GB/T 4229-1984 Calculation method for weight of stainless steel plates

This standard applies to the weight calculation method of steel plates of grades specified in GB 4237-84 "Hot-rolled Stainless Steel Plates" and GB 3280-84 "Cold-rolled Stainless Steel Plates". The weight calculation method of steel plates of grades not specified in this standard shall be determined by negotiation between the supply and demand parties. GB/T 4229-1984 Weight calculation method of stainless steel plates GB/T4229-1984 standard download decompression password: www.bzxz.net

UDC 669.14.018.821-41:531.751 National Standard of the People's Republic of China
GB4229—84
Methods of weight calculation of stainlesssteel plates and sheets
Published on 1984-03-26
Year Star!
1985-03-01 implementation
National Standard of the People's Republic of China
Methods of weight calculation of stainless steel plates and sheets
UDC 669.14.018
821-41
GB4229-84
This standard applies to the weight calculation method of steel plates (hereinafter referred to as steel plates) of grades specified in GB4237-84 "Hot-rolled stainless steel plates" and GB3280-84 "Cold-rolled stainless steel plates". The weight calculation method of steel plates of grades not specified in this standard shall be determined by negotiation between the supply and demand parties.
1 Weight calculation method
1.1 The weight of the steel plate is calculated using the nominal size. When the thickness allowable deviation is specified as a positive deviation or a negative deviation, it is calculated using the average value of the upper and lower limits of the deviation and the sum of the nominal size. 1.2 The basic weight of a steel plate refers to the weight of a steel plate with a thickness of 1mm and an area of ​​1m2, as shown in the following table. 1.3 The unit weight (kg/m2) refers to the weight of a steel plate with an area of ​​1m2, which is the basic weight multiplied by the thickness of the steel plate (mm), rounded to four significant figures.
1.4 The weight of a sheet of steel plate is the unit weight multiplied by the area (m2). The area should be rounded to four significant figures, and the weight of a sheet of steel plate should be rounded to three significant figures. When the weight of a sheet exceeds 1000kg, it should be rounded to an integer in kg. 1.5 The total weight is the weight of a sheet of steel plate multiplied by the total number of sheets of the same grade and size, and rounded to an integer in kg. 1.6 The method of rounding off numbers shall be in accordance with the provisions of Appendix C of GB1.1-81 "General Provisions for the Preparation of Standards in the Guidelines for Standardization Work". Issued by the National Bureau of Standards on March 26, 1984
Implemented on March 1, 1985
1Cr17Mn6Ni5N
ICr18Mn8Ni5N
1Cr17Ni7
1Cr17Ni8
ICr18Ni9
[Cr18NigSi3
oCr19Nig
00Cr19Ni11
oCr19Ni9N
00 Cr18Ni10N
ICr18Ni12
OCr23N13bzxZ.net
0Cr25Ni20
00Cr17Mo
0Cr26Ni5Mo2
0Cr13Al
00Cr12
Additional notes:
GB4229--84
Basic weight of steel plate
Basic weight
This standard is proposed by the Ministry of Metallurgical Industry of the People's Republic of China. Brand
OCr17Ni12Moz
00Cr17Ni14Mo2
0Cr17Ni12Mo2N
00Cr17Ni13Mo2N
0Cr 18Ni12Mo2Cu2
00Cr18Ni14Mo2Cu2
0Cr19Ni13M03
00Cr19Ni13Mo3
0Cr18Ni16 Mo5
oCr18NiliTi
oCr18Ni11Nb
0Cr18Ni13Si4
00Cr18Mo2
00Cr30Mo2
00Cr17
1Cr17Mo
00Cr27Mo
OCr17Ni7Al
This standard was drafted by Taiyuan Iron and Steel Company and the Standardization Research Institute of the Ministry of Metallurgical Industry. The main drafters of this standard are Gao Zongren and Teng Changling. kg
Basic weight
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.