JB/T 9930.1-1999 Vertical Band Saw Parameters
time:
2024-08-12 04:55:41
- JB/T 9930.1-1999
- Abolished
Standard ID:
JB/T 9930.1-1999
Standard Name:
Vertical Band Saw Parameters
Chinese Name:
立式带锯床 参数
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01 -
Date of Expiration:
2002-12-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tools>>25.080.30 Broaching MachineChina Standard Classification Number:
Machinery>>Metal Cutting Machine Tools>>J57 Plug, Pull, Planer, Sawing Machine
alternative situation:
ZB J57001-87; replaced by JB/T 9930.1-2002
Description (Translated English) / downloadSkip to download
Summary:
JB/T 9930.1-1999 Vertical Band Saw Parameters JB/T9930.1-1999 Standard Download Decompression Password: www.bzxz.net
Standard contentSome standard content:
IC575.080.30
Machinery Industry Standard of the People's Republic of China
JB/T 9930.1-9930.4—1999
Vertical Band Saw
1999-05-20 Issued
National Bureau of Machinery Industry
2000-01-01 Implementation
JB/T9930.1—1999
This standard is revised on the basis of ZBJ5700187 "Parameters of Vertical Band Saw". This standard is consistent with the technical content of ZBJ5700187 and has reconfirmed the relevant specifications. This standard is part of the JB/T9930 "Vertical Band Saw" series of standards. This series of standards includes the following four parts: JB/F9930.1-1999 Vertical Band Saw Machine Parameters JB9930.2-1999 Vertical Band Saw Machine Series FB/T9930.3-1999 Vertical Band Saw Machine Accuracy Inspection JE9930.4-1999 Vertical Band Saw Machine Technical Planning This standard has replaced ZBJ5001-87 since its implementation. This standard was proposed by the National Technical Committee for Standardization of Slicing Machine Tools. This standard is the National Technical Committee for Standardization of Metal Slicing Machine Tools. The sponsor of this standard is Hunan Machine Tool. This standard was first issued in July 1987. This standard specifies the parameters of vertical band saw machines. Parameters
99301-1999
ZBJ57001-8
This standard applies to general-purpose vertical belt lathes with maximum lathe thickness of 125-.500mm. Z Parameters
The type of machine tool is shown in Figure 1 and Figure 2. The parameters of the machine tool are in accordance with the provisions of Table 1. Figure 1
Maximum cutting thickness
Ordinary type
Approved by the Machinery Industry Bureau on May 20, 19997
Figure 2 Large throat depth typebzxz.net
Implemented on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 9930.1-9930.4—1999
Vertical Band Saw
1999-05-20 Issued
National Bureau of Machinery Industry
2000-01-01 Implementation
JB/T9930.1—1999
This standard is revised on the basis of ZBJ5700187 "Parameters of Vertical Band Saw". This standard is consistent with the technical content of ZBJ5700187 and has reconfirmed the relevant specifications. This standard is part of the JB/T9930 "Vertical Band Saw" series of standards. This series of standards includes the following four parts: JB/F9930.1-1999 Vertical Band Saw Machine Parameters JB9930.2-1999 Vertical Band Saw Machine Series FB/T9930.3-1999 Vertical Band Saw Machine Accuracy Inspection JE9930.4-1999 Vertical Band Saw Machine Technical Planning This standard has replaced ZBJ5001-87 since its implementation. This standard was proposed by the National Technical Committee for Standardization of Slicing Machine Tools. This standard is the National Technical Committee for Standardization of Metal Slicing Machine Tools. The sponsor of this standard is Hunan Machine Tool. This standard was first issued in July 1987. This standard specifies the parameters of vertical band saw machines. Parameters
99301-1999
ZBJ57001-8
This standard applies to general-purpose vertical belt lathes with maximum lathe thickness of 125-.500mm. Z Parameters
The type of machine tool is shown in Figure 1 and Figure 2. The parameters of the machine tool are in accordance with the provisions of Table 1. Figure 1
Maximum cutting thickness
Ordinary type
Approved by the Machinery Industry Bureau on May 20, 19997
Figure 2 Large throat depth typebzxz.net
Implemented on January 1, 2000
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HGJ 223-1992 Technical specification for welding and brazing of copper and copper alloys
- QB/T 2352-1997 Single-sided writing paper
- SJ 20022-1992 Detail specification for tranmitting tube of Type FU251F
- QB/T 2294-1997 Paper cup
- GB/T 35636-2017 Specification for surveying and mapping of urban underground space
- GB 16895.6-2000 Electrical installations in buildings Part 5: Selection and installation of electrical equipment Chapter 52: Wiring systems
- JB/T 6361.5-1992 Technical requirements for ring groove nails and spiral groove nails
- QB/T 2623.4-2003 Test methods for soaps - Determination of moisture and volatile matter content in soaps - Oven method
- QB/T 1622.1-1992 Terminology of stainless steel utensils
- GB/T 15781-1995 Forest tending regulations
- GBZ 72-2002 Occupational acute latent chemical poisoning diagnosis rules
- GB/T 1.1-2020 Directives for standardization—Part 1:Rules for the structure and drafting of standardizing documents
- JB/T 50161-1999 Energy consumption classification of generator gas station
- JB/T 6665.1-1993 Light and small diesel engines - Pump direct-connected units types and basic parameters
- GBZ 27-2002 Diagnostic criteria for occupational solvent gasoline poisoning
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com