
GB/T 2884.5-1996 Yangtze River system segmented barge type standard series--500-ton segmented barge type standard for direct access and water transport network in the middle and lower reaches of the Yangtze River
time:
2024-08-12 14:51:20
- GB/T 2884.5-1996
- in force
Standard ID:
GB/T 2884.5-1996
Standard Name:
Yangtze River system segmented barge type standard series--500-ton segmented barge type standard for direct access and water transport network in the middle and lower reaches of the Yangtze River
Chinese Name:
长江水系分节驳船型尺度系列--长江中下游干支直达和水运网500吨 级分节驳船型尺度
Standard category:
National Standard (GB)
-
Date of Release:
1996-06-17 -
Date of Implementation:
1997-01-01
Standard ICS number:
Shipbuilding and offshore structures >> 47.060 Inland vesselsChina Standard Classification Number:
Ships>>Ship General>>U14 Inland Waterway Transport Ship General
alternative situation:
Replaces GB 2884.5-1981; GB 2884.6-1981; replaced by GB/T 2884.2-2009
Release date:
1981-12-31Review date:
2004-10-14Drafting Organization:
Institute of Standards and Metrology, Ministry of TransportFocal point Organization:
National Technical Committee for Inland Waterway StandardizationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
Ministry of Transport

Skip to download
Summary:
This standard specifies the general requirements, model composition and markings for the 500-ton segmented barges on the Yangtze River. This standard applies to segmented barges that navigate the Class IV waterways of the Yangtze River and its connecting trunk and branch channels. GB/T 2884.5-1996 Yangtze River System Segmented Barge Model Scale Series - Segmented Barge Model Scale for 500-ton Segmented Barges on the Yangtze River and its connecting trunk and branch channels GB/T2884.5-1996 Standard download decompression password: www.bzxz.net

Some standard content:
GB/T 2884.5—1996
Foreword
This standard is a revision of GB2884.5—81 and GB2884.6—81, and the main dimensions of the ship type have been changed. After the revision of this standard, the original GB2884.5—81 and GB2884.6-81 are abolished. The division of waterways in this standard is consistent with GB139—90 "Standards for Inland Waterways".
This standard is proposed by the Ministry of Transport of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Inland Waterway Standardization. The drafting units of this standard are the Institute of Standards and Metrology of the Ministry of Transport and the Yangtze River Ship Design Institute. The drafters of this standard are Liu Yiru, Xiang Zhizhong, and Wang Feifei. This standard was first issued on December 31, 1981, and the Yangtze River Ship Design Institute is entrusted with the interpretation of this standard. W.bzsosocomNational Standard of the People's Republic of China
Dimensions of Integrated barges for the Changjlang waterwayEDiraessions of Integrated barges for the direct transpert In.main-branch routes of the middle-downstresm cf theChangaag snd waterway getwork-50EwTScope
This standard specifies the general requirements, model composition and markings of 500-ton segmented barges in the Yangtze River. GB/R 2884.5--1996
代58 Www.bzxZ.net
This standard applies to segmented barges for direct transpert In.main-branch routes of the middle-downstresm cf theChangaag snd waterway getwork-50EwTScope
This standard specifies the general requirements, model composition and markings of 500-ton segmented barges in the Yangtze River. GB/R 2884.5--1996
代58
This standard applies to segmented barges for direct transpert In.main-branch routes of the middle-downstresm and the connecting waterway in the middle and lower reaches of the Yangtze River. 2 Definitions
This standard adopts the following definitions:
Water Transport Network Taterayatwork
The inland waterway of the permanent system (including the Beijing-Hangzhou Grand Canal) connected by the Beijing-Kang, Xiang-Guang, Gan-Yue, Zheng-Huai and other canals, including the Yangtze River, Pearl River, Qiangjiang River, Huaihe River, Yellow River, Haihe River, etc.
3 General requirements
3.1 Ship type tonnage, 500t.
3.2 Age type main dimensions, total length 45m, molded breadth 10.8m, draft 1.6~2.1 m,4 model composition
The model consists of four parts:
Barge section tonnage
"Jie" is the first letter of the Chinese pinyin, indicating "section barge" "Net" is the first letter of the Chinese pinyin, indicating "water transport network" "Chang" is the first letter of the Chinese pinyin, indicating "Yangtze River" Approved by the National Technical Supervision Bureau on June 17, 1996 and implemented on January 1, 1997
GR/T28 84.5-1996
5.1 Each barge is equipped with a signboard with the following information: a) ship model, factory serial number, standard number; b) total length, waterline length, molded width, molded depth, designed draft, full load displacement c) manufacturer's name
d) year and month of manufacture.
5.2 The signboard is rectangular in shape, 330mm long and 200mm wide, and is made of metal material (car, aluminum, etc.). 10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Foreword
This standard is a revision of GB2884.5—81 and GB2884.6—81, and the main dimensions of the ship type have been changed. After the revision of this standard, the original GB2884.5—81 and GB2884.6-81 are abolished. The division of waterways in this standard is consistent with GB139—90 "Standards for Inland Waterways".
This standard is proposed by the Ministry of Transport of the People's Republic of China. This standard is under the jurisdiction of the National Technical Committee for Inland Waterway Standardization. The drafting units of this standard are the Institute of Standards and Metrology of the Ministry of Transport and the Yangtze River Ship Design Institute. The drafters of this standard are Liu Yiru, Xiang Zhizhong, and Wang Feifei. This standard was first issued on December 31, 1981, and the Yangtze River Ship Design Institute is entrusted with the interpretation of this standard. W.bzsosocomNational Standard of the People's Republic of China
Dimensions of Integrated barges for the Changjlang waterwayEDiraessions of Integrated barges for the direct transpert In.main-branch routes of the middle-downstresm cf theChangaag snd waterway getwork-50EwTScope
This standard specifies the general requirements, model composition and markings of 500-ton segmented barges in the Yangtze River. GB/R 2884.5--1996
代58 Www.bzxZ.net
This standard applies to segmented barges for direct transpert In.main-branch routes of the middle-downstresm cf theChangaag snd waterway getwork-50EwTScope
This standard specifies the general requirements, model composition and markings of 500-ton segmented barges in the Yangtze River. GB/R 2884.5--1996
代58
This standard applies to segmented barges for direct transpert In.main-branch routes of the middle-downstresm and the connecting waterway in the middle and lower reaches of the Yangtze River. 2 Definitions
This standard adopts the following definitions:
Water Transport Network Taterayatwork
The inland waterway of the permanent system (including the Beijing-Hangzhou Grand Canal) connected by the Beijing-Kang, Xiang-Guang, Gan-Yue, Zheng-Huai and other canals, including the Yangtze River, Pearl River, Qiangjiang River, Huaihe River, Yellow River, Haihe River, etc.
3 General requirements
3.1 Ship type tonnage, 500t.
3.2 Age type main dimensions, total length 45m, molded breadth 10.8m, draft 1.6~2.1 m,4 model composition
The model consists of four parts:
Barge section tonnage
"Jie" is the first letter of the Chinese pinyin, indicating "section barge" "Net" is the first letter of the Chinese pinyin, indicating "water transport network" "Chang" is the first letter of the Chinese pinyin, indicating "Yangtze River" Approved by the National Technical Supervision Bureau on June 17, 1996 and implemented on January 1, 1997
GR/T28 84.5-1996
5.1 Each barge is equipped with a signboard with the following information: a) ship model, factory serial number, standard number; b) total length, waterline length, molded width, molded depth, designed draft, full load displacement c) manufacturer's name
d) year and month of manufacture.
5.2 The signboard is rectangular in shape, 330mm long and 200mm wide, and is made of metal material (car, aluminum, etc.). 10
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- SY/T 5587.7-1993 Well cleaning procedures for conventional well repair and well washing in oil and water wells
- QB/T 2727-2005 Leather color fastness test Color fastness to light: Xenon arc
- GB 3836.10-1991 Explosion-proof electrical equipment for explosive environments. Gas-tight electrical equipment "h"
- CJJ 14-1987 Urban Public Toilet Planning and Design Standard CJJ14-87
- SJ/T 10588.14-1994 Technical data of Type DB-442 electronic glass
- HG/T 20515-2000 Instrument Isolation and Purging Design Specifications (with clause explanation)
- GB/T 2564-1981 Determination of acid value and saponification value of montan wax
- JB/T 7955-1999 High-speed steel teeth for face and face milling cutters and shell face milling cutters
- GB/T 5642.2-1985 Flared welded pipe fittings
- JB/T 81-1994 Raised panel flat welded steel pipe flange
- JB/T 3411.71-1999 Dimensions of elastic clamping sleeves for taps
- GB/T 4967-1995 General technical requirements for electronic calculators
- GB/T 50340-2003 Design standard for residential buildings for the elderly
- GB/T 15538-1995 Software Engineering Standard Taxonomy
- NY 5175-2002 Pollution-free food longan
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com