GB/T 2885.5-1981 Basic parameters and dimensions of metal ore flatbed cars

GB/T 2885.5-1981 Basic parameters and dimensions of metal ore flatbed trucks GB/T2885.5-1981 standard download decompression password: www.bzxz.net

The People's Republic of China
National Standard
Metal Ore Flatbed Truck
Basic Parameters and Dimensions
This standard applies to underground metal mines or other mines. The basic parameters and dimensions of metal ore flatbed trucks used to transport equipment or other items along underground tunnels and surface industrial sites should comply with the provisions of the table. Note: This figure only shows the dimension symbols.
State Administration of Standardsbzxz.net
State Administration of Nonferrous Metals Industry proposed to implement on July 1, 1982
Beijing Nonferrous Metallurgy Design and Research Institute
Total 3 pages Page 2
YPC1-6
YPC3-6
YPC3-7
YPC5-6
YPC5-7
YPC5-9
GB2885.5-81
Note: Height H and traction height h are measured from the rail surface (when unloaded) 14
Traction height
YKAO KAca
Traction
(not too large
The model of the metal ore flatbed car is stipulated as:
GB2885.5—81
Marking example:
Load capacity 3t, track gauge 600mm metal ore flatbed car YPC3-6 flatbed car GB2885.5-81
Total 3 pages Page 3
Track gauge code: 6 means 600mm
7 means 762mm
9 means 900mm
Load code (t
Mine car code
Flatbed car code
Metal ore code
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.