GB/T 5633.1-1985 Expanded adjustable end tee pipe joint

GB/T 5633.1-1985 Expanded adjustable end tee pipe joint GB/T5633.1-1985 standard download decompression password: www.bzxz.net

National Standard of the People's Republic of China
Flared type tube fittiegs --Straight.thread branch tee-AssemblyThis standard applies to flared adjustable tee pipe fittings for use in piping systems with oil and gas as the medium. L
GB 6633.2 85
GB 5649-
GB5652-85
GH 5647—86
Marking example:
Flared adjustable end-end Lantong pipe joint with an outer diameter of 10 mm: Through joint 10GB5633.1—85
National Bureau of Standards 1985-11-28 IssuedWww.bzxZ.net
UDC 621.4$.4
GB 66$3.1B5
GB5646--85
148%-0要-01 Implementation
Outer diameter of pipe
M12 ×1.5
M18 ×1.5
M22 × 1. 5
M27 × 2
M33×2
M42×2
GB 56$$. 1—85
Technical conditions shall be in accordance with the provisions of GB5653—85 "Technical conditions for flared pipe joints". Additional remarks:
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Standardization Research Institute of the Ministry of Machinery Industry. S
Quality (steel)
kg/100 pieces
This standard was drafted by the Standardization Research Institute of the Ministry of Machinery Industry, Shanghai Hydraulic Accessories!, Changchun Automobile Research Institute, and Shanghai Hydraulic and Pneumatic Research Institute.
The main drafters of this standard are Hu Lusheng, Li Ningning, and Zhang Qianlong. From the date of implementation of this standard, the original ministry standard JB1909-77 "Flared end tee pipe joints" will be invalidated.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.