HG/T 2129.25-1991 Two-way equal-diameter pipe joints for chemical equipment parts made of acid-resistant phenolic plastics
time:
2024-08-13 11:11:50
- HG/T 2129.25-1991
- in force
Standard ID:
HG/T 2129.25-1991
Standard Name:
Two-way equal-diameter pipe joints for chemical equipment parts made of acid-resistant phenolic plastics
Chinese Name:
耐酸酚醛塑料制化工设备零部件 双向等径管接头
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1991-08-19 -
Date of Implementation:
1992-01-01
Standard ICS number:
Chemical Technology>>Chemical Equipment>>71.120.99 Other Chemical EquipmentChina Standard Classification Number:
Chemical Industry>>Chemical Machinery and Equipment>>G91 Chemical Machinery and Equipment Parts
alternative situation:
Replaced by HG/T 2129-2009
Description (Translated English) / downloadSkip to download
Summary:
HG/T 2129.25-1991 Bidirectional equal-diameter pipe joints for chemical equipment parts made of acid-resistant phenolic plastics HG/T2129.25-1991 Standard download decompression password: www.bzxz.net
Standard contentSome standard content:
Scope of application
Chemical Industry Standard of the People's Republic of China
Two-way equal-diameter pipe joints for chemical equipment parts made of acid-resistant phenolic plastic
HG/T2129.25-91
This standard applies to two-way equal-diameter pipe joints made of acid-resistant phenolic plastic with an allowable temperature of -30℃~130 and an allowable pressure as specified in the table below.
2 Reference standardsbzxz.net
HG/T2128 Technical conditions for chemical equipment, pipes and fittings made of acid-resistant phenolic plastics 3 Types and basic dimensions
Types and basic dimensions are as specified in the following figures and tables, mm
Nominal diameter
Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991tFs
Allowable pressure at room temperature
MPa(kgf/cm2)
Implemented on January 1, 1992
HG/T2129.25-91
Quality of raw materials and products Quality inspection, packaging, storage and transportation of raw materials and finished products should comply with the provisions of HG/T2128. Marking example
Bidirectional equal-diameter pipe joints made of acid-resistant phenolic plastic with a nominal diameter of DN=20mm are marked as DN20HG/T2129.25--91
Pipe joints
Additional instructions:
This standard was proposed by China National Chemical Equipment Corporation, and this standard is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by Chengdu Chemical Research and Design Institute, and the main drafters of this standard are He Jiabing and He Jin. 54
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Chemical Industry Standard of the People's Republic of China
Two-way equal-diameter pipe joints for chemical equipment parts made of acid-resistant phenolic plastic
HG/T2129.25-91
This standard applies to two-way equal-diameter pipe joints made of acid-resistant phenolic plastic with an allowable temperature of -30℃~130 and an allowable pressure as specified in the table below.
2 Reference standardsbzxz.net
HG/T2128 Technical conditions for chemical equipment, pipes and fittings made of acid-resistant phenolic plastics 3 Types and basic dimensions
Types and basic dimensions are as specified in the following figures and tables, mm
Nominal diameter
Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991tFs
Allowable pressure at room temperature
MPa(kgf/cm2)
Implemented on January 1, 1992
HG/T2129.25-91
Quality of raw materials and products Quality inspection, packaging, storage and transportation of raw materials and finished products should comply with the provisions of HG/T2128. Marking example
Bidirectional equal-diameter pipe joints made of acid-resistant phenolic plastic with a nominal diameter of DN=20mm are marked as DN20HG/T2129.25--91
Pipe joints
Additional instructions:
This standard was proposed by China National Chemical Equipment Corporation, and this standard is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by Chengdu Chemical Research and Design Institute, and the main drafters of this standard are He Jiabing and He Jin. 54
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG/T 2529-1993 Fluorescence logging sheet
- GB 8139-1987 Dewaxed shellac sheets, decolorized shellac sheets and decolorized dewaxed shellac sheets
- QB/T 2617-2003 Terpineol
- GB/T 15555.12-1995 Determination of corrosiveness of solid wastes - Glass electrode method
- JB/T 10329.2-2002 Electric fusion external machining machine tools Part 2:
- JB/T 6370-1992 Test methods for physical and mechanical properties of flexible graphite packing rings
- GB/T 28594-2021 Weather nowcasting
- JB/T 2766-1992 PN16.0～32.0MPa Forged high pressure valve structure length
- GB 19154-2003 Window cleaning machine
- SY/T 5586-1993 Specification for contracts for the import of complete sets of equipment for the petroleum industry
- CJJ 71-2000 Engineering Technical Specifications for Motor Vehicle Washing Stations
- HG/T 21615-1997 Modified polypropylene chamber and plate and frame filter press series
- JB/T 8357.1-1996 CNC vertical drilling machine accuracy
- JB/T 5076-1991 Gear device noise evaluation
- GB/T 22275.1-2008 Requirements of conduct for good laboratory practice - Part 1：Quality assurance and GLP
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]