Packaging—Basic tests for transport packages—Part 13:Low pressure test

This part of GB/T 4857 specifies the main performance requirements, test procedures and test report contents of the test equipment used in the low pressure test of transport packages and single cargo. This part is applicable to the assessment of the ability of transport packages and single cargo in pressurized cabins and non-pressurized cabins of aircraft flying at an altitude not exceeding 3500m to withstand the impact of low pressure and the protection of the contents by the packaging. For ground transport packages and single cargo at higher altitudes, low pressure tests can be carried out with reference to this part. GB/T 4857.13-2005 Packaging Basic tests for transport packages Part 13: Low pressure test methods GB/T4857.13-2005 Standard download decompression password: www.bzxz.net
This part of GB/T 4857 specifies the main performance requirements, test procedures and test report contents of the test equipment used in the low pressure test of transport packages and single cargo. This part is applicable to the assessment of the ability of transport packages and single cargoes in pressurized cabins and non-pressurized cabins of aircraft flying at an altitude not exceeding 3500m during air transport to withstand the effects of low air pressure and the ability of the packaging to protect the contents. For ground transport packages and single cargoes at higher altitudes, low air pressure tests can be carried out with reference to this part.

TC% 55, 020
National Standard of the People's Republic of China
GR/T 4857.13—2005
GB/45—2
Basic tests for transport packages
Part 13: Low pressure test method
Packaging--Basic legls fnr transport parkages-Par1 13:Low pressure test
(IS012873.2000.M0D)
Released on 2005-05-25
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China Standardization Administration of China
20D5-11-01 implementation
GB/T4857 Packaging package surface This test is divided into 2 parts, Part 1: Marking method of various parts of the city test link Part 2: Warm mixed celebration adjustment treatment:
Part 3 Static load inquiry code test monitoring method:
Part 4: Unable to lift the method:
Part 5: Falling and swimming method!
Part 6: Close dynamic test method:
Part 7: Mountain string constant moving test method: General part: Hexagonal simple test method;
Part 1: Shower test method:
Part 2: Anti-theft change test method:
Part 11: Horizontal exit certificate verification; Part 1: Low pressure test method:
Part 14: Turnover test method:
Part 5: Controllable flat impact test method!
Part 16: Stacking test method of force testing machine: Part 7: The principle of shrinkage test group
etc. 1R Shao division: Shrinkage test gradually stop number: Part 19: Circulation test information record: Part 20: Silicon control test method:
Part 1: Storage test method
etc. 3: Single core cargo transfer test method: Part 2%, mobile test method. GB/T 4857.13—2005
This part is part 13 of GB/T8=7. This part adopts international standard 1S02373:20000 Packaging inspection - complete, full-scale packaging and unit cargo condition - low-pressure test 3. Compared with GB/47.13:32 Packaging low-pressure test 1502872 standard, the main differences are as follows: Some formats have been expanded and relevant explanatory notes have been reduced.
Since my country has defined relevant technical specifications in packaging technical standards, the relevant technical specifications have been cancelled: "Test for resistance to all parts" is a continuation of the R/T1R7 series standards. The test content has been modified. The changes in the G4 requirements are as follows: In the specification, the original instrumental transport packaging was revised to be suitable for transport packages and unit materials: the original standard small \ atmospheric environment conditions representative "sensitive people Xie to A (information science and technology records). For the convenience of reference; - the relevant units of Europe have revised it according to international standards. 1
GB/T4857.13-2005
The annex A of this part is the information science annex,
This part will replace GH/T4857.13-195> from the date of implementation. This part was proposed by the National Packaging Standardization Technical Committee and the main reform units of this part: China Machinery Productivity Import and Export Center, China Export Commodity Packaging Research Institute, National Packaging Product Quality Supervision and Inspection Center South),
The main contributors to this part: Huang, Zhou Man, Zhang Lujian, Ben Shunhua, Zhou Chaochan. 1 Scope
Basic tests for packaging for transport
Part 13: Low pressure test method
GB/T4857.13-2005
(This part of GB4857 defines the main requirements for the test equipment used in the low pressure test of the transported packages and the contents of the test report. This part is used to evaluate the ability of other packages and single cargoes in non-pressurized cargo compartments not exceeding the normal cargo height during air transport to withstand the effects of low pressure and the protection of the contents. For packages and unit cargoes transported at a higher altitude, refer to this part for low pressure tests.
2 Specifications Normative references
The provisions of the following documents become the provisions of this part through reference in this part. For referenced documents with a certain period of time, all subsequent amendments and revisions shall not apply to those parts. However, parties that have reached an agreement based on this part are encouraged to investigate whether they can update the latest version of this document. For any referenced documents with a certain period of time, the latest version shall apply: B 4537.2 Temperature adjustment of packaging for transportation GB/T 4857.17 Performance test principle of color transport packaging 3 Test principle
Place the test food in the pressure test box! Then reduce the air in the box to the equivalent of 35m3/s. Keep the air pressure at 35m3/s. Maintain the pressure for a predetermined time and return it to normal pressure. If necessary, the pressure should be controlled at the same temperature during this period. Appendix A) 4 Test setup
The pressure test should have enough time to accept the test sample, and the pressure and temperature should be adjusted to meet the requirements of Part 5.1.
5 Test procedure
5.1 Preparation of test samples
Prepare the test samples according to the requirements of 614857.1: 5.2 Screening of test samples
Select the test samples according to the provisions of GB/T 18,1. 5.3 Pretreatment of test samples
According to the provisions of GB/T 18,1, select a type of test sample to pretreat the test sample with temperature and humidity. 5.4 Test steps 5.4.1 Place the test product in the gas positive test chamber, and reduce the gas pressure to 653m! 5% at a speed not exceeding 15010ma/min, and keep it within 2h1h, 8h.16h within the pre-decomposition time. 5.4.2 Fill the test product with air at a rate not exceeding 15n×.[0mPa/min to a temperature that meets the test requirements. Allow the gas to recover to the good state.
0B/T4857.13-2005
5.4.3 After the test, report the damage of the packaging and contents to the relevant standards and report the test results: 6 Acid test report The test report should include the following contents:
Description of the test system and implementation of this part:
The content, specification, model, quantity, etc. b
Number of test samples
Detailed description: packaging content name, size, structure and material, accessories, cushioning and support materials, sealing method, oil bottle retraction state and total elongation protection,
Quality record of test samples and quality of contents: in kilograms, expected temperature change, temperature and pressure in the test box, monitoring rate and time of gas increase (decrease), test equipment and instruments,
Record of test results and Correctly interpret the results of the test! 3
Any difference between the test methods described in this part; Test date Tester signature, test form. k)
Appendix A
(Informative Appendix)
Pressure and temperature of non-pressurized cabin
GE/14857.13—2005
When the transport package is transported in a non-pressurized cabin with a flight altitude exceeding 3500m, the pressure and temperature of Table A, 1 can be used for low-pressure tests.
Table A, 1 Environmental conditions outside the atmosphere
B oriobzxz.net
12 coc
15 fon
Pressure/hPa(mbar)
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.