JB/T 2001.8-1999 Types and dimensions of circular flanges for water systems (PN=31.5MPa)
time:
2024-08-14 17:13:06
- JB/T 2001.8-1999
- in force
Standard ID:
JB/T 2001.8-1999
Standard Name:
Types and dimensions of circular flanges for water systems (PN=31.5MPa)
Chinese Name:
水系统 圆附接法兰 型式与尺寸(PN=31.5MPa)
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-06-28 -
Date of Implementation:
2000-01-01
Standard ICS number:
Fluid systems and general parts >> 23.100 Fluid power systemsChina Standard Classification Number:
Machinery>>General Parts>>J20 Hydraulic and Pneumatic Devices
alternative situation:
JB 2008-1984
Focal point Organization:
Metallurgical Equipment Standardization Technical CommitteePublishing Department:
Metallurgical Equipment Standardization Technical Committee
Description (Translated English) / downloadSkip to download
Summary:
JB/T 2001.8-1999 This standard is a revision of JB 2008-84 "Types and dimensions of circular flanges for hydraulic presses (Pg=315×100000Pa)". This standard specifies the types and dimensions of circular flanges. This standard is applicable to hydraulic systems with a nominal pressure of 31.5MPa. This standard was first published on January 1, 1984. JB/T 2001.8-1999 Types and dimensions of circular flanges for water systems (PN=31.5MPa) JB/T2001.8-1999 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
IC.s$ 23.110bZxz.net
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Round attached flange
Water system
Type and size
Water syslem-Round attached langeTypeand size
(PN=31.5 MPa]
This standard specifies the types and sizes of flanges for hydraulic systems with a force of 1.5 MPa. Reference standards
JB/T2401.8-1999
Generation 1184
The following standards contain provisions that constitute the provisions of this standard by citing them in 4 core dangers. When the standard is published, the version shown is valid. All standards will be revised. All parties using this standard are advised to use the latest version of the following standards. JET2001.51999 Hydraulic system flange Type and size of injection pad Type and size
1.1 Type should meet 1.
Burning nail: 2 Smoke time: 3-send blue: 4-connection: 5-copper pad drawing
Approved by the State Machinery Industry Bureau on 1-16-28
2000-0[-01 implementation
IR/T2001.8-1999
+95×21
E*&+W*,s1
05EX8F×01.501505
Ex2tWxorl
sst sit
21×*9
z 0s]
EI1XG1
m 10z
o18Loz sr
E'g10R LH
4 z Jar
5'1002
F% IOXR.1:STT
2 [00 1
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T 2001.1~2001.74—1999
Water system assembly and parts1999-06-28 Issued
National Machinery Industry Bureau
2(-01-U1 Implementation
Machinery Industry Standard of the People's Republic of China
Round attached flange
Water system
Type and size
Water syslem-Round attached langeTypeand size
(PN=31.5 MPa]
This standard specifies the types and sizes of flanges for hydraulic systems with a force of 1.5 MPa. Reference standards
JB/T2401.8-1999
Generation 1184
The following standards contain provisions that constitute the provisions of this standard by citing them in 4 core dangers. When the standard is published, the version shown is valid. All standards will be revised. All parties using this standard are advised to use the latest version of the following standards. JET2001.51999 Hydraulic system flange Type and size of injection pad Type and size
1.1 Type should meet 1.
Burning nail: 2 Smoke time: 3-send blue: 4-connection: 5-copper pad drawing
Approved by the State Machinery Industry Bureau on 1-16-28
2000-0[-01 implementation
IR/T2001.8-1999
+95×21
E*&+W*,s1
05EX8F×01.501505
Ex2tWxorl
sst sit
21×*9
z 0s]
EI1XG1
m 10z
o18Loz sr
E'g10R LH
4 z Jar
5'1002
F% IOXR.1:STT
2 [00 1
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG 20608-1997 Flexible graphite composite gasket for steel pipe flanges (European system)
- JB/T 9041-1999 Adsorption tank
- GB/T 14926.23-2001 Detection method of Sendai virus in experimental animals
- SJ/T 10588.15-1994 Technical data of Type DB-443 electronic glass
- GB/T 5823-1986 Terminology of building doors and windows
- SJ 20609-1996 Electronic Design Exchange Format
- HG 20546.3-1992 Regulations on Professional Technical Management of Equipment Layout for Chemical Plants
- GB/T 4656.1-2000 Simplified representation of bars, profiles and their cross-sections in technical drawings
- LS/T 1701-2004 Classification and codes of grain information—Classification and codes of grain enterprise
- GBJ 64-1983 Design specification for overvoltage protection of industrial and civil power equipment
- GB/T 4942.2-1993 Protection grade of low voltage electrical enclosure
- GB 18485-2001 Pollution Control Standard for Incineration of Domestic Waste
- GB 10460-1989 Peas
- HG/T 2806-1996 Austenitic stainless steel pressure vessel manufacturing management rules
- GB 16211-1996 Hygienic standard for long-term phosphorus in workshop air
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：bzxznet@163.com