GB 18559-2001 Occupational exposure limits for trinitrotoluene in workplace air

This standard specifies the maximum permissible concentration and time-weighted average permissible concentration of trinitrotoluene in the air of a workplace and the monitoring and testing methods. This standard is applicable to various workplaces where trinitrotoluene is produced and used. GB 18559-2001 Occupational exposure limits for trinitrotoluene in the air of a workplace GB18559-2001 Standard download decompression password: www.bzxz.net

GB 18559—2001
This standard is formulated based on experimental research, on-site labor hygiene surveys, occupational population survey data, and participation in relevant foreign health standards. It is a standard used for workplace environment monitoring and health supervision. In the past, all industries producing and using trinitrotoluene in China applied the standard of "benzene and its homologues of di- and trinitro compounds (dinitrobenzene, trinitrotoluene, etc.) (pi)" 1 mg/m3 in TJ 36-1979 "Industrial Enterprise Design Hygiene Standard" promulgated in 1979. Enterprises producing and using trinitrotoluene should implement this standard from the date of implementation of this standard.
This standard is proposed by the Ministry of Health of the People's Republic of China. The drafting unit of this standard is the Ordnance Industry Hygiene Research Institute. The main drafters of this standard are Zuo Hongkong, Zhang Peng, Xia Baoqing, Li Bin, and Xu Changan. This standard is entrusted to the technical management unit, the Institute of Labor Hygiene and Occupational Diseases of the Chinese Academy of Preventive Medicine, for interpretation.722
1 Scope
National Standard of the People's Republic of China
Occupational exposure limit for trinitrotoluene in workshop air wrkplace
GB18559-2001
This standard specifies the maximum allowable concentration and time-weighted average allowable concentration of trinitrotoluene in workshop air and the monitoring and inspection method. This standard is applicable to various workplaces where trinitrotoluene is produced and used. 2 Referenced standardsbzxz.net
The provisions contained in the following standards constitute the provisions of this standard through reference in this standard. When this standard is published, the versions shown are valid. All standards will be revised, and parties using this standard should explore the possibility of using the latest version of the following standards. GB/T1611 3-1995 Gas chromatography determination method for trinitrotoluene in workshop air 3 Hygiene requirements
The maximum permissible concentration of trinitrotoluene in workshop air is 0.5 mg/m (skin), and the time-weighted average permissible concentration is 0.2 mk/m* (skin).
4 Monitoring and inspection methods
. The monitoring and inspection method for trinitrotoluene concentration in workshop air shall be implemented in accordance with GB/T16113. Approved by the General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China on December 4, 2001 irKAoNrKAca
Implementation on May 1, 2002
Tip: This standard content only shows part of the intercepted content of the complete standard. If you need the complete standard, please go to the top to download the complete standard document for free.