GB 6995.5-1986 Identification marks of wires and cables Part 5: Identification marks of insulated cores of power cables
time:
1970-01-01 08:00:00
- GB 6995.5-1986
- Abolished
Standard ID:
GB 6995.5-1986
Standard Name:
Identification marks of wires and cables Part 5: Identification marks of insulated cores of power cables
Chinese Name:
电线电缆识别标志 第5部分:电力电缆绝缘线芯识别标志
Standard category:
National Standard (GB)
-
Date of Release:
1886-11-20 -
Date of Implementation:
1887-10-01 -
Date of Expiration:
2009-03-01
Standard ICS number:
Electrical Engineering>>29.060 Wires and CablesChina Standard Classification Number:
Electrician>>Electrical Materials and General Parts>>K10 Electrical Materials and General Parts Comprehensive
alternative situation:
Replaced by GB/T 6995.5-2008Procurement status:
neq BS 6480
Release date:
1986-11-20Review date:
2004-10-14Drafter:
Qian YuexinDrafting Organization:
Shanghai Cable & Cable InstituteFocal point Organization:
National Technical Committee for Standardization of Wires and CablesProposing Organization:
Ministry of Machinery Industry of the People's Republic of ChinaPublishing Department:
National Bureau of StandardsCompetent Authority:
China Electrical Equipment Industry Association
Skip to download
Summary:
This standard applies to the identification marks of insulated cores of power cables, including oil-filled cables, non-drip oil-immersed insulated cables, viscous oil-impregnated paper insulated cables, cross-linked polyethylene insulated cables, polyvinyl chloride insulated cables, polyethylene insulated cables and rubber insulated cables. GB 6995.5-1986 Identification marks of wires and cables Part 5: Identification marks of insulated cores of power cables GB6995.5-1986 Standard download and decompression password: www.bzxz.net
Some standard content:
1 Scope of application
National Standard of the People's Republic of China
Wire and cable identification marks
Part 5: Power cable insulated core
Identification marks
Markings for electric cables aad wiresPart 5: Identifications of insulated coresof power cables
UDC 621.315.1
1.2-771.6bZxz.net
GB 6995.5—86
This standard applies to power cable insulation The identification marks of wire cores include oil-filled cables, non-drip oil-impregnated paper insulated cables, viscous oil-impregnated paper insulated cables, cross-linked vinyl insulated cables, polyfluoroethylene insulated cables, polyethylene insulated cables and rubber insulated cables. 2 Wire core identification
.1 The insulated core of power cable adopts two methods of numerical identification and color identification. 2.2 Oil-filled cables, non-drip oil-impregnated paper insulated cables, and sticky oil-impregnated paper insulated cables are identified by numbers. 2. Cross-linked polyethylene insulated cables, polyethylene insulated cables, polyfluoroethylene insulated cables and rubber insulated cables are identified by color. Numerical identification is allowed under special circumstances. 8 Numeric identification
.1 General requirements
3.1.1 The outer paper tape of the insulating layer of the insulated core should be printed with Arabic numerals. 3.1.2 Unless otherwise specified, the color of digital signs shall be white. 3.1. Number signs should be clear and legible. 3.2 Use of numerical signs
The insulated cores of multi-core cables should use different numerical signs and should comply with the following regulations: 2-core cable.
3-core cable...
4-core cable. ·
.*-0,1,2,3
The numbers 1,2,3 are used for the main wire core , 0 is used for the neutral core. Note: The neutral core core with a nominal cross-section of 16mm is allowed to be unmarked and use its natural color. 3.3 The maximum distance between two adjacent complete digital signs on the insulated wire core is 25mm, and the minimum height of the digital signs is 4.5mm. 3.4 The colorants used in digital signs should not be easy to fade, and should be chemically neutral and have no harmful effects on the cable paper fibers. 4 Color identification
4.1 The insulated cores of multi-core cables should be marked with different colors and should comply with the following regulations. 2-core cable
3-core cable·
4-core cable
National Bureau of Standards released on November 20, 1986
Red, light blue| |tt||·Red, yellow, green
Red, yellow, green, light blue
198T-10-01 implementation
GB 6895.5—86
Red, yellow, and green are used for the main core, and light blue is used for the neutral core. 4.2 The insulated core of polyvinyl chloride insulated cables should generally be made of colored insulation materials, but numerical signs are also allowed. 4.3 Marking yarn or marking ribbon is allowed to be used for insulated wire cores that are not easily colored. Additional notes:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Shanghai Cable Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Shanghai Cable Research Institute of the Ministry of Machinery Industry. The main drafter of this standard is Qian Yuexin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Wire and cable identification marks
Part 5: Power cable insulated core
Identification marks
Markings for electric cables aad wiresPart 5: Identifications of insulated coresof power cables
UDC 621.315.1
1.2-771.6bZxz.net
GB 6995.5—86
This standard applies to power cable insulation The identification marks of wire cores include oil-filled cables, non-drip oil-impregnated paper insulated cables, viscous oil-impregnated paper insulated cables, cross-linked vinyl insulated cables, polyfluoroethylene insulated cables, polyethylene insulated cables and rubber insulated cables. 2 Wire core identification
.1 The insulated core of power cable adopts two methods of numerical identification and color identification. 2.2 Oil-filled cables, non-drip oil-impregnated paper insulated cables, and sticky oil-impregnated paper insulated cables are identified by numbers. 2. Cross-linked polyethylene insulated cables, polyethylene insulated cables, polyfluoroethylene insulated cables and rubber insulated cables are identified by color. Numerical identification is allowed under special circumstances. 8 Numeric identification
.1 General requirements
3.1.1 The outer paper tape of the insulating layer of the insulated core should be printed with Arabic numerals. 3.1.2 Unless otherwise specified, the color of digital signs shall be white. 3.1. Number signs should be clear and legible. 3.2 Use of numerical signs
The insulated cores of multi-core cables should use different numerical signs and should comply with the following regulations: 2-core cable.
3-core cable...
4-core cable. ·
.*-0,1,2,3
The numbers 1,2,3 are used for the main wire core , 0 is used for the neutral core. Note: The neutral core core with a nominal cross-section of 16mm is allowed to be unmarked and use its natural color. 3.3 The maximum distance between two adjacent complete digital signs on the insulated wire core is 25mm, and the minimum height of the digital signs is 4.5mm. 3.4 The colorants used in digital signs should not be easy to fade, and should be chemically neutral and have no harmful effects on the cable paper fibers. 4 Color identification
4.1 The insulated cores of multi-core cables should be marked with different colors and should comply with the following regulations. 2-core cable
3-core cable·
4-core cable
National Bureau of Standards released on November 20, 1986
Red, light blue| |tt||·Red, yellow, green
Red, yellow, green, light blue
198T-10-01 implementation
GB 6895.5—86
Red, yellow, and green are used for the main core, and light blue is used for the neutral core. 4.2 The insulated core of polyvinyl chloride insulated cables should generally be made of colored insulation materials, but numerical signs are also allowed. 4.3 Marking yarn or marking ribbon is allowed to be used for insulated wire cores that are not easily colored. Additional notes:
This standard was proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Shanghai Cable Research Institute of the Ministry of Machinery Industry. This standard was drafted by the Shanghai Cable Research Institute of the Ministry of Machinery Industry. The main drafter of this standard is Qian Yuexin.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SJ 20637-1997 Specification for aluminum nitride powder for electronic ceramics
- GB/T 19785-2005 Stretch packaging
- JB/T 9040-1999 Belt filter press
- HG/T 2956.8-2001 Determination of loss on ignition in boron and magnesium ores - Gravimetric method
- SY 6346-1998 Safety regulations for towing and mooring of shallow water mobile platforms
- SB/T 10411-2007 Appraisal criteria for business devise
- GB 18209.3-2002 Safety instructions, signs and operations of machinery Part 3: Requirements for the location and operation of operating parts
- GB 1000.1-1988 Technical requirements for pin-type porcelain insulators for high-voltage lines
- GB/T 2951.25-1994 Test methods for mechanical and physical properties of wires and cables - Anaerobic bacterial corrosion test for outer sheath
- GB/T 14999.3-1994 Longitudinal fracture test method for high temperature alloy bars
- TD/T 1005-2003 Regulations for gradation on agricultural land
- GB 16543-1996 Safety regulations for explosion prevention of bituminous coal injection system in blast furnace
- JB/T 5065-1991 General technical requirements for arc welding robots
- JB/T 8293.1-1999 Floating seal
- JB/T 9178.1-1999 General technical requirements for free forgings on hydraulic presses
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:wymp4wang@gmail.com