QB/T 2212.1-1996 Terminology of construction tools (bricks and tiles)

This standard specifies the classification and naming of construction tools (brick and tile tools), and specifies the scope of use. It is applicable to and compiles product standards of various levels of brick and tile tools in my country. The figures in this standard are only for schematic diagrams and do not restrict the design of products by manufacturers. QB/T 2212.1-1996 Construction Tools (Brick and Tile Tools) Terminology QB/T2212.1-1996 Standard download decompression password: www.bzxz.net

QB/T2212.1—-1996
This standard is revised on the basis of the former professional standards of the Ministry of Light Industry ZBJ47001--1985 "Terms of Construction (Masonry) Tools", ZBJ47002--1985 "General Technical Conditions of Construction (Masonry) Tools", and ZBJ47003--1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools", and converted into light industry standards. In the overall structure of the standard, the terminology, general technical conditions and product standards of construction tools are retained, and the original ZBI47003--1985 "Inspection Rules, Marking, Packaging and Transportation of Construction (Masonry) Tools" are cancelled, and some of its relevant provisions are merged into the general technical conditions. Product standards are retained according to the numbers in the terms. A "diamond shovel" product standard is added. This standard changes the word "bricks" in the brackets of the original name to "bricks" and puts it behind the standard name "construction tools" to make the hand tools used in construction operations more standardized and make clear limitations in the scope of application. This standard is a supporting standard. The terms and general technical conditions are based on the original standard, and the technical content that has been proven to be suitable for my country's situation in practice is retained. The main dimensions in the product standard have been optimized, several specifications have been added, and the extreme deviations have been noted. This standard has modified and improved some quality indicators.
From the date of implementation of this standard, ZBJ47001~47003-1985 will be abolished at the same time. This standard is proposed by the Quality Standards Department of China Light Industry Association. This standard is under the jurisdiction of the National Tool Hardware Standardization Center. The drafting units of this standard: Shanghai Tool Industry Research Institute, Shijiazhuang Industrial and Agricultural Machinery Factory, Dalian House Equipment Tool General Factory, Shanghai Fengxian Tool Sanguang, etc.
The main drafters of this standard: Cheng Yongfeng, Zuo Zhenjiang, Tian Limin, Qin Delin, Wang Chende. This standard is entrusted to the National Tool Hardware Standardization Center for interpretation. 231
1 Range
Light Industry Standard of the People's Republic of China
Construction Tools (Masonry Tools)
QB/T 2212.1---1996
This standard specifies the classification and naming of construction tools (masonry tools), and specifies the usage range, and is applicable to and compiles product standards of various levels of masonry tools in my country.
The figures in this standard are only schematic diagrams and do not restrict the design of products by manufacturers. 2 Classification and naming of trowels
2.1 Flat trowels
The classification and naming of flat trowels shall be as specified in Table 1. Table 1
Scope of use
Used for smoothing the floor and walls
Approved by China Light Industry Federation on March 22, 1996
Classification and naming of flat trowels
Pointed flat trowel
Rectangular flat trowel
Trapezoidal flat trowel
Implemented on December 1, 1996
Classification and naming of corner trowels shall be in accordance with the provisions of Table 2
QB/T 2212.1-1996
Table 2 Classification and naming of corner trowels
Scope of use
Used for smoothing the corners of walls
2.3 Classification and naming of pressers shall be in accordance with the provisions of Table 3. No.
Scope of use
Used for smoothing the floor and wall
Flat surface
3 Classification and naming of masonry tools
3.1 Masonry trowel
Table 3 Classification and naming of pressers
The classification and naming of masonry trowels shall be in accordance with the provisions of Table 4. Tools
Outer corner trowel
Inner corner trowel
Pointed presser
Rectangular presser
Trapezoidal presser
3.2 Boron knife
Scope of use
Used for masonry operations
Mix (mix) mortar, shovel mortar, throw mortar, forge mortar, scrape mortar
QB/T 2212.1--1996
The classification and naming of masonry tools shall be in accordance with the provisions of Table 5. Edit
Scope of use
Used for construction operations
Chopping bricks, digging mortar, spreading mortar
Classification and naming of masonry shovels
Table 5 Classification and naming of flip knives
Pointed masonry shovel
Rectangular iodine shovel
Trapezoidal masonry shovel
Rhombus masonry shovel
Leaf-shaped masonry shovel
Round-head masonry shovel
Oval masonry shovel
Single-edged boron knife
Scope of use
Used for construction operations
Chopping bricks, digging mortar, spreading mortar
The classification and naming of brick knives shall be in accordance with the provisions of Table 6.
Scope of use
Used for grinding and construction operations
QB/T 2212.1 ---1996
Continued Table 5
Table 6 Classification and naming of brick knives
The classification and naming of tools shall be in accordance with the provisions of Table 7. bzxZ.net
Table 7 Classification and naming of trowels
5 Plumbs
Scope of use
Used for ground and wall division during plastering
Used for construction operations
Used for polishing external brick wall mortar joints
Used for wall grouting
The classification and naming of plumbs shall be in accordance with the provisions of Table 8. Work
Double-edged masonry trowel
Brick trowel
Brick axe
Divider
Seam slipper
Seam tie
Scope of use
Check the verticality and levelness of the wall
6 Terminology of parts
6.1 Naming of working parts
The naming of working parts shall be in accordance with the provisions of Table 9.
QB/T 2212.1-1996
Classification and naming of plumb bobs
Table 9 Naming of working parts
Conical plumb bob
Cylindrical plumb bob
Prismatic plumb bob
Flat trowel
Angle trowel
6.2 Naming of operating parts
The naming of operating parts shall be in accordance with the provisions of Table 10.
6.3 Nomenclature of Connectors
QB/T 2212.1—1996
Continued Table 9
Nomenclature of Operating Parts
The nomenclature of connectors shall comply with the provisions of Table 11.
QB/T 2212. 1-—1996
Table 11 Nomenclature of Connectors
China Diguo
Column-type Connecting Handle
Ribbon-type Connecting Handle
Crank-type Connecting Handle
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.