GB 12523-1990 Noise limits at construction site boundaries
time:
1990-11-09 16:00:00
- GB 12523-1990
- in force
Standard ID:
GB 12523-1990
Standard Name:
Noise limits at construction site boundaries
Chinese Name:
建筑施工场界噪声限值
Standard category:
National Standard (GB)
-
Date of Release:
1990-11-09 -
Date of Implementation:
1991-03-01
Standard ICS number:
17.140.40China Standard Classification Number:
Environmental Protection >> Pollutant Emission Standards >> Z67 Physical Pollution Control Standards
Release date:
1990-11-09Review date:
2004-10-14Drafter:
Ren Wentang, He Qingci, Meng Juan, Li Xu, You PengjuDrafting Organization:
National Environmental Protection AgencyFocal point Organization:
State Environmental Protection AdministrationProposing Organization:
National Environmental Protection AgencyPublishing Department:
National Environmental Protection AgencyCompetent Authority:
State Environmental Protection Administration
Skip to download
Summary:
This standard applies to noise generated at construction sites during urban building construction. GB 12523-1990 Noise limits at construction site boundaries GB12523-1990 Standard download and decompression password: www.bzxz.net
Some standard content:
National standards of the People's Republic of China
Noise limits for construction siteGB12523—90
In order to implement the "Environmental Protection Law of the People's Republic of China" and the "Environmental Protection Law of the People's Republic of China" Noise Pollution Prevention and Control Regulations. This standard is specially formulated to control urban environmental noise pollution.
1 Scope of application
This standard applies to the noise generated at the construction site during urban building construction. 2Standard value
2.1 The operating noise limits at different construction stages are listed in the table below. Equivalent sound level [dB(A)]
Construction stage
Earthwork
Thresholding
Structure
Decoration
Main noise sources
Bulldozers, excavators, loaders, etc.
Various sill machines, etc.
Concrete Mixers, vibrating rods, electric saws and other cranes, lifts, etc.
betweenwww.bzxz.net
2.2| |tt||The noise values ??listed in the table refer to the limit values ??at the boundary line of the construction site corresponding to the sensitive area. 2.3
If several construction stages are carried out at the same time, the limit value for the high-noise stage is allow. Monitoring method
Noise limit
Prohibited
55|| tt||The equivalent sound level measurement at the boundary line of the construction site in this standard should be carried out in accordance with GB12524 "Measurement Method of Noise at the Boundary of Construction Sites".
Additional notes:
This standard is proposed by the National Environmental Protection Administration. The main drafters of this standard are Ren Wentang, He Qingci, Meng Xu, Li, and You Pengju. This standard is interpreted by the State Environmental Protection Administration. Approved by the State Environmental Protection Administration on November 9, 1990 and implemented on March 01, 1991
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Noise limits for construction siteGB12523—90
In order to implement the "Environmental Protection Law of the People's Republic of China" and the "Environmental Protection Law of the People's Republic of China" Noise Pollution Prevention and Control Regulations. This standard is specially formulated to control urban environmental noise pollution.
1 Scope of application
This standard applies to the noise generated at the construction site during urban building construction. 2Standard value
2.1 The operating noise limits at different construction stages are listed in the table below. Equivalent sound level [dB(A)]
Construction stage
Earthwork
Thresholding
Structure
Decoration
Main noise sources
Bulldozers, excavators, loaders, etc.
Various sill machines, etc.
Concrete Mixers, vibrating rods, electric saws and other cranes, lifts, etc.
betweenwww.bzxz.net
2.2| |tt||The noise values ??listed in the table refer to the limit values ??at the boundary line of the construction site corresponding to the sensitive area. 2.3
If several construction stages are carried out at the same time, the limit value for the high-noise stage is allow. Monitoring method
Noise limit
Prohibited
55|| tt||The equivalent sound level measurement at the boundary line of the construction site in this standard should be carried out in accordance with GB12524 "Measurement Method of Noise at the Boundary of Construction Sites".
Additional notes:
This standard is proposed by the National Environmental Protection Administration. The main drafters of this standard are Ren Wentang, He Qingci, Meng Xu, Li, and You Pengju. This standard is interpreted by the State Environmental Protection Administration. Approved by the State Environmental Protection Administration on November 9, 1990 and implemented on March 01, 1991
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- CJJ 71-2000 Engineering Technical Specifications for Motor Vehicle Washing Stations
- GB 5237.6-2004 Aluminium alloy building profiles Part 6: Thermal insulation profiles
- GB/T 15094-1994 Ship technology terminology Ship repair technology
- GB/T 9851.1-2008 Terminology of graphic technology - Part 1: Fundamental terms
- JB/T 9946-1999 Accuracy of rocker-arm woodworking circular saws
- GB/T 22275.3-2008 Requirements of conduct for good laboratory practice - Part 3: Compliance of laboratory suppliers with GLP principles
- GB 18164-2000 General technical requirements for Ferris wheel type amusement rides
- GB/T 4549.10-2004 Vocabulary of railway vehicles Part 10: Passenger car accessories
- SY/T 5236-2000 Sucker rod hook
- QB/T 2212.4-1996 Construction tools (masonry tools) Rectangular flat trowel
- GB/T 13744-1992 The measurement of coating thickness for electrodeposited nickel coatings on magnetic and non-magnetic substracts
- GB 17149.3-1997 Diagnostic criteria and treatment principles for cosmetic acne
- SY/T 0010-1996 Design specification for gas field gas gathering engineering
- JB/T 9918.1-1999 High-precision hob grinder accuracy inspection
- QB 1388-1991 Canned Applesauce
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com