JB/T 3411.116-1999 Dimensions of end milling cutter bars with Morse taper shanks and longitudinal keys

JB/T 3411.116-1999 This standard is a revision of JB 3527-83 "Dimensions of End Milling Cutter Arbors with Morse Taper Shanks and Longitudinal Keys". Only the following points have been modified during the revision, and the main technical content has not changed: - Writing format; - Standard name plus English; - Relevant reference standards and related content; - Thread drawing method. This standard specifies the type and size of end milling cutter arbors with Morse taper shanks and longitudinal keys. JB/T 3411.116-1999 Dimensions of End Milling Cutter Arbors with Morse Taper Shanks and Longitudinal Keys JB/T3411.116-1999 Standard download decompression password: www.bzxz.net

ICS25.080.01
Mechanical Industry Standard of the People's Republic of China
JB/T3411.116-1999
End milling arbor with moseta per shank and with longitudinal key DimensionsPublished on 1999-05-20
State Bureau of Machinery Industry
Implementation on 2000-01-01
Mechanical Industry Standard of the People's Republic of China
End milling arbor with moseta per shank and with longitudinal key DimensionsThis standard specifies the types and dimensions of end milling arbor with moseta per shank and with longitudinal key. 2 Reference standards
JB/T3411.116-1999
Replace JB352783www.bzxz.net
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised. Parties using this standard should explore the possibility of using the latest versions of the following standards GB/T4133-1984 Types and sizes of forced transmission of Morse cones 3 Types and sizes
Types and sizes are as specified in the following figures and tables. Zhenshi Garden
Approved by the State Machinery Industry Bureau on May 20, 1999, implemented on January 1, 2000
Morse taper number
Basic size
Limit deviation
JB/T3411.116-1999
Note: The size and deviation of Morse taper shall be marked in accordance with the provisions of GB/T41334
Marking example:
Morse taper number 4, d-22mm, 1-37mm Morse taper shank with longitudinal key end milling cutter bar: cutter bar
4-22×37
JB/T3411.116—1999
Mechanical industry standard
Morse taper shank with longitudinal key end milling cutter bar
JB/T 3411.116—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Format 880×1230
X Number of characters xXX,XXX
Print sheets X/X
Xth printing in XX month, 19XX
Xth edition in XX month, 19XX
Number of copies 1-XXX
Price XXXXX Yuan
XX-XXX
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.