HG/T 2129.5-1991 Flat covers for chemical equipment parts made of acid-resistant phenolic plastics
time:
2024-08-13 11:24:53
- HG/T 2129.5-1991
- in force
Standard ID:
HG/T 2129.5-1991
Standard Name:
Flat covers for chemical equipment parts made of acid-resistant phenolic plastics
Chinese Name:
耐酸酚醛塑料制化工设备零部件 平盖
Standard category:
Chemical industry standards (HG)
-
Date of Release:
1991-08-19 -
Date of Implementation:
1992-01-01
Standard ICS number:
Chemical Technology>>Chemical Equipment>>71.120.99 Other Chemical EquipmentChina Standard Classification Number:
Chemical Industry>>Chemical Machinery and Equipment>>G91 Chemical Machinery and Equipment Parts
alternative situation:
Replaced by HG/T 2129-2009
Skip to download
Summary:
HG/T 2129.5-1991 Acid-resistant phenolic plastics for chemical equipment parts flat covers HG/T2129.5-1991 Standard download decompression password: www.bzxz.net
Some standard content:
Scope of application
Chemical Industry Standard of the People's Republic of China
Flat cover of chemical equipment parts made of acid-resistant phenolic plastic
HG/T2129.5-91
This standard applies to the production cover of acid-resistant phenolic plastic towers and containers with an allowable temperature of -30℃~130C and an allowable pressure of normal pressure.
Referenced Standard
HG/T2128 Technical conditions for chemical equipment, pipes and pipe fittings made of acid-resistant phenolic plastic Type and basic dimensions
Type and basic dimensions are as specified in the following figure and table DN
Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991 and implemented on January 1, 1992
Nominal diameterwwW.bzxz.Net
(1100)
①Nominal diameters with active numbers in the table should be used as little as possible. ②The mass is calculated based on the density of -1.8kg/m3.
HG/T2129.591
4 Quality inspection, packaging, storage and transportation of raw materials and products 10
The quality inspection, packaging, storage and transportation of raw materials and products shall comply with the provisions of HG/T2I28. 5 Marking example
The flat cover made of acid-resistant phenolic plastic with a nominal diameter of DN=500mm is marked as: flat cover
Additional instructions:
This standard is proposed by China National Chemical Equipment Corporation HG/T2129.5-91
This standard is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by the Chemical Research and Design Institute of the War Department at its own expense. The main drafters of this standard are He Jiabing and He Jin. 10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Chemical Industry Standard of the People's Republic of China
Flat cover of chemical equipment parts made of acid-resistant phenolic plastic
HG/T2129.5-91
This standard applies to the production cover of acid-resistant phenolic plastic towers and containers with an allowable temperature of -30℃~130C and an allowable pressure of normal pressure.
Referenced Standard
HG/T2128 Technical conditions for chemical equipment, pipes and pipe fittings made of acid-resistant phenolic plastic Type and basic dimensions
Type and basic dimensions are as specified in the following figure and table DN
Approved by the Ministry of Chemical Industry of the People's Republic of China on August 19, 1991 and implemented on January 1, 1992
Nominal diameterwwW.bzxz.Net
(1100)
①Nominal diameters with active numbers in the table should be used as little as possible. ②The mass is calculated based on the density of -1.8kg/m3.
HG/T2129.591
4 Quality inspection, packaging, storage and transportation of raw materials and products 10
The quality inspection, packaging, storage and transportation of raw materials and products shall comply with the provisions of HG/T2I28. 5 Marking example
The flat cover made of acid-resistant phenolic plastic with a nominal diameter of DN=500mm is marked as: flat cover
Additional instructions:
This standard is proposed by China National Chemical Equipment Corporation HG/T2129.5-91
This standard is under the jurisdiction of the National Technical Committee for Standardization of Non-metallic Chemical Equipment. This standard was drafted by the Chemical Research and Design Institute of the War Department at its own expense. The main drafters of this standard are He Jiabing and He Jin. 10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB 3280-1992 Stainless steel cold rolled steel sheet
- JB/T 9054-2000 Centrifugal dust collector
- HG/T 20517-1992 Steel low pressure wet gas holder
- MT 933-2005 Specifications for sports car protective devices
- GB 3121-1982 Nickel and nickel alloy wire for vacuum devices
- YY/T 0468-2003 Specification for the naming system of medical devices used for management of information exchange
- JB/T 10213-2000 Technical requirements for inspection of welding quality of ventilators
- GB/T 15047-1994 Test method for torsional rigidity of plastics
- HG/T 2818-1996 Light conveyor belt
- GB/T 8549-1987 Fe-Cr-B-Si self-fluxing alloy powder
- JB/T 10275-2001 General technical requirements for AC spindle drive units for CNC machine tools
- HG 2262-1992 Technical Specifications for Single-stage Cantilever Double-acting Liquid Ring Chlorine Pumps
- JB/T 8334.1-1996 CNC turret tool holder vertical
- JB/T 6382.1-1992 Cone seal welded 90° elbow joint
- HG/T 2120-1991 Specification for single tube parallel flow internals of ammonia synthesis tower
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com