachment is flat-bottomed barrel type, center research, and the impeller is blade type 3.1.2 The position of the mine mouth must be paid so that the mine is discharged through the end exchange device. 3.3 Model
The model right shows that it meets the requirements of B/T164. XK-mouth
inner diameter, 3m
option
mark 3: The mold inner diameter is 2500mm, the cell height is 3150mm, the effective volume is 13m, you are wrong: marked as XF-2500 adsorption trap
3.3 The basic parameters and dimensions of the digital skin
should conform to the requirements of Table 1. Approved by Guohao Machinery Industry Bureau on 19499-06-28 and implemented on 2000-41-01
XF-280
XP-25()
XF-5150
XF-1M02
KF4SKP
XF·5U00F
Technical requirements
JB/F5841-1999
New in-body
4.! The adsorption plant shall meet the requirements of this standard and be manufactured according to the approved samples and technical parts. Kaiche
4.2 The adsorption tank shall be able to operate under the conditions of slurry concentration less than 45% (according to the test), -0.074mm grade content of 80%, and production volume less than +3.2k: 4.3 Transmission device
4.31 The transmission shall be stable, flexible and reliable, and the noise shall be less than (A) during the operation (now). 4.3.2 During normal operation, the bearing temperature rise shall be less than 40%. 4.3.3 Xucheng Department Specifications and Ball Speed ​​​​Robot Charge Test Delivery, Gradually 4:1 Mixer
4.4.! The physical properties of the film shall be determined by the combined properties of Table 2 and Table 3. The combined properties of the film shall be determined by the strength of the film and the relative humidity of the film. 4.4.2 The particle size of the activated carbon shall be less than 0.2% (by weight) 4.5 Isolation device 4.5.1 The pore size of the carbon separation device must be smaller than the particle size of the activated carbon used in the decarbonization process. 4.5.2 The carbon separation device shall have a mesh to ensure the slurry flow. 62
4.5.3 The screen is made of stainless steel
JE/9041-1999
4.5.4 In order to ensure the installation stability, the screen holes should be prevented from being misaligned. 4.6 All parts must be divided into grids, and purchased parts and external parts must have certificates of conformity for assembly. 4. The welding process must be uniform. No leakage is allowed 4.8 The surface of the exposed metal parts should be evenly coated without peeling, sparse marks and cracks. 4.9 The scope of supply includes: a) complete machine parts (including carbon insulation); b) motor, 5.1 The noise rate should be measured at the external part [m with a grade meter, 5.2 The bearing temperature rise should be measured at the idle running point with a semiconductor point thermometer, 5.3 The physical performance test specimen 1. The equipment and adhesion test should be in accordance with the provisions of GT2198: the machine strength should be measured according to the provisions of G[32; the reflection (Part A) should be measured according to the provisions of GB/53]: Strictly connected to GB /T[68] Determination according to the provisions of G1689
5.4 Before removing the paint, use a sample for inspection and do an oil penetration test: 6 Inspection rules
6.1 Inspection classification
It is divided into factory inspection and type inspection. 6.2 Factory inspection
6.2.1 The receiving parts shall be inspected and qualified by the inspection department of the manufacturer before leaving the factory. The same products shall be proved to be qualified before leaving the factory. 62.2 The factory inspection shall meet the requirements of 4.3.1, 4.3.2, 4.7 and 4.8. 4.3.1 Only the output of each year shall be measured. For every 0 units of each grid, at least one unit shall be sampled for clean water reduction. 6.3 Type inspection
6.3.1 In any of the following circumstances, the adsorption tank shall be subject to type inspection: a) When new products or old products are transferred to the factory for production for identification; b) When there are major changes in product structure, materials, and process; c) When the product is discontinued for a long time, the adsorption tank is out of production! The inspection result is the same as the last time: the national quality supervision agency puts forward type inspection requirements: 6.3.2 Type inspection requirements 7 Marking, packaging, transportation and viewing vehicle
7.1 Each product type and size should comply with the requirements (T, 306) and be clearly marked in the appropriate position, and the following contents should be indicated:
Manufacturer name, trademark:
b) Product name, model:
c Main technical teaching;
d Production number, date. Www.bzxZ.net
JB/T 9041—1999
7.2 The exposed surface of the parts should be greased with anti-rust grease and wrapped with oil paper or plastic cloth. 7.3 The packaging of the suction equipment should meet the requirements of transportation by law and waterway. The sieve body should be disassembled according to the trough body drawing. 4 The packaging plan should have obvious text markings, including: 2) Manufacturer name; b) Product name and model: e) Charging unit and address: year, number, size and transportation mark. 7.5 The collected parts should be stored in a room 3m away from the demand, heat source and other materials. 7.6 The following items are attached randomly: a) Product general drawing and installation drawing: d) Product description: 3) Printed product fan disk qualification certificate: 4) Packing list,
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.