JB/T 5511-1991 H type elastic block coupling
time:
1991-07-10 16:00:00
- JB/T 5511-1991
- Abolished
Standard ID:
JB/T 5511-1991
Standard Name:
H type elastic block coupling
Chinese Name:
H 型弹性块联轴器
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1991-07-10 -
Date of Implementation:
1992-07-01 -
Date of Expiration:
2007-05-01
China Standard Classification Number:
Machinery>>General Parts>>J19 Couplings, Brakes and Transmissions
alternative situation:
Replaced by JB/T 5511-2006
Description (Translated English) / downloadSkip to download
Summary:
This standard specifies the structural type, main dimensions and technical requirements of H-shaped elastic block couplings. JB/T 5511-1991 H-type elastic block coupling JB/T5511-1991 standard download and decompression password: www.bzxz.net
Standard contentSome standard content:
Machinery Industry Standard of the People's Republic of China
H-shaped elastic block coupling
1 Subject content and scope of application
JB 5511—91
This standard specifies the H-shaped elastic block coupling Structural type, main dimensions and technical requirements of block coupling (hereinafter referred to as coupling). This standard is applicable to couplings that connect two coaxial transmission shaft systems and have certain compensation for the relative displacement of the two axes and buffering and shock absorption properties. The operating temperature is -30~80℃, and the nominal transmission torque is 18~63000N·m. 2 Reference standards
GB3507
GB3852
GB3931
Mechanical coupling nominal torque series
Coupling shaft hole and keyway type and ruler
Mechanical coupling terms
Gray iron castings
GB9439
GB11352
Casted carbon steel parts for general engineering purposes
JB /ZQ 4000.1
JB/ZQ 4000. 2
JB/ZQ 4000.5
General technical requirements for product inspection
General technical requirements for cutting parts
Castings General technical requirements
General technical conditions for packaging
JB/ZQ4286
Rubber Part A hardness test method
GB 1801 | | tt | | GB 1689 | | tt | Determination of the wear resistance of vulcanized rubber
Determination method of constant deformation compression permanent deformation of vulcanized rubber Rubber hot air aging test method
GB1690
Liquid resistance test method of vulcanized rubber
3 types, Basic parameters and main dimensions
3.1 Structural type
HTLA type.HTLB type-
HTLC type, HTLD type
HTLE type-
Basic type;
With brake wheel type;
-With intermediate shaft sleeve type.
3.2 The basic parameters and main dimensions should comply with the provisions of Figures 1 to 5 and Tables 1 to 5. The Ministry of Mechanical and Electronics Industry of the People's Republic of China approved the implementation on 1992-07-01 on 1991-07-01
nominal
transfer| |tt||N·m
JB 5511 - 91
Y-type shaft hole Z-type shaft hole J-type shaft hole Ji-type shaft hole Y-type shaft hole mark a
mark| |tt||Figure 1HTI.A type
Basic parameters and main dimensions of HTLA coupling table 1
Permissible speed
r/ min
HTLA231.55 000
Steel|| tt||5000
shaft hole diameter
16,18,19||tt ||20,22.24
16,18,19
20,22,24
20,22,24
635 0005 00025,28
30,32.35,38||tt ||40
50005000
30.32,35,38
40,42,45
32,35.38| |tt||HTLA6250
40,42,45,48
45005000
Shaft hole length
Y type
82|| tt||112
J, Z type
L| |tt||mm
38||tt ||44
88| |tt||112
Y type
Z type
Chongcheng
249570
422711080
311125/92
Rotate custom
1. 000. 000 3
Nominal
Torque
Permissible speed
r/min| |tt||Steel
Shaft hole diameter
10005000
10,12.45.48
50.55.56
HTLA85603500|470050,55.56
31004 20060,63,65.||tt| |HTLA9 900
IITIA101 400|2 800|3 800
HTI .AI1 2 0002 500/3 300
HT1.A12 2 800
65.70.71.75
80,85.90.95
22003000
80,85.90,95
HTIA13400020002700
JB5511
Continued Table 1|| tt||Shaft hole length
Y type
J., Z type
112184
84|| tt||107
167||tt| |132
1-12||tt| |1-417
177||tt| |212
Note: "I) Weight and moment of inertia are the largest approximate calculated values ??of each model. (2) The instantaneous overload torque shall not be greater than 2 times the nominal torque value Z-type shaft hole
J, type shaft hole
Y-type shaft hole Y-type shaft hole| |tt||Logo
Y type
Figure 2 HTLB type
140100!
1391160110
42180125
47200140| |tt||52225150
65280180
26.12|| tt||38.9
Moment of inertia
0.033| |tt||0.061
HTIR1| |tt||HTLB2
HTLB8||tt| |HTLB9
Nominal
Torque
JB 5511 -- 91
Table 2 Basic parameters and main dimensions of HTLB coupling Allowable speed
Shaft hole diameter
160 |5 000| 5 000
30,32,35,38
40′,42\,45*| |tt||32,35,38
25045005000
3554 000|5 000| |tt||560
35004700
40.42,45,48
50.55*,56*
4245,48
50.55,56||tt ||60*63',65*
50,55,56
3100|4200
70*,71 *,75*
1 4002800|3 800
80*,85*
2000/2500/3300
280022003000
400020002700
HTLB10
HTLB11
56001800|2400
65,.70,71, 75
80.85,90*
80,85,90,95
80.85,90.95
100,110
100,110,
120,125
710016002100120.125
130,140
Shaft hole length||tt ||Y type J type
84|| tt||82
112||tt| |84
142107
142107
172132
132|| tt||107
92||tt| |Das
100—80
69|160↓11095
74180
125108
167|| tt||172
212167
200140122||tt| |225150138
250165
110|280|180172
120315|200200
128350230
50|| tt||53
Weight
kg||tt| |6.0
Moment of inertia
17.80. 039
0.35| |tt||81.0 1 0. 55
HTI.B12. tt||钢
100001400
长孔进得
JB 5511—91
绝表2| |tt||长孔方法
Y型J型
110,120,125
【212
130,140,150
120,125||tt ||HTLB13
12500|1300
011700
130,140,150
HTLE14
HTLB15
HTLB16||tt ||16000|1200/1500
2000011001400
2800010001300
130,140,150
160,170
140,150
160.170.180
160,170,180
HTI.B1735500l9001200
HTLB18
HTLB19
170,180
190,200,220
450001860
11 100190,200.220
200,220
63 0008001 000
240,250
212|| tt||252
167||tt| |202
352282
410|| tt||242
B||tt| |mm
400250250
155|440265265
160|480300|300
175520315315
201560
352352 6
215610
1384| |tt||234660
注：①联辆有限公司可电视量量是按滷铁件minimum axis孔化学可以的反应值，②相行“*号的达孔图度不进行d2。 ③瞬时过进矩矩不可以公称老矩图度2倍。@)表中包装P的内得拖爪的minimum包装。 美国
Y型長孔
J型長孔
Y型長孔
图３HTIC型
416|| tt||6
weight
115||tt ||125
电影足量
219. |许用电视
JB 5511 --91
表3HTLC型联美器安全前盘和电影包括长孔化合
dt t ,d
32,35,38
25028003800
40.42.45.48
38| |tt||355
300040,42.45.18
42,45+48
560 |2 200/ 3,000| 50.55,56
HTLC4900180012400
HTL.C5| |tt||200014001900
128001100
65.70,71,75
11500||tt ||80,85,90,95
1400011001 500
80,85,90,95
100,110||tt| |长孔图像
Y型型E
60| |tt||11284
142107
142107
142107
172132
142107||tt ||85
172132
212167
172132
212167
160| |tt||167
12520092
140250100332
160250|110|38
401255
302| |tt||注：(D联美地的重盐可进矩考量是按美铁件minimum 龙孔化场计间的approximation值。2)瞬时过进矩矩不可以公称考矩固于2倍： mark||tt ||396
型美型孔小小龙孔丫型美孔
[图4HTID型
180|315/125
重前电影臚量
—kg'm\
0.172||tt ||31.8
225|400|15051
250500|165/60
28050018065
3|120.63.26
Nominal" allowable speed
Torque
Lnj| |tt||r/min
JB 5511—91
Table 4 Basic parameters and main dimensions of HILD coupling Shaft hole diameter
did?| |tt||32,35,38
HTLD1|2502 800|3 800|
40,42,45,48*
38||tt ||HTLD2
300040,42,45,48
50,55,56
HTID31 560 |2 2003 000
180012400
HT1D520001400|1900
60*,63' ,65*
60,63.65,70*
71°,75*
65,70,71,75
80 ,85,90*
HTLD6|2 800|1100|1 500| 80,85,90.95100*
180,85,90,95||tt| |HTID74 000|1 1001 500
100,110
HTLD85 6001
9001200
HTLD97100
9001200
Hole length
Y type J type
60||tt ||84
142107
142107
105|| tt||35
12520075
30||tt| |1402508033
173|160|2509538
18031510841
38|| tt||Weight
Rotation
Snap disk
25.00.148
29.20.167
225400138512
6177.5||tt| |261
132|210|40215250500|15560369119.9167
100,110,120,125 212
100,110,120,125 212|167
130,140
252|202
315|| tt||0.415
280|500|172|65 3
73131.93.56
95|1907
31563020070
350|63023074
15393||tt ||Note: (1) The weight and moment of inertia of the coupling are approximate values ??calculated based on the minimum shaft hole size of the cast iron part. ②The shaft hole diameter marked with "" is not applicable to d. ③The instantaneous overload torque shall not be greater than 2 times the nominal torque value. ③Dimension P in the table is the minimum size for disassembling the melon. 3
Nominal
Transfer box
JB 5511 --- 91
Y type Shaft hole positive shaft hole
J1 type shaft hole
Y type shaft hole. Logo
Figure 5 HTLE type
Table 5 Basic parameters and main dimensions of HTLE coupling Allowable speed
63↓5000
Countrywww.bzxz.net
Shaft hole diameter
5 000/ 25,28
10015000
30,32,35 ,38
HTLE316015 000|5 00030.32,35,3840,42,45
HTLE4||tt| |HTLE5
2504 500|5 00040.42,45,48
38||tt| |3554 000|5 00040,42,45,48
50,55,56
560 |3 500|4 700| 50,55,56|| tt||60,63,65
90031004200
「Shaft hole length
Y type
112| |tt||62
38||tt ||44
142107
112| |tt||60.63.65,70.75
1421107
95| |tt||110
100140
125||tt ||9
180115
190| |tt||44
重盘| |tt||kg
||13.30.0207
17.00.034
22.5(0.059
33.40.111
迡矩|| time|| ||钢
长孔进得
380070.71.75
HTI.F9| |tt||1200025003300
HTLE10 |2 800|2 200 |3 000 80.85, 90.95100||tt ||JB 551191
绝表5
长孔方法
Y型型
142107
172132
142107||tt| |172
212167
225236
250236
注： （）The weight and rotation inertia of the shaft is the approximate value calculated according to the minimum shaft hole size of cast iron.倍。 3.3 电影字和论混型式及分在应电影GB3852的设计。 3.4 电视与电影
3.4.1 电视电视
3.4.2结果
联长器分号号
181252
结果型式：AB 、C、D、E
联长器“联”字汉语拼音第一·个安全式弝\弹”字汉语拼音第一·个Alphabet-H 形开光块的\H\ Alphabet
tt|| |支动端：Y型量孔，A型量水，d,一35mm，L=82mm从动端：Y型量孔A型量水，d2-35mm，L=82mmHTLA5联量器35X82JB5511--91||tt ||例2:HTLB10型开工块联长器
支动端：Y型長孔，B.型论水，d,=90mm，L=172mm从动端：J型長孔，B,型论混，dz=100mm，I.-167mmHTLB10联长器100X167
B,90×172
JB 5511—91
41.50.190
6155.9 0. 3:0
HTLA5 elastic block coupling
Active end: Y-shaped shaft hole, A-type keyway, d, a 35mm, L=82mm Driven end: Y-shaped shaft hole, A-type keyway, d2-35mm, L= 82mmHTLA5 coupling 35X82JB5511--91
Example 2: HTLB10 elastic block coupling
Active end: Y-shaped shaft hole, B. type keyway, d,=90mm, L=172mm from Moving end: J-type shaft hole, B-type keyway, dz=100mm, I.-167mm HTLB10 coupling 100X167
B, 90×172
JB 5511—91
Weight
Rotation
Inertia
41.50.190
6155.9 0. 3:0
HTLA5 elastic block coupling
Active end: Y-shaped shaft hole, A-type keyway, d, a 35mm, L=82mm Driven end: Y-shaped shaft hole, A-type keyway, d2-35mm, L= 82mmHTLA5 coupling 35X82JB5511--91
Example 2: HTLB10 elastic block coupling
Active end: Y-shaped shaft hole, B. type keyway, d,=90mm, L=172mm from Moving end: J-type shaft hole, B-type keyway, dz=100mm, I.-167mm HTLB10 coupling 100X167
B, 90×172
JB 5511—91
Weight
Rotation
Inertia
41.50.190
6155.9 0. 3:0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
H-shaped elastic block coupling
1 Subject content and scope of application
JB 5511—91
This standard specifies the H-shaped elastic block coupling Structural type, main dimensions and technical requirements of block coupling (hereinafter referred to as coupling). This standard is applicable to couplings that connect two coaxial transmission shaft systems and have certain compensation for the relative displacement of the two axes and buffering and shock absorption properties. The operating temperature is -30~80℃, and the nominal transmission torque is 18~63000N·m. 2 Reference standards
GB3507
GB3852
GB3931
Mechanical coupling nominal torque series
Coupling shaft hole and keyway type and ruler
Mechanical coupling terms
Gray iron castings
GB9439
GB11352
Casted carbon steel parts for general engineering purposes
JB /ZQ 4000.1
JB/ZQ 4000. 2
JB/ZQ 4000.5
General technical requirements for product inspection
General technical requirements for cutting parts
Castings General technical requirements
General technical conditions for packaging
JB/ZQ4286
Rubber Part A hardness test method
GB 1801 | | tt | | GB 1689 | | tt | Determination of the wear resistance of vulcanized rubber
Determination method of constant deformation compression permanent deformation of vulcanized rubber Rubber hot air aging test method
GB1690
Liquid resistance test method of vulcanized rubber
3 types, Basic parameters and main dimensions
3.1 Structural type
HTLA type.HTLB type-
HTLC type, HTLD type
HTLE type-
Basic type;
With brake wheel type;
-With intermediate shaft sleeve type.
3.2 The basic parameters and main dimensions should comply with the provisions of Figures 1 to 5 and Tables 1 to 5. The Ministry of Mechanical and Electronics Industry of the People's Republic of China approved the implementation on 1992-07-01 on 1991-07-01
nominal
transfer| |tt||N·m
JB 5511 - 91
Y-type shaft hole Z-type shaft hole J-type shaft hole Ji-type shaft hole Y-type shaft hole mark a
mark| |tt||Figure 1HTI.A type
Basic parameters and main dimensions of HTLA coupling table 1
Permissible speed
r/ min
HTLA231.55 000
Steel|| tt||5000
shaft hole diameter
16,18,19||tt ||20,22.24
16,18,19
20,22,24
20,22,24
635 0005 00025,28
30,32.35,38||tt ||40
50005000
30.32,35,38
40,42,45
32,35.38| |tt||HTLA6250
40,42,45,48
45005000
Shaft hole length
Y type
82|| tt||112
J, Z type
L| |tt||mm
38||tt ||44
88| |tt||112
Y type
Z type
Chongcheng
249570
422711080
311125/92
Rotate custom
1. 000. 000 3
Nominal
Torque
Permissible speed
r/min| |tt||Steel
Shaft hole diameter
10005000
10,12.45.48
50.55.56
HTLA85603500|470050,55.56
31004 20060,63,65.||tt| |HTLA9 900
IITIA101 400|2 800|3 800
HTI .AI1 2 0002 500/3 300
HT1.A12 2 800
65.70.71.75
80,85.90.95
22003000
80,85.90,95
HTIA13400020002700
JB5511
Continued Table 1|| tt||Shaft hole length
Y type
J., Z type
112184
84|| tt||107
167||tt| |132
1-12||tt| |1-417
177||tt| |212
Note: "I) Weight and moment of inertia are the largest approximate calculated values ??of each model. (2) The instantaneous overload torque shall not be greater than 2 times the nominal torque value Z-type shaft hole
J, type shaft hole
Y-type shaft hole Y-type shaft hole| |tt||Logo
Y type
Figure 2 HTLB type
140100!
1391160110
42180125
47200140| |tt||52225150
65280180
26.12|| tt||38.9
Moment of inertia
0.033| |tt||0.061
HTIR1| |tt||HTLB2
HTLB8||tt| |HTLB9
Nominal
Torque
JB 5511 -- 91
Table 2 Basic parameters and main dimensions of HTLB coupling Allowable speed
Shaft hole diameter
160 |5 000| 5 000
30,32,35,38
40′,42\,45*| |tt||32,35,38
25045005000
3554 000|5 000| |tt||560
35004700
40.42,45,48
50.55*,56*
4245,48
50.55,56||tt ||60*63',65*
50,55,56
3100|4200
70*,71 *,75*
1 4002800|3 800
80*,85*
2000/2500/3300
280022003000
400020002700
HTLB10
HTLB11
56001800|2400
65,.70,71, 75
80.85,90*
80,85,90,95
80.85,90.95
100,110
100,110,
120,125
710016002100120.125
130,140
Shaft hole length||tt ||Y type J type
84|| tt||82
112||tt| |84
142107
142107
172132
132|| tt||107
92||tt| |Das
100—80
69|160↓11095
74180
125108
167|| tt||172
212167
200140122||tt| |225150138
250165
110|280|180172
120315|200200
128350230
50|| tt||53
Weight
kg||tt| |6.0
Moment of inertia
17.80. 039
0.35| |tt||81.0 1 0. 55
HTI.B12. tt||钢
100001400
长孔进得
JB 5511—91
绝表2| |tt||长孔方法
Y型J型
110,120,125
【212
130,140,150
120,125||tt ||HTLB13
12500|1300
011700
130,140,150
HTLE14
HTLB15
HTLB16||tt ||16000|1200/1500
2000011001400
2800010001300
130,140,150
160,170
140,150
160.170.180
160,170,180
HTI.B1735500l9001200
HTLB18
HTLB19
170,180
190,200,220
450001860
11 100190,200.220
200,220
63 0008001 000
240,250
212|| tt||252
167||tt| |202
352282
410|| tt||242
B||tt| |mm
400250250
155|440265265
160|480300|300
175520315315
201560
352352 6
215610
1384| |tt||234660
注：①联辆有限公司可电视量量是按滷铁件minimum axis孔化学可以的反应值，②相行“*号的达孔图度不进行d2。 ③瞬时过进矩矩不可以公称老矩图度2倍。@)表中包装P的内得拖爪的minimum包装。 美国
Y型長孔
J型長孔
Y型長孔
图３HTIC型
416|| tt||6
weight
115||tt ||125
电影足量
219. |许用电视
JB 5511 --91
表3HTLC型联美器安全前盘和电影包括长孔化合
dt t ,d
32,35,38
25028003800
40.42.45.48
38| |tt||355
300040,42.45.18
42,45+48
560 |2 200/ 3,000| 50.55,56
HTLC4900180012400
HTL.C5| |tt||200014001900
128001100
65.70,71,75
11500||tt ||80,85,90,95
1400011001 500
80,85,90,95
100,110||tt| |长孔图像
Y型型E
60| |tt||11284
142107
142107
142107
172132
142107||tt ||85
172132
212167
172132
212167
160| |tt||167
12520092
140250100332
160250|110|38
401255
302| |tt||注：(D联美地的重盐可进矩考量是按美铁件minimum 龙孔化场计间的approximation值。2)瞬时过进矩矩不可以公称考矩固于2倍： mark||tt ||396
型美型孔小小龙孔丫型美孔
[图4HTID型
180|315/125
重前电影臚量
—kg'm\
0.172||tt ||31.8
225|400|15051
250500|165/60
28050018065
3|120.63.26
Nominal" allowable speed
Torque
Lnj| |tt||r/min
JB 5511—91
Table 4 Basic parameters and main dimensions of HILD coupling Shaft hole diameter
did?| |tt||32,35,38
HTLD1|2502 800|3 800|
40,42,45,48*
38||tt ||HTLD2
300040,42,45,48
50,55,56
HTID31 560 |2 2003 000
180012400
HT1D520001400|1900
60*,63' ,65*
60,63.65,70*
71°,75*
65,70,71,75
80 ,85,90*
HTLD6|2 800|1100|1 500| 80,85,90.95100*
180,85,90,95||tt| |HTID74 000|1 1001 500
100,110
HTLD85 6001
9001200
HTLD97100
9001200
Hole length
Y type J type
60||tt ||84
142107
142107
105|| tt||35
12520075
30||tt| |1402508033
173|160|2509538
18031510841
38|| tt||Weight
Rotation
Snap disk
25.00.148
29.20.167
225400138512
6177.5||tt| |261
132|210|40215250500|15560369119.9167
100,110,120,125 212
100,110,120,125 212|167
130,140
252|202
315|| tt||0.415
280|500|172|65 3
73131.93.56
95|1907
31563020070
350|63023074
15393||tt ||Note: (1) The weight and moment of inertia of the coupling are approximate values ??calculated based on the minimum shaft hole size of the cast iron part. ②The shaft hole diameter marked with "" is not applicable to d. ③The instantaneous overload torque shall not be greater than 2 times the nominal torque value. ③Dimension P in the table is the minimum size for disassembling the melon. 3
Nominal
Transfer box
JB 5511 --- 91
Y type Shaft hole positive shaft hole
J1 type shaft hole
Y type shaft hole. Logo
Figure 5 HTLE type
Table 5 Basic parameters and main dimensions of HTLE coupling Allowable speed
63↓5000
Countrywww.bzxz.net
Shaft hole diameter
5 000/ 25,28
10015000
30,32,35 ,38
HTLE316015 000|5 00030.32,35,3840,42,45
HTLE4||tt| |HTLE5
2504 500|5 00040.42,45,48
38||tt| |3554 000|5 00040,42,45,48
50,55,56
560 |3 500|4 700| 50,55,56|| tt||60,63,65
90031004200
「Shaft hole length
Y type
112| |tt||62
38||tt ||44
142107
112| |tt||60.63.65,70.75
1421107
95| |tt||110
100140
125||tt ||9
180115
190| |tt||44
重盘| |tt||kg
||13.30.0207
17.00.034
22.5(0.059
33.40.111
迡矩|| time|| ||钢
长孔进得
380070.71.75
HTI.F9| |tt||1200025003300
HTLE10 |2 800|2 200 |3 000 80.85, 90.95100||tt ||JB 551191
绝表5
长孔方法
Y型型
142107
172132
142107||tt| |172
212167
225236
250236
注： （）The weight and rotation inertia of the shaft is the approximate value calculated according to the minimum shaft hole size of cast iron.倍。 3.3 电影字和论混型式及分在应电影GB3852的设计。 3.4 电视与电影
3.4.1 电视电视
3.4.2结果
联长器分号号
181252
结果型式：AB 、C、D、E
联长器“联”字汉语拼音第一·个安全式弝\弹”字汉语拼音第一·个Alphabet-H 形开光块的\H\ Alphabet
tt|| |支动端：Y型量孔，A型量水，d,一35mm，L=82mm从动端：Y型量孔A型量水，d2-35mm，L=82mmHTLA5联量器35X82JB5511--91||tt ||例2:HTLB10型开工块联长器
支动端：Y型長孔，B.型论水，d,=90mm，L=172mm从动端：J型長孔，B,型论混，dz=100mm，I.-167mmHTLB10联长器100X167
B,90×172
JB 5511—91
41.50.190
6155.9 0. 3:0
HTLA5 elastic block coupling
Active end: Y-shaped shaft hole, A-type keyway, d, a 35mm, L=82mm Driven end: Y-shaped shaft hole, A-type keyway, d2-35mm, L= 82mmHTLA5 coupling 35X82JB5511--91
Example 2: HTLB10 elastic block coupling
Active end: Y-shaped shaft hole, B. type keyway, d,=90mm, L=172mm from Moving end: J-type shaft hole, B-type keyway, dz=100mm, I.-167mm HTLB10 coupling 100X167
B, 90×172
JB 5511—91
Weight
Rotation
Inertia
41.50.190
6155.9 0. 3:0
HTLA5 elastic block coupling
Active end: Y-shaped shaft hole, A-type keyway, d, a 35mm, L=82mm Driven end: Y-shaped shaft hole, A-type keyway, d2-35mm, L= 82mmHTLA5 coupling 35X82JB5511--91
Example 2: HTLB10 elastic block coupling
Active end: Y-shaped shaft hole, B. type keyway, d,=90mm, L=172mm from Moving end: J-type shaft hole, B-type keyway, dz=100mm, I.-167mm HTLB10 coupling 100X167
B, 90×172
JB 5511—91
Weight
Rotation
Inertia
41.50.190
6155.9 0. 3:0
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- HG/T 3666-2000 Pure rubber hose and rubber hose for conveying oxidized fuel in internal combustion engine fuel system
- GB 13140.5-1998 Connecting devices for low-voltage circuits for household and similar purposes Part 2: Special requirements for twist-type connecting devices
- HGJ 5-1986 Technical regulations for energy-saving design of caustic soda
- GB/T 8476-1987 Hubei White Pig
- HG/T 2499-1993 Dispersant MF
- WS 214-2001 Diagnostic criteria and management principles for epidemic Japanese encephalitis
- JB/T 8468-1996 Magnetic Particle Inspection Method for Forged Steel Parts
- GBZ/T 145-2002 Personal film dosimeter
- CJJ 74-1999 Construction and acceptance regulations for urban tunnel bridge jacking
- JB/T 6326.10-1992 Chemical analysis methods for nickel-chromium and nickel-chromium-iron alloys - Determination of carbon content by gas volumetric method
- JB/T 6144.5-1992 Cone sealing hose assembly welding cone joint
- JB 20022-2004 Tablet punching die for tablet press
- JB/T 8310.3-1996 Optical fiber cable connectors Part 3 Optical fiber cable terminal junction boxes
- SJ/T 10087.8-1991 Methods for chemical analysis for glass raw materials for colour picture tubes-Methods for chemical analysis of sodium pyroautimonate
- JGJ 85-1992 Technical specification for application of anchors, clamps and connectors for prestressed tendons JGJ85-92
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail：[email protected]