GB/T 4169.6-1984 Spacers for plastic injection mould parts
time:
2024-08-10 14:23:10
- GB/T 4169.6-1984
- Abolished
Standard ID:
GB/T 4169.6-1984
Standard Name:
Spacers for plastic injection mould parts
Chinese Name:
塑料注射模具零件 垫块
Standard category:
National Standard (GB)
-
Date of Release:
1984-02-27 -
Date of Implementation:
1985-01-01 -
Date of Expiration:
2007-04-01
Standard ICS number:
Mechanical Manufacturing>>Chipless Processing Equipment>>25.120.30 Molding Equipment and Casting EquipmentChina Standard Classification Number:
Machinery>>Process Equipment>>J46 Mold
alternative situation:
Replaced by GB/T 4169.6-2006
Review date:
2004-10-14Drafting Organization:
Guilin Electric Appliance InstituteFocal point Organization:
National Technical Committee for Mould StandardizationPublishing Department:
National Standardization AdministrationCompetent Authority:
National Standardization Administration
Description (Translated English) / downloadSkip to download
Summary:
GB/T 4169.6-1984 Plastic injection mold parts spacer GB/T4169.6-1984 standard download decompression password: www.bzxz.net
Standard contentSome standard content:
Marking example:
National Standard of the People's Republic of China
Plastic injection mold parts
Components of iajectioa mould for plastlcs-S pacer blocks
B=20, L=100, H=40:
Pad 20 × 100 × 40 GB 4169.6—84L
National Bureau of Standards 19 84-02-27 issued 400
UDC 621.726.29
GB 4189.684
The rest 4
1985-01-01 implemented
GB 4160.884
Material: A3 steel GB700—79 "Technical Conditions for Ordinary Carbon Structural Steel". Technical conditions:
The geometric tolerance values marked in the figure shall be in accordance with Appendix 1 of GB1184-80, 1 is level 5. ,
Others shall be in accordance with GB4170-84.
Additional notes: Www.bzxZ.net
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Guilin Electric Science Research Institute of the Ministry of Machinery Industry. mm
This standard was drafted by the Guilin Electric Science Research Institute of the Ministry of Machinery Industry, the Shanghai Plastic Products Mould Factory of the Ministry of Light Industry, the Chongqing Radio Factory of the Ministry of Electronics Industry, the Shanghai Spark Mould General Factory of Shanghai, the Beijing Qingyun Instrument Factory of the Ministry of Aviation Industry, and the Taiyuan Weidong Chemical Factory of the Ministry of Ordnance Industry. The main drafters of this standard are Zhang Ansheng, Zhao Yunjie, Yang Bingxin, Wang Xu, Wei Min, and Wu Zhengyuan.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
National Standard of the People's Republic of China
Plastic injection mold parts
Components of iajectioa mould for plastlcs-S pacer blocks
B=20, L=100, H=40:
Pad 20 × 100 × 40 GB 4169.6—84L
National Bureau of Standards 19 84-02-27 issued 400
UDC 621.726.29
GB 4189.684
The rest 4
1985-01-01 implemented
GB 4160.884
Material: A3 steel GB700—79 "Technical Conditions for Ordinary Carbon Structural Steel". Technical conditions:
The geometric tolerance values marked in the figure shall be in accordance with Appendix 1 of GB1184-80, 1 is level 5. ,
Others shall be in accordance with GB4170-84.
Additional notes: Www.bzxZ.net
This standard is proposed by the Ministry of Machinery Industry of the People's Republic of China and is under the jurisdiction of the Guilin Electric Science Research Institute of the Ministry of Machinery Industry. mm
This standard was drafted by the Guilin Electric Science Research Institute of the Ministry of Machinery Industry, the Shanghai Plastic Products Mould Factory of the Ministry of Light Industry, the Chongqing Radio Factory of the Ministry of Electronics Industry, the Shanghai Spark Mould General Factory of Shanghai, the Beijing Qingyun Instrument Factory of the Ministry of Aviation Industry, and the Taiyuan Weidong Chemical Factory of the Ministry of Ordnance Industry. The main drafters of this standard are Zhang Ansheng, Zhao Yunjie, Yang Bingxin, Wang Xu, Wei Min, and Wu Zhengyuan.
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- GB/T 2832-1996 Test method for external compressive strength of ceramic pipes
- GB/T 5440-1985 Stereo recorders for broadcasting
- JB/T 50048-1999 Rotor sand mixer product quality classification
- HG 2955-1989 Rules for the preparation of standards for molecular absorption spectroscopy analysis methods
- JB/T 7114-1993 Method for compiling product models of power capacitors
- JB/T 9734-1999 Technical requirements for fuel injection pump test bench
- GB/T 9214-1988 Carbide conical round head rotary files
- GB/T 35641-2017 Basic requirements for engineering surveying and mapping
- SY 6516-2001 Safety regulations for electric welding in the petroleum industry
- GB/T 14359-1993 Marine emergency piston air compressor
- SY/T 10036-2001 Specification for preparation of design documents for offshore oil projects
- QB/T 1708-1993 Shoemaking paperboard
- JJG 506-1987 DC Comparator Bridge
- GB/T 43500-2023 Safety management systems—Requirements
- GB/T 3048.5-1994 Test methods for electrical properties of wires and cables - Insulation resistance test - Galvanometer comparison method
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]