JB/T 3411.5-1999 Cutting tool bar dimensions

JB/T 3411.5-1999 JB/T 3411.5-1999 Cutting tool bar dimensions JB/T3411.5-1999 Standard download decompression password: www.bzxz.net

ICS25.080.01
Machinery Industry Standard of the People's Republic of China
JB/T3411.5-1999
Dimensions of cutting tool bar
Holder for parting tool Dimensions1999-05-20 Issued
National Machinery Industry Bureau
Implementation on 2000-01-01
Machinery Industry Standard of the People's Republic of China
Dimensions of cutting tool bar
Holder for parting tool DimensionsThis standard specifies the type and size of cutting tool bar. Type and size
Type and size are as specified in the following figure and table. tA
3 marking
Marking example:
lF25mm cutting blade:
JB/T3411.51999
Approved by the State Machinery Industry Bureau on 1999-05-20L
Basic size
JB/T3411.5—1999
Replaced JB341583
15°+$
Limit deviation a1
Implementation on 2000-01-01
Basic size
15°-g
Limit deviation h13
JB/T3411.5—1999
Appendix A
(Suggested appendix)
Cutting blade| |tt||Basic size
Limit deviation h13
Basic size
Limit deviation
Mechanical industry standardWww.bzxZ.net
Cutting tool bar size
JB/T3411.5-1999
Published by the Machinery Standardization Research Institute of the Ministry of Machinery Industry Printed by the Machinery Standardization Research Institute of the Ministry of Machinery Industry (No. 2 Shouti South Road, Beijing: Postal Code 100044)*
Book size 880×1230
X number of characters xXX,XXX
Sheet X/X
Xth printing in XX month, 19XX
Xth edition in XX month, 19XX
Number of prints 1-XXX
Price XXXXX Yuan
XX-XXX
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.