JB/T 8024.2-1999 Machine tool fixture parts and component fixing handles

JB/T 8024.2-1999 JB/T 8024.2-1999 Machine tool fixture parts and components fixed handle JB/T8024.2-1999 Standard download decompression password: www.bzxz.net

ICS 25. 080. 01
Machinery Industry Standard of the People's Republic of China
The parts and units of jigs and fixtures
The parts and units of jigs and fixtures1999-08-06Promulgated
State Bureau of Machinery Industry
Implementation on 2000-01-01Www.bzxZ.net
1 Scope
Machinery Industry Standard of the People's Republic of China
Parts and units of jigs and fixtures
The parts and anits of jigs and fixturesFixed handie
This standard specifies fixed handies with specifications of 5~20mm. 2 Reference standards
JB/T8024.2-1999
Replaces JB/T8024.2-1995
The provisions contained in the following standards constitute the provisions of this standard by citing them in this standard. At the time of publication of this standard, the versions shown are valid. All standards are subject to revision, and parties using this standard should explore the possibility of using the latest versions of the following standards. GB/T700-1988 Carbon structural steel
JB/T8044--1999 Technical requirements for machine tool parts and components 3 Dimensions
The dimensions are shown in the following figure and table.
Straight grain m0.3
Approved by the State Bureau of Machinery Industry on August 6, 1999 and implemented on January 1, 2000
4 Technical conditions
JB/T8024.2—1999
4.1 Material: Q235-A in accordance with GB/T700. 4.2 Other technical conditions in accordance with JB/T8044. 5 Marking
5.1 Marking example:
Fixed handle with D-8mm and L=80mm:
Handle 8×80JB/T8024.2-1999
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.