GB 16207-1996 Hygienic standard for marble dust in workshop air
time:
2024-08-06 06:42:41
- GB 16207-1996
- in force
Standard ID:
GB 16207-1996
Standard Name:
Hygienic standard for marble dust in workshop air
Chinese Name:
车间空气中大理石粉尘卫生标准
Standard category:
National Standard (GB)
-
Date of Release:
1996-04-03 -
Date of Implementation:
1996-09-01
Standard ICS number:
Environmental protection, health and safety>>Air quality>>13.040.30 Air quality in the workplaceChina Standard Classification Number:
Medicine, Health, Labor Protection>>Health>>C52 Labor Hygiene
Release date:
1996-04-03Review date:
2004-10-14Drafting Organization:
Shandong Provincial Institute of Labor Health and Occupational Disease Prevention and ControlFocal point Organization:
Ministry of HealthPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Ministry of Health
Skip to download
Summary:
This standard specifies the maximum permissible concentration of marble dust in workshop air and its monitoring and inspection methods. This standard applies to factories, mines and users that generate marble dust during production. GB 16207-1996 Hygienic standard for marble dust in workshop air GB16207-1996 Standard download decompression password: www.bzxz.net
Some standard content:
National Standard of the People's Republic of China
Health standard for marble dust in the air of workplace1 Subject content and scope of application
This standard specifies the maximum permissible concentration of marble dust in the air of workplace and its monitoring and inspection methods. This standard is applicable to factories, mines and users that generate marble dust during production. 2 Reference standards
3 Dust determination method in workplace air
GB5748
3 Hygiene requirements
The maximum permissible concentration of marble dust in workplace air is 10mg/m3. 4 Monitoring and inspection methods
GB16207—1996
The determination of marble dust concentration and free silicon dioxide content in workplace air shall be carried out in accordance with GB5748. 5 Supervision and implementationbzxZ.net
Health supervision agencies at all levels are responsible for the implementation of this standard. Additional notes:
This standard is proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by Shandong Provincial Institute of Labor Hygiene and Occupational Disease Prevention and Control and Anhui Provincial Institute of Occupational Disease Prevention and Control. The main drafters of this standard are Wang Faji and Shi Rongshan. This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases of the Chinese Academy of Preventive Medicine, the technical unit entrusted by the Ministry of Health. Approved by the State Technical Supervision Week on April 3, 1996, and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Health standard for marble dust in the air of workplace1 Subject content and scope of application
This standard specifies the maximum permissible concentration of marble dust in the air of workplace and its monitoring and inspection methods. This standard is applicable to factories, mines and users that generate marble dust during production. 2 Reference standards
3 Dust determination method in workplace air
GB5748
3 Hygiene requirements
The maximum permissible concentration of marble dust in workplace air is 10mg/m3. 4 Monitoring and inspection methods
GB16207—1996
The determination of marble dust concentration and free silicon dioxide content in workplace air shall be carried out in accordance with GB5748. 5 Supervision and implementationbzxZ.net
Health supervision agencies at all levels are responsible for the implementation of this standard. Additional notes:
This standard is proposed by the Ministry of Health of the People's Republic of China. This standard was drafted by Shandong Provincial Institute of Labor Hygiene and Occupational Disease Prevention and Control and Anhui Provincial Institute of Occupational Disease Prevention and Control. The main drafters of this standard are Wang Faji and Shi Rongshan. This standard is interpreted by the Institute of Labor Hygiene and Occupational Diseases of the Chinese Academy of Preventive Medicine, the technical unit entrusted by the Ministry of Health. Approved by the State Technical Supervision Week on April 3, 1996, and implemented on September 1, 1996
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JJF 1096-2002 Calibration Specification for Calibrator of Extensometers
- JB/T 6893-1993 Technical requirements for reciprocating piston medium pressure oxygen compressors
- GB/T 4074.1-1999 Winding wire test methods Part 1: General provisions
- GB/T 4589.1-1989 General specification for discrete semiconductor devices and integrated circuits (for certification purposes)
- GB/T 19251-2003 Guideline of Numbering and symbol marking of trade items
- GB/T 3181-1995 Paint film color standard
- JB/T 6620-1993 Test method for flexible graphite braided packing
- GB 50203-2002 Code for acceptance of construction quality of masonry works
- JB/T 9929-1999 Static rigidity of lifting table milling machine
- GB/T 14808-2001 AC high voltage contactors and contactor-based motor starters
- NY/T 1156.4-2006 Pesticides guidelines for laboratory bioactivity tests Part 4: Potted plant test for fungicide control of powdery mildew on wheat
- GB/T 4994-1998 Iron-copper-nickel (constantan) thermocouple wire
- GA/T 465.3-2004 Specification of basic operation functions for public order administration information system -- Part 3: Basic operation functions of tenement
- JB/T 10232.2-2001 Threading tool sets Part 2: Technology
- YY/T 0457.6-2003 Characteristics of optoelectronic X-ray image intensifiers for medical electrical equipment Part 6: Determination of contrast and glare coefficient
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com