
JB/T 3238-1999 Image level
time:
2024-08-04 04:34:37
- JB/T 3238-1999
- in force
Standard ID:
JB/T 3238-1999
Standard Name:
Image level
Chinese Name:
合像水平仪
Standard category:
Machinery Industry Standard (JB)
-
Date of Release:
1999-05-20 -
Date of Implementation:
2000-01-01
Standard ICS number:
Mechanical Manufacturing>>Machine Tool Devices>>25.060.20 Indexing and Tool/Workpiece Holding DevicesChina Standard Classification Number:
Machinery>>Process Equipment>>J42 Measuring Tools and Measuring Instruments
alternative situation:
JB 3238-1983
Focal point Organization:
National Technical Committee for Standardization of Measuring Tools and InstrumentsPublishing Department:
National Technical Committee for Standardization of Measuring Tools and Instruments

Skip to download
Summary:
JB/T 3238-1999 This standard is a revision of JB 3238-83 "Coincidence Level". During the revision, only the necessary editorial changes were made according to relevant regulations, and the main technical content remained unchanged. This standard specifies the type and size, technical requirements, marking and packaging of coincidence levels with a graduation value of 0.01mm/m and a graduation range of 0~10mm/m or 0~20mm/m. This standard is applicable to coincidence levels used to measure the horizontal position and small inclination of machine tools and other types of equipment and parts. This standard was first issued in 1983. JB/T 3238-1999 Coincidence Level JB/T3238-1999 Standard Download Decompression Password: www.bzxz.net

Some standard content:
ICS25.060.20
Machinery Industry Standard of the People's Republic of China
JB/T3238—1999
Imaging Level Meter
Imaging Level Meter
Published on May 20, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3238—1999
This standard is revised on the basis of JB3238-83 "Imaging Level Meter". The technical content of this standard is consistent with that of JB3238-83, and it has only been re-edited according to relevant regulations. This standard replaces JB3238-83 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Standardization of Measuring Tools and Measuring Instruments. The responsible drafting unit of this standard: Shenyang Level Meter Factory. The main drafters of this standard: Yang Bowu and Song Chuang. This standard was first issued in 1983.
Standard of the Machinery Industry of the People's Republic of China
Imaging Level
Imaging Level Meter
JB/T3238—1999
Replaces JB323883
This standard specifies the type and size, technical requirements, marking and packaging of the imaging level with a graduation value of 0.01mm/m and a graduation range of 0~10mm/m or 0~20mm/m. This standard is applicable to the imaging level used to measure the horizontal position and small inclination of machine tools and other types of equipment and parts. 2
This standard adopts the following definitions.
2.1 Imaging Level
It is a level type level with a base measuring surface, a micrometer screw pair to adjust the bubble of the level relative to the base measuring surface, and an optical principle for imaging reading.
2.2 Graduation value
refers to the inclination of the coincident level when the indexing disk rotates one scale. This inclination is expressed as the ratio of the inclination height to the base with a reference length of 1m, unit: mm/m. 2.3 Zero position
When the coincident level is in a horizontal position, the ideal bubble position (the bubble should be symmetrical with the midpoint of the scale range) is called the zero position. At this time, the image of the level bubble formed by the prism and magnifying glass should be a smooth arc. 2.4 Zero position deviation
The reading value that deviates from the zero position.
3 Type and size
3.1 The type of the combined level is shown in the figure below (the figure is for illustration only and does not show the detailed structure). The micrometer butterfly plate is approved by the State Machinery Industry Bureau on May 20, 1999, and the level bubble is made by the Medical Group on January 1, 2000. The V-shaped T-shaped is implemented on January 1, 2000. JB/T3238-1999
3.2 The basic dimensions of the combined level are that the length of the working surface is 166mm and the angle of the V-shaped groove is 120°. 4 Technical requirements
The working surface of the combined level shall not have rust, bumps, scratches and other defects that affect its use. 4.2
The painted surface should be beautiful, without paint peeling, scratches and other defects, and other exposed non-working surfaces shall not have obvious defects such as rust. 4.3
The micrometer screw should rotate smoothly without getting stuck or jumping. When the micrometer screw rotates evenly, the bubble should move smoothly in the level bubble without stagnation or jumping. 4.4
The scale lines and numbers on the dial and scale plate should be clearly marked, and the bubble image should be clear. The distance from the upper edge of the dial edge to the surface of the indicator disk shall not be greater than 0.5mm. 4.6
4.7 The flatness of the working surface shall not be greater than 0.003mm and shall not be convex. 4.8 The zero position deviation of the working surface shall not be greater than 1/4 of the scale value, and the zero position deviation of the V-shaped working surface shall not be greater than 1/2 of the scale value. 4.9 When the combined image level is deflected 5° around the horizontal axis, the change in its indication shall not exceed 1/2 of the scale value. 4.10 When any "mm/m" scale line on the scale plate coincides with its index line, the non-coincidence between the zero scale line of the 0.01mm/m scale and its index line shall not exceed 10 scale marks.
4.11: The indication error of the coincident level relative to the "zero" scale shall not be greater than 0.02mm/m in the entire measurement range; and shall not be greater than 0.01mm/m in the range of ±1mm/m starting from the "zero" scale. 4.12 The maximum allowable value of the surface roughness R of the coincident level working surface is 0.32um, and the maximum allowable value of the surface roughness R of the V-shaped working surface is 0.63um.
4.13 The hardness of the working surface of the coincident level is 45~50HRC. 5 Marking and packaging
5.1 The coincident level shall be marked with:
a) the manufacturer's name or registered trademark; Www.bzxZ.net
b) the graduation value and graduation range.
5.2 The following marks must be on the packaging box:
a) Product name:
b) Manufacturer's name and registered trademark.
5.3 The level should be treated with rust prevention before packaging, and should be well packaged and moisture-proof measures should be taken. 5.4 The level should be accompanied by:
a) Product certificate;
b) Product manual when leaving the factory.
5.5 The packaging box should be packed into a packing box, which should be lined with moisture-proof paper. The space between the packing boxes should be filled with dry and soft materials (such as wood shavings, paper strips, etc.). The outside of the packing box should be sealed tightly to ensure that it can prevent moisture and sand erosion during long-distance transportation or storage. "Handle with care" should be marked on the packing box.
5.6 The warehouse for storing the level should be dry, clean, with moderate room temperature, and the anti-rust effect should be checked regularly. 2
Mechanical Industry Standard
Image Level
JB/T3238—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing Sheet 1/2 Number of Words 8000
Format 880×1230
First Printing in August 1999
First Edition in August 1999
Print Quantity 1-500
Price 500 Yuan
99-427
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
Machinery Industry Standard of the People's Republic of China
JB/T3238—1999
Imaging Level Meter
Imaging Level Meter
Published on May 20, 1999
National Bureau of Machinery Industry
Implemented on January 1, 2000
JB/T3238—1999
This standard is revised on the basis of JB3238-83 "Imaging Level Meter". The technical content of this standard is consistent with that of JB3238-83, and it has only been re-edited according to relevant regulations. This standard replaces JB3238-83 from the date of implementation. This standard is proposed and managed by the National Technical Committee for Standardization of Measuring Tools and Measuring Instruments. The responsible drafting unit of this standard: Shenyang Level Meter Factory. The main drafters of this standard: Yang Bowu and Song Chuang. This standard was first issued in 1983.
Standard of the Machinery Industry of the People's Republic of China
Imaging Level
Imaging Level Meter
JB/T3238—1999
Replaces JB323883
This standard specifies the type and size, technical requirements, marking and packaging of the imaging level with a graduation value of 0.01mm/m and a graduation range of 0~10mm/m or 0~20mm/m. This standard is applicable to the imaging level used to measure the horizontal position and small inclination of machine tools and other types of equipment and parts. 2
This standard adopts the following definitions.
2.1 Imaging Level
It is a level type level with a base measuring surface, a micrometer screw pair to adjust the bubble of the level relative to the base measuring surface, and an optical principle for imaging reading.
2.2 Graduation value
refers to the inclination of the coincident level when the indexing disk rotates one scale. This inclination is expressed as the ratio of the inclination height to the base with a reference length of 1m, unit: mm/m. 2.3 Zero position
When the coincident level is in a horizontal position, the ideal bubble position (the bubble should be symmetrical with the midpoint of the scale range) is called the zero position. At this time, the image of the level bubble formed by the prism and magnifying glass should be a smooth arc. 2.4 Zero position deviation
The reading value that deviates from the zero position.
3 Type and size
3.1 The type of the combined level is shown in the figure below (the figure is for illustration only and does not show the detailed structure). The micrometer butterfly plate is approved by the State Machinery Industry Bureau on May 20, 1999, and the level bubble is made by the Medical Group on January 1, 2000. The V-shaped T-shaped is implemented on January 1, 2000. JB/T3238-1999
3.2 The basic dimensions of the combined level are that the length of the working surface is 166mm and the angle of the V-shaped groove is 120°. 4 Technical requirements
The working surface of the combined level shall not have rust, bumps, scratches and other defects that affect its use. 4.2
The painted surface should be beautiful, without paint peeling, scratches and other defects, and other exposed non-working surfaces shall not have obvious defects such as rust. 4.3
The micrometer screw should rotate smoothly without getting stuck or jumping. When the micrometer screw rotates evenly, the bubble should move smoothly in the level bubble without stagnation or jumping. 4.4
The scale lines and numbers on the dial and scale plate should be clearly marked, and the bubble image should be clear. The distance from the upper edge of the dial edge to the surface of the indicator disk shall not be greater than 0.5mm. 4.6
4.7 The flatness of the working surface shall not be greater than 0.003mm and shall not be convex. 4.8 The zero position deviation of the working surface shall not be greater than 1/4 of the scale value, and the zero position deviation of the V-shaped working surface shall not be greater than 1/2 of the scale value. 4.9 When the combined image level is deflected 5° around the horizontal axis, the change in its indication shall not exceed 1/2 of the scale value. 4.10 When any "mm/m" scale line on the scale plate coincides with its index line, the non-coincidence between the zero scale line of the 0.01mm/m scale and its index line shall not exceed 10 scale marks.
4.11: The indication error of the coincident level relative to the "zero" scale shall not be greater than 0.02mm/m in the entire measurement range; and shall not be greater than 0.01mm/m in the range of ±1mm/m starting from the "zero" scale. 4.12 The maximum allowable value of the surface roughness R of the coincident level working surface is 0.32um, and the maximum allowable value of the surface roughness R of the V-shaped working surface is 0.63um.
4.13 The hardness of the working surface of the coincident level is 45~50HRC. 5 Marking and packaging
5.1 The coincident level shall be marked with:
a) the manufacturer's name or registered trademark; Www.bzxZ.net
b) the graduation value and graduation range.
5.2 The following marks must be on the packaging box:
a) Product name:
b) Manufacturer's name and registered trademark.
5.3 The level should be treated with rust prevention before packaging, and should be well packaged and moisture-proof measures should be taken. 5.4 The level should be accompanied by:
a) Product certificate;
b) Product manual when leaving the factory.
5.5 The packaging box should be packed into a packing box, which should be lined with moisture-proof paper. The space between the packing boxes should be filled with dry and soft materials (such as wood shavings, paper strips, etc.). The outside of the packing box should be sealed tightly to ensure that it can prevent moisture and sand erosion during long-distance transportation or storage. "Handle with care" should be marked on the packing box.
5.6 The warehouse for storing the level should be dry, clean, with moderate room temperature, and the anti-rust effect should be checked regularly. 2
Mechanical Industry Standard
Image Level
JB/T3238—1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
1/16 Printing Sheet 1/2 Number of Words 8000
Format 880×1230
First Printing in August 1999
First Edition in August 1999
Print Quantity 1-500
Price 500 Yuan
99-427
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.
- Recommended standards
- JB/T 8033-1999 Machine tool fixture parts and components hinge shaft
- NY/T 1381-2007 Determination of Capsaicin by High Performance Liquid Chromatography
- GBZ 71-2002 Diagnostic criteria for occupational acute chemical poisoning (general principles)
- QB/T 2381-1998 Bright gold water Bright palladium gold water
- HG/T 2085-1991 Reactive Brilliant Orange K-4G (Reactive Brilliant Orange K-GN)
- GB/T 14857-1993 Specification for studio digital television coding parameters
- GB 4480.2-2001 Food additive Carmine aluminum lake
- MT 956-2005 Flameproof water bag coating fabric for coal mines
- GB/T 4459.4-2003 Representation of springs in mechanical drawings
- HG/T 20565-1994 Calculation rules for railway loading and unloading lines, loading and unloading spaces and storage lines within chemical enterprises
- GB/T 3789.13-1991 Test method for electrical performance of transmitting tubes Test method for static characteristic curve of common-gate circuit
- GB/T 4857.8-1992 Packaging-Transport packages-Method of revolving hexagonal drum test
- HG/T 2113-1991 Horizontal vulcanization tank test method
- GB/T 11693-1994 Marine flange welded single-sided seat plate
- HG/T 2972-1999 Industrial 40% monomethylamine aqueous solution
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com