GB/T 3351-1982 Model designation of artificial quartz crystals
time:
2024-08-11 00:02:54
- GB/T 3351-1982
- in force
Standard ID:
GB/T 3351-1982
Standard Name:
Model designation of artificial quartz crystals
Chinese Name:
人造石英晶体的型号命名
Standard category:
National Standard (GB)
-
Date of Release:
1982-01-02 -
Date of Implementation:
1983-10-01
Standard ICS number:
Electronics >> 31.020 Electronic Components GeneralChina Standard Classification Number:
Electronic Components and Information Technology >> Electronic Components >> L18 Filters, Delay Lines
Release date:
1982-12-27Review date:
2004-10-14Drafting Organization:
Electronics FactoryFocal point Organization:
National Technical Committee for Standardization of Piezoelectric Devices for Frequency Control and SelectionPublishing Department:
Ministry of Information Industry (Electronics)Competent Authority:
Ministry of Information Industry (Electronics)
Skip to download
Summary:
This model name applies to all types of artificial quartz crystals. GB/T 3351-1982 Model name of artificial quartz crystals GB/T3351-1982 standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Designatlons for synthetic quartz crystalsbZxz.net
Designatlons for synthetie quartz crystalsThis model name applies to various types of synthetic quartz crystals. The model of synthetic quartz crystal can be composed of five parts. UDC 621.315.613
.3: 001.4
GB3351-82
The first part uses a capital Latin letter to indicate the type of water; the second part uses an Arabic numeral to indicate the orientation of the seed crystal, which is marked in the lower right corner of the first part; the third part uses a single Arabic letter to indicate the grade of Q value; the fourth part uses an Arabic numeral to indicate the type of inclusions, which is marked in the lower right corner of the third part; the fifth part uses two Arabic numerals to indicate the size of the seven directions, and a straight line segment separates the fifth and fourth parts. Example of artificial crystal model writing:
Additional instructions:
Dimension in the Z direction is 38mm
Type 1 inclusions
A-grade Q value
Seed crystal orientation is 0"
Y rod artificial crystal
Dimension in the Z direction is 50 mm
Type 2 inclusions
D-grade Q value
Seed crystal orientation is +5°
Y block artificial crystal
This standard was proposed by the Ministry of Electronics Industry of the People's Republic of China. This standard is under the jurisdiction of the Standardization Research Institute of the Ministry of Electronics Industry. This standard was drafted by Factory 707 of the Ministry of Electronics Industry. The main drafters of this standard are Jing Hezhen and Xie Xianzhen. It was issued by the National Bureau of Standards on December 27, 1982
Implemented on October 1, 1983
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Designatlons for synthetic quartz crystalsbZxz.net
Designatlons for synthetie quartz crystalsThis model name applies to various types of synthetic quartz crystals. The model of synthetic quartz crystal can be composed of five parts. UDC 621.315.613
.3: 001.4
GB3351-82
The first part uses a capital Latin letter to indicate the type of water; the second part uses an Arabic numeral to indicate the orientation of the seed crystal, which is marked in the lower right corner of the first part; the third part uses a single Arabic letter to indicate the grade of Q value; the fourth part uses an Arabic numeral to indicate the type of inclusions, which is marked in the lower right corner of the third part; the fifth part uses two Arabic numerals to indicate the size of the seven directions, and a straight line segment separates the fifth and fourth parts. Example of artificial crystal model writing:
Additional instructions:
Dimension in the Z direction is 38mm
Type 1 inclusions
A-grade Q value
Seed crystal orientation is 0"
Y rod artificial crystal
Dimension in the Z direction is 50 mm
Type 2 inclusions
D-grade Q value
Seed crystal orientation is +5°
Y block artificial crystal
This standard was proposed by the Ministry of Electronics Industry of the People's Republic of China. This standard is under the jurisdiction of the Standardization Research Institute of the Ministry of Electronics Industry. This standard was drafted by Factory 707 of the Ministry of Electronics Industry. The main drafters of this standard are Jing Hezhen and Xie Xianzhen. It was issued by the National Bureau of Standards on December 27, 1982
Implemented on October 1, 1983
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 6977-1993 Technical conditions for rust prevention pretreatment of mechanical products
- GB/T 4507-1999 Determination of asphalt softening point (ring and ball method)
- GB/T 15560-1995 Hydraulic instantaneous burst and pressure resistance test methods for plastic pipes for fluid transportation
- GB/T 18131-2000 STANDARD shipping marks for international trade
- GB/T 14999.1-1994 Longitudinal macrostructure acid immersion test method for high temperature alloy bars
- SN/T 1828.7-2013 Test method of classification for import and export dangerous foods-Part 7:Compressed gases
- GB/T 5009.1-2003 General principles for physical and chemical parts of food hygiene inspection methods
- GB/T 14822-1993 Guidelines for the design of safety protection structures for hand-held power tools
- GB/T 16267-1996 Test of packaging materials-Vapors corrosion inhibiting ability
- GB 16916.1-1997 Residual current circuit breakers (RCCB) without overcurrent protection for household and similar purposes Part 1: General rules
- JB/T 6307.2-1992 Test methods for power semiconductor modules Rectifier single-phase bridge
- GB 16852.1-1997 Diagnosis of occupational acute chemical poisoning Part 1: General principles for diagnosis of occupational acute chemical poisoning
- GB 4706.46-1999 Safety of household and similar electrical appliances Particular requirements for milking machines
- GB/T 15337-1994 General rules for atomic absorption spectrometry
- GB/T 27404-2008 Criterion on quality control of laboratories - Chemical testing of food
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com