JB/T 8006.2-1999 Hexagonal head clamping screws for machine tool fixture parts and components
time:
1999-08-06 15:00:00
- JB/T 8006.2-1999
- in force
Standard ID:
JB/T 8006.2-1999
Standard Name:
Hexagonal head clamping screws for machine tool fixture parts and components
Chinese Name:
机床夹具零件及部件 六角头压紧螺钉
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-08-06 -
Date of Implementation:
2000-01-01
Standard ICS number:
General, Terminology, Standardization, Documentation>>Vocabulary>>01.040.29 Electrical Engineering (Vocabulary)China Standard Classification Number:
Machinery>>Process Equipment>>J44 General Fixture
alternative situation:
JB/T 8006.2-1995 (original standard number GB/T 2161-1991)
Description (Translated English) / downloadSkip to download
Summary:
JB/T 8006.2-1999 JB/T 8006.2-1999 Hexagonal head clamping screws for machine tool fixture parts and components JB/T8006.2-1999 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
ICS 25. 080. 01
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implemented on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixturesHexagon-headed holddown screws serewThis standard specifies hexagonal head compression screws with thread specifications of M8~M36. 2 Reference standardsbzxz.net
JB/T8006.2—1999
Replace JB/T8006.2—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T6991988: Technical conditions for high-quality carbon structural steel JB/T8044—1999 Technical requirements for machine tool fixture parts and components 3 Dimensions
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 1999 Type C
Implemented on January 1, 2000
Basic dimensions
Limit deviations
JB/T 8006.21999
4 Technical conditions
4.1 Material: 45 steel in accordance with the provisions of GB/T699. 4.2 Heat treatment: 35~40HRC.
4.3 Other technical conditions in accordance with the provisions of JB/T8044. 5 Marking
5.1 Marking example:
JB/T8006.2—1999
Type A hexagonal compression screw with d=M16, L=60mm: screw AM16×60JB/T8006.2—199931
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06 Issued
State Machinery Industry Bureau
Implemented on 2000-01-01
Standard of the Machinery Industry of the People's Republic of China
The parts and units of jigs and fixturesHexagon-headed holddown screws serewThis standard specifies hexagonal head compression screws with thread specifications of M8~M36. 2 Reference standardsbzxz.net
JB/T8006.2—1999
Replace JB/T8006.2—1995
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T6991988: Technical conditions for high-quality carbon structural steel JB/T8044—1999 Technical requirements for machine tool fixture parts and components 3 Dimensions
The dimensions are shown in the following figure and table.
Approved by the State Machinery Industry Bureau on August 6, 1999 Type C
Implemented on January 1, 2000
Basic dimensions
Limit deviations
JB/T 8006.21999
4 Technical conditions
4.1 Material: 45 steel in accordance with the provisions of GB/T699. 4.2 Heat treatment: 35~40HRC.
4.3 Other technical conditions in accordance with the provisions of JB/T8044. 5 Marking
5.1 Marking example:
JB/T8006.2—1999
Type A hexagonal compression screw with d=M16, L=60mm: screw AM16×60JB/T8006.2—199931
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 2718-2003 Sauce Hygiene Standard
- GB 18098-2000 Determination of toxic gas content after explosion of industrial explosives
- CB 975-1981 Metal plugging pad
- GB 4404.2-1996 Grain Crop Seeds and Legumes
- GB/T 15371-1994 Measurement and evaluation method of crankshaft torsional vibration
- GB 16915.4-2003 Switches for household and similar fixed electrical installations Part 2: Particular requirements Section 3: Time-delay switches
- HG 21590-1995 Reflection glass plate liquid level gauge (PN4.0)
- GB/T 2705-2003 Classification and naming of coating products
- GB/T 17943-2000 Specifications for the geodetic astronomy
- GB/Z 19257-2003 Data transmission and interchange in supply chain
- QB/T 2467-1999 Stainless steel pipes for food industry
- JB/T 6015-2000 Technical conditions for diesel engine low-pressure oil delivery hose assembly
- JB/T 6642-1993 Measurement and evaluation method of roundness error of rolling bearing parts
- SJ/T 10587.4-1994 Technical data of Type DM-346 electronic glass
- SY 5509-1992 POI-2420 Crude Oil Demulsifier
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com