
GB/T 15965-1995 Test method for pile length of hand-knotted carpets
time:
2024-08-08 12:16:43
- GB/T 15965-1995
- Abolished
Standard ID:
GB/T 15965-1995
Standard Name:
Test method for pile length of hand-knotted carpets
Chinese Name:
手工打结地毯绒头长度的试验方法
Standard category:
National Standard (GB)
-
Date of Release:
1995-12-26 -
Date of Implementation:
1996-12-01 -
Date of Expiration:
2009-03-01
Standard ICS number:
Textile and leather technology>>Textile products>>59.080.60 Floor coveringsChina Standard Classification Number:
Textiles>>Textile Products>>W56 Blankets
alternative situation:
Replaced ZB W56006-1988; replaced by GB/T 15965-2008Procurement status:
neq ISO 2549:1972
Release date:
1995-12-26Review date:
2004-10-14Drafter:
Zhang Lu, Li XiaowenDrafting Organization:
Tianjin Carpet Research InstituteFocal point Organization:
National Carpet Standardization Technical CommitteeProposing Organization:
China Light Industry FederationPublishing Department:
State Bureau of Technical SupervisionCompetent Authority:
China Light Industry Federation

Skip to download
Summary:
This standard specifies the test method for the pile length of hand-knotted carpets. This standard is applicable to hand-knotted carpets and can also be used as a reference for hand-tufted carpets. GB/T 15965-1995 Test method for the pile length of hand-knotted carpets GB/T15965-1995 Standard download decompression password: www.bzxz.net
- Recommended standards
- JB/T 6225-1992 General technical requirements for inductive phase shifters
- GB/T 2900.58-2002 Electrical terminology Generation, transmission and distribution power system planning and management
- JB/T 2001.10-1999 Types and dimensions of circular flanges for water systems (PN=20MPa)
- GB/T 3857-1987 Test method for chemical resistance of glass fiber reinforced thermosetting plastics
- JB/T 6382.4-1992 Cone seal welding type cone thread 90. Elbow pipe joint
- GB/T 21578-2008 Dangerous goods - Koenen test method
- GB 5491-1985 Sampling and subsampling methods for inspection of grain and oilseeds
- SJ 1539-1987 Nickel and Nickel alloy bars for vacuum tubes
- JB/T 58651.2-1999 Fastener product quality classification bolts
- GB/T 2814-2003 Vertical drilling machine parameters
- JB/T 9532-1999 Technical requirements for MIG/MAG welding guns
- GB/T 8894-1988 Circular copper alloy waveguide
- GB/T 5177.3-1985 Determination of average relative molecular weight of industrial alkylbenzenes - Gas-liquid chromatography
- GB 16280-1996 Technical requirements and test methods for linear heat-sensing fire detectors
- JB/T 9936.1-1999 Parameters of flat jaw pliers for tilting machines
Please remember: "bzxz.net" is the combination of the first letters of the Chinese pinyin of the four Chinese characters "standard download" and the international top-level domain name ".net". ©2024 Standard download websitewww.bzxz.net Mail:bzxznet@163.com