GB/T 9211-1988 Carbide curved pointed rotary files
time:
2024-08-09 23:55:47
- GB/T 9211-1988
- Abolished
Standard ID:
GB/T 9211-1988
Standard Name:
Carbide curved pointed rotary files
Chinese Name:
硬质合金弧形尖头旋转锉
Standard category:
National Standard (GB)
-
Date of Release:
1988-05-12 -
Date of Implementation:
1989-01-01 -
Date of Expiration:
2005-12-01
Standard ICS number:
Mechanical Manufacturing>>Cutting Tools>>25.100.60 FilesChina Standard Classification Number:
Machinery>>Technology Equipment>>J41 Tool
alternative situation:
Replaced by GB/T 9217.7-2005Procurement status:
≈ISO 7755/2-84
Description (Translated English) / downloadSkip to download
Summary:
GB/T 9211-1988 Carbide curved pointed rotary file GB/T9211-1988 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
中华人民共和国国家标准
硬质合金弧形尖头旋转锉
Areh pointed-nose hardmetal burrsCB 9211--88wwW.bzxz.Net
本标准参照采用国际标准[SO7755/7—1984《硬质合金旋转锉-一第7部分：弧形尖头旋转链（C型)》。
型式和尺寸
1.1型式和尺寸按下图和表。
旋转锉代号
G0313C03
G0618C0640
G1020C0640
G1225C0640
中國齿國
G0313M03
G0618M0640
G1020M0640
G1225M0640
G0313F03
G0618F0640
G1020F0640
G1225F0640
注：1>这一切削长度可包括一段圆柱部分。1.2标记示例
（±0.5)
硬质合金弧形尖头旋转锉（G型）d=10mm，=20mmd,=6mm，柄部长度为40mm，细齿（F）。标记为：G1020F0640GB9211-88
国家机械工业委员会1988-05-12批准1989-07-01实施
技术条件
GB9211—88
技术条件》的规定。
按GB9217—88《硬质合金旋转锉附加说明：
本标准由全国刀具标准化技术委员会提出本标准由全国刀具标准化技术委员会归口。本标准由成都工具研究所、上海工具厂起草。148
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
硬质合金弧形尖头旋转锉
Areh pointed-nose hardmetal burrsCB 9211--88wwW.bzxz.Net
本标准参照采用国际标准[SO7755/7—1984《硬质合金旋转锉-一第7部分：弧形尖头旋转链（C型)》。
型式和尺寸
1.1型式和尺寸按下图和表。
旋转锉代号
G0313C03
G0618C0640
G1020C0640
G1225C0640
中國齿國
G0313M03
G0618M0640
G1020M0640
G1225M0640
G0313F03
G0618F0640
G1020F0640
G1225F0640
注：1>这一切削长度可包括一段圆柱部分。1.2标记示例
（±0.5)
硬质合金弧形尖头旋转锉（G型）d=10mm，=20mmd,=6mm，柄部长度为40mm，细齿（F）。标记为：G1020F0640GB9211-88
国家机械工业委员会1988-05-12批准1989-07-01实施
技术条件
GB9211—88
技术条件》的规定。
按GB9217—88《硬质合金旋转锉附加说明：
本标准由全国刀具标准化技术委员会提出本标准由全国刀具标准化技术委员会归口。本标准由成都工具研究所、上海工具厂起草。148
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JGJ 89-1992 Technical Standard for Sampling of Undisturbed Soil
- GB/T 50228-1996 Basic terminology standard for engineering measurement
- GB 16852.2-1997 Diagnosis of occupational acute chemical poisoning Part 2: Diagnostic rules for occupational acute latent chemical poisoning
- JB/T 3711.2-1999 Graphic symbols for centralized lubrication systems
- SY/T 10015-1998 Technical specification for offshore towed 2D seismic data acquisition
- GB/T 19434.3-2004 Safety specification for inspection of wooden intermediate bulk containers for dangerous goods Performance inspection
- CB 1010-1990 External thread stainless steel stop valve
- GB/T 3720-1988 Basic parameters of optical length measuring instruments
- SJ 1284-1977 Methods for evaluation of corrosion test results for metallic coatings and chemically treated layers
- JB/T 7766-1995 Types and basic parameters of finger wheel rakes
- GB 18551-2001 Occupational exposure limits for acetone cyanohydrin in workplace air
- GB/T 3688-1998 Test method for adhesion strength of V-belt cords
- GB/T 5095.6-1997 Basic test procedures and measurement methods for electromechanical components for electronic equipment Part 6: Climate test and soldering test
- JB/T 6291.1-1992 Technical requirements for piston oil pump assemblies
- SY/T 0556-1999 Quick-release switch blind plate
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com